From: Ley Foon Tan <ley.foon.tan@intel.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>,
linux-kernel@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, lftan.linux@gmail.com
Subject: Re: [PATCH v4 1/3] PCI: altera: Add Stratix 10 PCIe support
Date: Mon, 25 Feb 2019 17:35:07 +0800 [thread overview]
Message-ID: <1551087307.2534.16.camel@intel.com> (raw)
In-Reply-To: <20190219162313.GB21833@e107981-ln.cambridge.arm.com>
On Tue, 2019-02-19 at 16:23 +0000, Lorenzo Pieralisi wrote:
> On Thu, Feb 14, 2019 at 11:20:36PM +0800, Ley Foon Tan wrote:
> >
> > Add PCIe Root Port support for Stratix 10 device.
> >
> > Main differences:
> Main differences with what ? We need to rewrite this commit log.
Differences compare with Cyclone V and Arria 10 devices.
I will rewrite this.
>
> >
> > - HIP interface to access Root Port configuration register.
> > - TLP programming flow:
> > - One REG0 register
> > - Don't need to check alignment
> >
> > Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
> > ---
> > drivers/pci/controller/pcie-altera.c | 246
> > ++++++++++++++++++++++++++++++----
> > 1 files changed, 222 insertions(+), 24 deletions(-)
> >
> > diff --git a/drivers/pci/controller/pcie-altera.c
> > b/drivers/pci/controller/pcie-altera.c
> > index 7d05e51..76bb6a6 100644
> > --- a/drivers/pci/controller/pcie-altera.c
> > +++ b/drivers/pci/controller/pcie-altera.c
> > @@ -11,6 +11,7 @@
> > #include <linux/irqchip/chained_irq.h>
> > #include <linux/init.h>
> > #include <linux/of_address.h>
> > +#include <linux/of_device.h>
> > #include <linux/of_irq.h>
> > #include <linux/of_pci.h>
> > #include <linux/pci.h>
> > @@ -37,7 +38,12 @@
> > #define RP_LTSSM_MASK 0x1f
> > #define LTSSM_L0 0xf
> >
> > -#define PCIE_CAP_OFFSET 0x80
> > +#define S10_RP_TX_CNTRL 0x2004
> > +#define S10_RP_RXCPL_REG 0x2008
> > +#define S10_RP_RXCPL_STATUS 0x200C
> > +#define S10_RP_CFG_ADDR(pcie, reg) \
> > + (((pcie)->hip_base) + (reg) + (1 << 20))
> > +
> > /* TLP configuration type 0 and 1 */
> > #define TLP_FMTTYPE_CFGRD0 0x04 /*
> > Configuration Read Type 0 */
> > #define TLP_FMTTYPE_CFGWR0 0x44 /*
> > Configuration Write Type 0 */
> > @@ -49,18 +55,19 @@
> > #define RP_DEVFN 0
> > #define TLP_REQ_ID(bus, devfn) (((bus) << 8) |
> > (devfn))
> > #define TLP_CFGRD_DW0(pcie, bus)
> > \
> > - ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGRD0
> > \
> > - : TLP_FMTTYPE_CFGRD1) << 24) |
> > \
> > - TLP_PAYLOAD_SIZE)
> > + ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgrd0
> > \
> > + : pcie->pcie_data->cfgrd1) << 24)
> > | \
> > + TLP_PAYLOAD_SIZE)
> > #define TLP_CFGWR_DW0(pcie, bus)
> > \
> > - ((((bus == pcie->root_bus_nr) ? TLP_FMTTYPE_CFGWR0
> > \
> > - : TLP_FMTTYPE_CFGWR1) << 24) |
> > \
> > - TLP_PAYLOAD_SIZE)
> > + ((((bus == pcie->root_bus_nr) ? pcie->pcie_data->cfgwr0
> > \
> > + : pcie->pcie_data->cfgwr1) << 24)
> > | \
> > + TLP_PAYLOAD_SIZE)
> > #define TLP_CFG_DW1(pcie, tag, be) \
> > - (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag <<
> > 8) | (be))
> > + (((TLP_REQ_ID(pcie->root_bus_nr, RP_DEVFN)) << 16) | (tag
> > << 8) | (be))
> > #define TLP_CFG_DW2(bus, devfn, offset) \
> > (((bus) << 24) | ((devfn) << 16) |
> > (offset))
> > #define TLP_COMP_STATUS(s) (((s) >> 13) & 7)
> > +#define TLP_BYTE_COUNT(s) (((s) >> 0) & 0xfff)
> > #define TLP_HDR_SIZE 3
> > #define TLP_LOOP 500
> >
> > @@ -69,14 +76,43 @@
> >
> > #define DWORD_MASK 3
> >
> > +#define S10_TLP_FMTTYPE_CFGRD0 0x05
> > +#define S10_TLP_FMTTYPE_CFGRD1 0x04
> > +#define S10_TLP_FMTTYPE_CFGWR0 0x45
> > +#define S10_TLP_FMTTYPE_CFGWR1 0x44
> > +
> > +enum altera_pcie_version {
> > + ALTERA_PCIE_V1 = 0,
> > + ALTERA_PCIE_V2,
> > +};
> > +
> > struct altera_pcie {
> > struct platform_device *pdev;
> > - void __iomem *cra_base; /* DT Cra */
> > + void __iomem *cra_base;
> > + void __iomem *hip_base;
> > int irq;
> > u8 root_bus_nr;
> > struct irq_domain *irq_domain;
> > struct resource bus_range;
> > struct list_head resources;
> > + const struct altera_pcie_data *pcie_data;
> > +};
> > +
> > +struct altera_pcie_data {
> > + int (*tlp_read_pkt)(struct altera_pcie *pcie, u32 *value);
> > + void (*tlp_write_pkt)(struct altera_pcie *pcie, u32
> > *headers,
> > + u32 data, bool align);
> > + bool (*get_link_status)(struct altera_pcie *pcie);
> > + int (*rp_read_cfg)(struct altera_pcie *pcie, int where,
> > + int size, u32 *value);
> > + int (*rp_write_cfg)(struct altera_pcie *pcie, u8 bus, int
> > where,
> > + int size, u32 value);
> > + enum altera_pcie_version version;
> > + u32 cap_offset; /* PCIe capability
> > structure register offset */
> This is a duplication of struct pci_dev.pcie_cap right ?
This is register offset in PCIe Rootport IP to access PCIe Cap
structure register of directly RP. This allow us to access PCIe cap
struct register without pci_dev.
>
> >
> > + u32 cfgrd0;
> > + u32 cfgrd1;
> > + u32 cfgwr0;
> > + u32 cfgwr1;
> > };
> >
> > struct tlp_rp_regpair_t {
> > @@ -101,6 +137,15 @@ static bool altera_pcie_link_up(struct
> > altera_pcie *pcie)
> > return !!((cra_readl(pcie, RP_LTSSM) & RP_LTSSM_MASK) ==
> > LTSSM_L0);
> > }
> >
> > +static bool s10_altera_pcie_link_up(struct altera_pcie *pcie)
> > +{
> > + void __iomem *addr = S10_RP_CFG_ADDR(pcie,
> > + pcie->pcie_data->cap_offset +
> > + PCI_EXP_LNKSTA);
> > +
> > + return !!(readw(addr) & PCI_EXP_LNKSTA_DLLLA);
> > +}
> > +
> > /*
> > * Altera PCIe port uses BAR0 of RC's configuration space as the
> > translation
> > * from PCI bus to native BUS. Entire DDR region is mapped into
> > PCIe space
> > @@ -128,12 +173,18 @@ static void tlp_write_tx(struct altera_pcie
> > *pcie,
> > cra_writel(pcie, tlp_rp_regdata->ctrl, RP_TX_CNTRL);
> > }
> >
> > +static void s10_tlp_write_tx(struct altera_pcie *pcie, u32 reg0,
> > u32 ctrl)
> > +{
> > + cra_writel(pcie, reg0, RP_TX_REG0);
> > + cra_writel(pcie, ctrl, S10_RP_TX_CNTRL);
> > +}
> > +
> > static bool altera_pcie_valid_device(struct altera_pcie *pcie,
> > struct pci_bus *bus, int dev)
> > {
> > /* If there is no link, then there is no device */
> > if (bus->number != pcie->root_bus_nr) {
> > - if (!altera_pcie_link_up(pcie))
> > + if (!pcie->pcie_data->get_link_status(pcie))
> > return false;
> > }
> >
> > @@ -183,6 +234,46 @@ static int tlp_read_packet(struct altera_pcie
> > *pcie, u32 *value)
> > return PCIBIOS_DEVICE_NOT_FOUND;
> > }
> >
> > +static int s10_tlp_read_packet(struct altera_pcie *pcie, u32
> > *value)
> > +{
> > + int i;
> > + u32 ctrl;
> > + u32 comp_status;
> > + u32 dw[4];
> > + u32 count = 0;
> > +
> > + for (i = 0; i < TLP_LOOP; i++) {
> > + ctrl = cra_readl(pcie, S10_RP_RXCPL_STATUS);
> > + if (!(ctrl & RP_RXCPL_SOP))
> > + continue;
> > +
> > + /* Read first DW */
> > + dw[count++] = cra_readl(pcie, S10_RP_RXCPL_REG);
> > +
> > + /* Poll for EOP */
> > + for (i = 0; i < TLP_LOOP; i++) {
> > + ctrl = cra_readl(pcie,
> > S10_RP_RXCPL_STATUS);
> > + dw[count++] = cra_readl(pcie,
> > S10_RP_RXCPL_REG);
> I think you'd better add a check on count lest it can overflow dw[].
Okay, will check that.
>
> >
> > + if (ctrl & RP_RXCPL_EOP) {
> > + comp_status =
> > TLP_COMP_STATUS(dw[1]);
> > + if (comp_status)
> > + return
> > PCIBIOS_DEVICE_NOT_FOUND;
> > +
> > + if (value &&
> > + TLP_BYTE_COUNT(dw[1]) ==
> > sizeof(u32) &&
> > + count >= 3)
> > + *value = dw[3];
> > +
> > + return PCIBIOS_SUCCESSFUL;
> > + }
> > + }
> > +
> > + udelay(5);
> > + }
> > +
> > + return PCIBIOS_DEVICE_NOT_FOUND;
> > +}
> > +
> > static void tlp_write_packet(struct altera_pcie *pcie, u32
> > *headers,
> > u32 data, bool align)
> > {
> > @@ -210,6 +301,15 @@ static void tlp_write_packet(struct
> > altera_pcie *pcie, u32 *headers,
> > tlp_write_tx(pcie, &tlp_rp_regdata);
> > }
> >
> > +static void s10_tlp_write_packet(struct altera_pcie *pcie, u32
> > *headers,
> > + u32 data, bool dummy)
> > +{
> > + s10_tlp_write_tx(pcie, headers[0], RP_TX_SOP);
> > + s10_tlp_write_tx(pcie, headers[1], 0);
> > + s10_tlp_write_tx(pcie, headers[2], 0);
> > + s10_tlp_write_tx(pcie, data, RP_TX_EOP);
> > +}
> > +
> > static int tlp_cfg_dword_read(struct altera_pcie *pcie, u8 bus,
> > u32 devfn,
> > int where, u8 byte_en, u32 *value)
> > {
> > @@ -219,9 +319,9 @@ static int tlp_cfg_dword_read(struct
> > altera_pcie *pcie, u8 bus, u32 devfn,
> > headers[1] = TLP_CFG_DW1(pcie, TLP_READ_TAG, byte_en);
> > headers[2] = TLP_CFG_DW2(bus, devfn, where);
> >
> > - tlp_write_packet(pcie, headers, 0, false);
> > + pcie->pcie_data->tlp_write_pkt(pcie, headers, 0, false);
> >
> > - return tlp_read_packet(pcie, value);
> > + return pcie->pcie_data->tlp_read_pkt(pcie, value);
> > }
> >
> > static int tlp_cfg_dword_write(struct altera_pcie *pcie, u8 bus,
> > u32 devfn,
> > @@ -236,11 +336,11 @@ static int tlp_cfg_dword_write(struct
> > altera_pcie *pcie, u8 bus, u32 devfn,
> >
> > /* check alignment to Qword */
> > if ((where & 0x7) == 0)
> > - tlp_write_packet(pcie, headers, value, true);
> > + pcie->pcie_data->tlp_write_pkt(pcie, headers,
> > value, true);
> > else
> > - tlp_write_packet(pcie, headers, value, false);
> > + pcie->pcie_data->tlp_write_pkt(pcie, headers,
> > value, false);
> >
> > - ret = tlp_read_packet(pcie, NULL);
> > + ret = pcie->pcie_data->tlp_read_pkt(pcie, NULL);
> > if (ret != PCIBIOS_SUCCESSFUL)
> > return ret;
> >
> > @@ -254,6 +354,53 @@ static int tlp_cfg_dword_write(struct
> > altera_pcie *pcie, u8 bus, u32 devfn,
> > return PCIBIOS_SUCCESSFUL;
> > }
> >
> > +static int s10_rp_read_cfg(struct altera_pcie *pcie, int where,
> > + int size, u32 *value)
> > +{
> > + void *addr = S10_RP_CFG_ADDR(pcie, where);
> > +
> > + switch (size) {
> > + case 1:
> > + *value = readb(addr);
> > + break;
> > + case 2:
> > + *value = readw(addr);
> > + break;
> > + default:
> > + *value = readl(addr);
> > + break;
> > + }
> This boilerplace could be avoided if you used generic config
> accessors (ie pci_generic_config_read()/write()).
Okay. I will change this.
>
> >
> > +
> > + return PCIBIOS_SUCCESSFUL;
> > +}
> > +
> > +static int s10_rp_write_cfg(struct altera_pcie *pcie, u8 bus, int
> > where,
> > + int size, u32 value)
> > +{
> > + void *addr = S10_RP_CFG_ADDR(pcie, where);
> > +
> > + switch (size) {
> > + case 1:
> > + writeb(value, addr);
> > + break;
> > + case 2:
> > + writew(value, addr);
> > + break;
> > + default:
> > + writel(value, addr);
> > + break;
> > + }
> Ditto.
Noted.
>
> >
> > +
> > + /*
> > + * Monitor changes to PCI_PRIMARY_BUS register on root
> > port
> > + * and update local copy of root bus number accordingly.
> > + */
> > + if (bus == pcie->root_bus_nr && where == PCI_PRIMARY_BUS)
> > + pcie->root_bus_nr = value & 0xff;
> > +
> > + return PCIBIOS_SUCCESSFUL;
> > +}
> > +
> > static int _altera_pcie_cfg_read(struct altera_pcie *pcie, u8
> > busno,
> > unsigned int devfn, int where,
> > int size,
> > u32 *value)
> > @@ -262,6 +409,9 @@ static int _altera_pcie_cfg_read(struct
> > altera_pcie *pcie, u8 busno,
> > u32 data;
> > u8 byte_en;
> >
> > + if (busno == pcie->root_bus_nr && pcie->pcie_data-
> > >rp_read_cfg)
> > + return pcie->pcie_data->rp_read_cfg(pcie, where,
> > size, value);
> > +
> > switch (size) {
> > case 1:
> > byte_en = 1 << (where & 3);
> > @@ -302,6 +452,10 @@ static int _altera_pcie_cfg_write(struct
> > altera_pcie *pcie, u8 busno,
> > u32 shift = 8 * (where & 3);
> > u8 byte_en;
> >
> > + if (busno == pcie->root_bus_nr && pcie->pcie_data-
> > >rp_write_cfg)
> > + return pcie->pcie_data->rp_write_cfg(pcie, busno,
> > where,
> > + size,
> > value);
> > +
> > switch (size) {
> > case 1:
> > data32 = (value & 0xff) << shift;
> > @@ -365,7 +519,8 @@ static int altera_read_cap_word(struct
> > altera_pcie *pcie, u8 busno,
> > int ret;
> >
> > ret = _altera_pcie_cfg_read(pcie, busno, devfn,
> > - PCIE_CAP_OFFSET + offset,
> > sizeof(*value),
> > + pcie->pcie_data->cap_offset +
> > offset,
> > + sizeof(*value),
> > &data);
> > *value = data;
> > return ret;
> > @@ -375,7 +530,8 @@ static int altera_write_cap_word(struct
> > altera_pcie *pcie, u8 busno,
> > unsigned int devfn, int offset,
> > u16 value)
> > {
> > return _altera_pcie_cfg_write(pcie, busno, devfn,
> > - PCIE_CAP_OFFSET + offset,
> > sizeof(value),
> > + pcie->pcie_data->cap_offset
> > + offset,
> > + sizeof(value),
> > value);
> > }
> >
> > @@ -403,7 +559,7 @@ static void altera_wait_link_retrain(struct
> > altera_pcie *pcie)
> > /* Wait for link is up */
> > start_jiffies = jiffies;
> > for (;;) {
> > - if (altera_pcie_link_up(pcie))
> > + if (pcie->pcie_data->get_link_status(pcie))
> > break;
> >
> > if (time_after(jiffies, start_jiffies +
> > LINK_UP_TIMEOUT)) {
> > @@ -418,7 +574,7 @@ static void altera_pcie_retrain(struct
> > altera_pcie *pcie)
> > {
> > u16 linkcap, linkstat, linkctl;
> >
> > - if (!altera_pcie_link_up(pcie))
> > + if (!pcie->pcie_data->get_link_status(pcie))
> > return;
> >
> > /*
> > @@ -540,12 +696,20 @@ static int altera_pcie_parse_dt(struct
> > altera_pcie *pcie)
> > struct device *dev = &pcie->pdev->dev;
> > struct platform_device *pdev = pcie->pdev;
> > struct resource *cra;
> > + struct resource *hip;
> >
> > cra = platform_get_resource_byname(pdev, IORESOURCE_MEM,
> > "Cra");
> > pcie->cra_base = devm_ioremap_resource(dev, cra);
> > if (IS_ERR(pcie->cra_base))
> > return PTR_ERR(pcie->cra_base);
> >
> > + if (pcie->pcie_data->version == ALTERA_PCIE_V2) {
> > + hip = platform_get_resource_byname(pdev,
> > IORESOURCE_MEM, "Hip");
> > + pcie->hip_base = devm_ioremap_resource(&pdev->dev,
> > hip);
> > + if (IS_ERR(pcie->hip_base))
> > + return PTR_ERR(pcie->hip_base);
> > + }
> > +
> > /* setup IRQ */
> > pcie->irq = platform_get_irq(pdev, 0);
> > if (pcie->irq < 0) {
> > @@ -562,6 +726,38 @@ static void altera_pcie_host_init(struct
> > altera_pcie *pcie)
> > altera_pcie_retrain(pcie);
> > }
> >
> > +static struct altera_pcie_data pci_1_0_data = {
> > + .tlp_read_pkt = tlp_read_packet,
> > + .tlp_write_pkt = tlp_write_packet,
> > + .get_link_status = altera_pcie_link_up,
> > + .cap_offset = 0x80,
> > + .version = ALTERA_PCIE_V1,
> > + .cfgrd0 = TLP_FMTTYPE_CFGRD0,
> > + .cfgrd1 = TLP_FMTTYPE_CFGRD1,
> > + .cfgwr0 = TLP_FMTTYPE_CFGWR0,
> > + .cfgwr1 = TLP_FMTTYPE_CFGWR1,
> > +};
> > +
> > +static struct altera_pcie_data pci_2_0_data = {
> > + .tlp_read_pkt = s10_tlp_read_packet,
> > + .tlp_write_pkt = s10_tlp_write_packet,
> > + .get_link_status = s10_altera_pcie_link_up,
> > + .rp_read_cfg = s10_rp_read_cfg,
> > + .rp_write_cfg = s10_rp_write_cfg,
> > + .version = ALTERA_PCIE_V2,
> > + .cap_offset = 0x70,
> > + .cfgrd0 = S10_TLP_FMTTYPE_CFGRD0,
> > + .cfgrd1 = S10_TLP_FMTTYPE_CFGRD1,
> > + .cfgwr0 = S10_TLP_FMTTYPE_CFGWR0,
> > + .cfgwr1 = S10_TLP_FMTTYPE_CFGWR1,
> > +};
> I wonder if it is not better to have two different struct pci_ops
> (and
> have a pointer to them in struct altera_pcie_data) instead of all
> these
> parameters (most of which are there to differentiate struct pci_ops
> methods).
>
> See also my comments above.
>
> In the end I guess it depends on how many host bridges will be based
> on
> this IP as design, what you did is OK but it is worth thinking about
> it.
>
We have 2 versions of HW based on this IP as for now. May have new
version in future.
I can move all callback functions to struct pci_ops and have a pointer
in struct altera_pcie_data.
Thanks.
Regards
Ley Foon
next prev parent reply other threads:[~2019-02-25 9:35 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-14 15:20 [PATCH v4 0/3] Add Stratix 10 PCIe Root Port support Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 1/3] PCI: altera: Add Stratix 10 PCIe support Ley Foon Tan
2019-02-19 16:23 ` Lorenzo Pieralisi
2019-02-25 9:35 ` Ley Foon Tan [this message]
2019-02-26 7:07 ` Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 2/3] PCI: altera: Enable driver on ARM64 Ley Foon Tan
2019-02-14 15:20 ` [PATCH v4 3/3] dt-bindings: PCI: altera: Add altr,pcie-root-port-2.0 Ley Foon Tan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551087307.2534.16.camel@intel.com \
--to=ley.foon.tan@intel.com \
--cc=bhelgaas@google.com \
--cc=devicetree@vger.kernel.org \
--cc=lftan.linux@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.