From: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
To: linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org,
mark.rutland-5wv7dgnIgG8@public.gmane.org,
chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
kishon-l0cyMroinI0@public.gmane.org,
martin.petersen-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org,
avri.altman-Sjgp3cTcYWE@public.gmane.org,
alim.akhtar-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org,
pedrom.sousa-HKixBCOQz3hWk0Htik3J/w@public.gmane.org
Cc: chun-hung.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
kuohong.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org,
matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org,
linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
liwei213-hv44wF8Li93QT0dZR+AlfA@public.gmane.org,
vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
subhashj-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org,
Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>,
peter.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org
Subject: [PATCH v3 6/7] phy: mediatek: Add UFS M-PHY driver
Date: Wed, 27 Feb 2019 15:23:11 +0800 [thread overview]
Message-ID: <1551252192-535-8-git-send-email-stanley.chu@mediatek.com> (raw)
In-Reply-To: <1551252192-535-1-git-send-email-stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
Add UFS M-PHY driver on MediaTek chipsets.
Signed-off-by: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
---
drivers/phy/mediatek/Kconfig | 9 ++
drivers/phy/mediatek/Makefile | 1 +
drivers/phy/mediatek/phy-mtk-ufs.c | 239 +++++++++++++++++++++++++++++
3 files changed, 249 insertions(+)
create mode 100644 drivers/phy/mediatek/phy-mtk-ufs.c
diff --git a/drivers/phy/mediatek/Kconfig b/drivers/phy/mediatek/Kconfig
index 8857d00b3c65..4a20110a511d 100644
--- a/drivers/phy/mediatek/Kconfig
+++ b/drivers/phy/mediatek/Kconfig
@@ -21,3 +21,12 @@ config PHY_MTK_XSPHY
Enable this to support the SuperSpeedPlus XS-PHY transceiver for
USB3.1 GEN2 controllers on MediaTek chips. The driver supports
multiple USB2.0, USB3.1 GEN2 ports.
+
+config PHY_MTK_UFS
+ tristate "MediaTek UFS M-PHY driver"
+ depends on ARCH_MEDIATEK && OF
+ select GENERIC_PHY
+ help
+ Support for UFS M-PHY on MediaTek chipsets. Enable this to provide
+ vendor-specific initialization, power on and off flow of specified
+ M-PHYs.
diff --git a/drivers/phy/mediatek/Makefile b/drivers/phy/mediatek/Makefile
index ee49edc97ee9..14e9aa0b8aa4 100644
--- a/drivers/phy/mediatek/Makefile
+++ b/drivers/phy/mediatek/Makefile
@@ -5,3 +5,4 @@
obj-$(CONFIG_PHY_MTK_TPHY) += phy-mtk-tphy.o
obj-$(CONFIG_PHY_MTK_XSPHY) += phy-mtk-xsphy.o
+obj-$(CONFIG_PHY_MTK_UFS) += phy-mtk-ufs.o
diff --git a/drivers/phy/mediatek/phy-mtk-ufs.c b/drivers/phy/mediatek/phy-mtk-ufs.c
new file mode 100644
index 000000000000..7375ad83af05
--- /dev/null
+++ b/drivers/phy/mediatek/phy-mtk-ufs.c
@@ -0,0 +1,239 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 MediaTek Inc.
+ * Author: Stanley Chu <stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+
+/* mphy register and offsets */
+#define MP_GLB_DIG_8C 0x008C
+#define FRC_PLL_ISO_EN BIT(8)
+#define PLL_ISO_EN BIT(9)
+#define FRC_FRC_PWR_ON BIT(10)
+#define PLL_PWR_ON BIT(11)
+
+#define MP_LN_DIG_RX_9C 0xA09C
+#define FSM_DIFZ_FRC BIT(18)
+
+#define MP_LN_DIG_RX_AC 0xA0AC
+#define FRC_RX_SQ_EN BIT(0)
+#define RX_SQ_EN BIT(1)
+
+#define MP_LN_RX_44 0xB044
+#define FRC_CDR_PWR_ON BIT(17)
+#define CDR_PWR_ON BIT(18)
+#define FRC_CDR_ISO_EN BIT(19)
+#define CDR_ISO_EN BIT(20)
+
+#define mphy_readl(phy, ofs) readl((phy)->mmio + (ofs))
+#define mphy_writel(phy, val, ofs) writel((val), (phy)->mmio + (ofs))
+
+struct ufs_mtk_phy {
+ struct device *dev;
+ void __iomem *mmio;
+ struct clk *mp_clk;
+ struct clk *unipro_clk;
+};
+
+static inline void mphy_set_bit(struct ufs_mtk_phy *phy, u32 reg, u32 ofs)
+{
+ u32 val;
+
+ val = mphy_readl(phy, reg);
+ val |= ofs;
+ mphy_writel(phy, val, reg);
+}
+
+static inline void mphy_clr_bit(struct ufs_mtk_phy *phy, u32 reg, u32 ofs)
+{
+ u32 val;
+
+ val = mphy_readl(phy, reg);
+ val &= ~ofs;
+ mphy_writel(phy, val, reg);
+}
+
+static struct ufs_mtk_phy *get_ufs_mtk_phy(struct phy *generic_phy)
+{
+ return (struct ufs_mtk_phy *)phy_get_drvdata(generic_phy);
+}
+
+static int ufs_mtk_phy_clk_init(struct ufs_mtk_phy *phy)
+{
+ struct device *dev = phy->dev;
+
+ phy->unipro_clk = devm_clk_get(dev, "unipro-clk");
+ if (IS_ERR(phy->unipro_clk)) {
+ dev_err(dev, "failed to get unipro-clk");
+ return PTR_ERR(phy->unipro_clk);
+ }
+
+ phy->mp_clk = devm_clk_get(dev, "mp-clk");
+ if (IS_ERR(phy->mp_clk)) {
+ dev_err(dev, "failed to get mp-clk");
+ return PTR_ERR(phy->mp_clk);
+ }
+
+ return 0;
+}
+
+static void ufs_mtk_phy_set_active(struct ufs_mtk_phy *phy)
+{
+ /* release DA_MP_PLL_PWR_ON */
+ mphy_set_bit(phy, MP_GLB_DIG_8C, PLL_PWR_ON);
+ mphy_clr_bit(phy, MP_GLB_DIG_8C, FRC_FRC_PWR_ON);
+
+ /* release DA_MP_PLL_ISO_EN */
+ mphy_clr_bit(phy, MP_GLB_DIG_8C, PLL_ISO_EN);
+ mphy_clr_bit(phy, MP_GLB_DIG_8C, FRC_PLL_ISO_EN);
+
+ /* release DA_MP_CDR_PWR_ON */
+ mphy_set_bit(phy, MP_LN_RX_44, CDR_PWR_ON);
+ mphy_clr_bit(phy, MP_LN_RX_44, FRC_CDR_PWR_ON);
+
+ /* release DA_MP_CDR_ISO_EN */
+ mphy_clr_bit(phy, MP_LN_RX_44, CDR_ISO_EN);
+ mphy_clr_bit(phy, MP_LN_RX_44, FRC_CDR_ISO_EN);
+
+ /* release DA_MP_RX0_SQ_EN */
+ mphy_set_bit(phy, MP_LN_DIG_RX_AC, RX_SQ_EN);
+ mphy_clr_bit(phy, MP_LN_DIG_RX_AC, FRC_RX_SQ_EN);
+
+ /* delay 1us to wait DIFZ stable */
+ udelay(1);
+
+ /* release DIFZ */
+ mphy_clr_bit(phy, MP_LN_DIG_RX_9C, FSM_DIFZ_FRC);
+}
+
+static void ufs_mtk_phy_set_deep_hibern(struct ufs_mtk_phy *phy)
+{
+ /* force DIFZ */
+ mphy_set_bit(phy, MP_LN_DIG_RX_9C, FSM_DIFZ_FRC);
+
+ /* force DA_MP_RX0_SQ_EN */
+ mphy_set_bit(phy, MP_LN_DIG_RX_AC, FRC_RX_SQ_EN);
+ mphy_clr_bit(phy, MP_LN_DIG_RX_AC, RX_SQ_EN);
+
+ /* force DA_MP_CDR_ISO_EN */
+ mphy_set_bit(phy, MP_LN_RX_44, FRC_CDR_ISO_EN);
+ mphy_set_bit(phy, MP_LN_RX_44, CDR_ISO_EN);
+
+ /* force DA_MP_CDR_PWR_ON */
+ mphy_set_bit(phy, MP_LN_RX_44, FRC_CDR_PWR_ON);
+ mphy_clr_bit(phy, MP_LN_RX_44, CDR_PWR_ON);
+
+ /* force DA_MP_PLL_ISO_EN */
+ mphy_set_bit(phy, MP_GLB_DIG_8C, FRC_PLL_ISO_EN);
+ mphy_set_bit(phy, MP_GLB_DIG_8C, PLL_ISO_EN);
+
+ /* force DA_MP_PLL_PWR_ON */
+ mphy_set_bit(phy, MP_GLB_DIG_8C, FRC_FRC_PWR_ON);
+ mphy_clr_bit(phy, MP_GLB_DIG_8C, PLL_PWR_ON);
+}
+
+static int ufs_mtk_phy_power_on(struct phy *generic_phy)
+{
+ struct ufs_mtk_phy *phy = get_ufs_mtk_phy(generic_phy);
+ int ret;
+
+ ret = clk_prepare_enable(phy->unipro_clk);
+ if (ret) {
+ dev_err(phy->dev, "unipro_clk enable failed %d\n", ret);
+ goto out;
+ }
+
+ ret = clk_prepare_enable(phy->mp_clk);
+ if (ret) {
+ dev_err(phy->dev, "mp_clk enable failed %d\n", ret);
+ goto out_unprepare_unipro_clk;
+ }
+
+ ufs_mtk_phy_set_active(phy);
+
+ return 0;
+
+out_unprepare_unipro_clk:
+ clk_disable_unprepare(phy->unipro_clk);
+out:
+ return ret;
+}
+
+static int ufs_mtk_phy_power_off(struct phy *generic_phy)
+{
+ struct ufs_mtk_phy *phy = get_ufs_mtk_phy(generic_phy);
+
+ ufs_mtk_phy_set_deep_hibern(phy);
+
+ clk_disable_unprepare(phy->unipro_clk);
+ clk_disable_unprepare(phy->mp_clk);
+
+ return 0;
+}
+
+static const struct phy_ops ufs_mtk_phy_ops = {
+ .power_on = ufs_mtk_phy_power_on,
+ .power_off = ufs_mtk_phy_power_off,
+ .owner = THIS_MODULE,
+};
+
+static int ufs_mtk_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct phy *generic_phy;
+ struct phy_provider *phy_provider;
+ struct resource *res;
+ struct ufs_mtk_phy *phy;
+ int ret;
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ phy->mmio = devm_ioremap_resource(dev, res);
+ if (IS_ERR(phy->mmio))
+ return PTR_ERR(phy->mmio);
+
+ phy->dev = dev;
+
+ ret = ufs_mtk_phy_clk_init(phy);
+ if (ret)
+ return ret;
+
+ generic_phy = devm_phy_create(dev, NULL, &ufs_mtk_phy_ops);
+ if (IS_ERR(generic_phy))
+ return PTR_ERR(generic_phy);
+
+ phy_set_drvdata(generic_phy, phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+
+ return PTR_ERR_OR_ZERO(phy_provider);
+}
+
+static const struct of_device_id ufs_mtk_phy_of_match[] = {
+ {.compatible = "mediatek,ufs-mphy"},
+ {},
+};
+MODULE_DEVICE_TABLE(of, ufs_mtk_phy_of_match);
+
+static struct platform_driver ufs_mtk_phy_driver = {
+ .probe = ufs_mtk_phy_probe,
+ .driver = {
+ .of_match_table = ufs_mtk_phy_of_match,
+ .name = "ufs_mtk_phy",
+ },
+};
+module_platform_driver(ufs_mtk_phy_driver);
+
+MODULE_DESCRIPTION("Universal Flash Storage (UFS) MediaTek MPHY");
+MODULE_AUTHOR("Stanley Chu <stanley.chu-c+3QU6Y0cdFWk0Htik3J/w@public.gmane.org>");
+MODULE_LICENSE("GPL v2");
+
--
2.18.0
next prev parent reply other threads:[~2019-02-27 7:23 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-27 7:23 scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips Stanley Chu
[not found] ` <1551252192-535-1-git-send-email-stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-02-27 7:23 ` [PATCH v3 0/7] " Stanley Chu
[not found] ` <1551252192-535-2-git-send-email-stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-03-06 1:32 ` Stanley Chu
2019-02-27 7:23 ` [PATCH v3 1/7] scsi: ufs: Introduce ufshcd_get_pwr_dev_param Stanley Chu
2019-02-27 7:23 ` [PATCH v3 2/7] scsi: ufs-qcom: Re-factor ufshcd_get_pwr_dev_param Stanley Chu
2019-02-27 7:23 ` [PATCH v3 3/7] scsi: ufs-hisi: " Stanley Chu
2019-02-27 7:23 ` [PATCH v3 4/7] dt-bindings: phy: Add document for phy-mtk-ufs Stanley Chu
[not found] ` <1551252192-535-6-git-send-email-stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-03-12 13:25 ` Rob Herring
2019-03-13 2:42 ` Stanley Chu
2019-03-13 10:27 ` Stanley Chu
2019-03-13 10:21 ` [SPAM][PATCH " Yingjoe Chen
2019-03-13 14:05 ` Stanley Chu
2019-03-13 19:52 ` Rob Herring
[not found] ` <CAL_JsqKohcSXw5BcqpQ2eVHf36kVoPdVe+rxJ+6XvdqM4nQ0Wg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-03-14 3:42 ` [PATCH " Stanley Chu
2019-02-27 7:23 ` [PATCH v3 5/7] dt-bindings: scsi: ufs: Add document for ufs-mediatek Stanley Chu
[not found] ` <1551252192-535-7-git-send-email-stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-03-12 13:31 ` Rob Herring
2019-03-13 2:41 ` Stanley Chu
2019-03-13 19:48 ` Rob Herring
[not found] ` <CAL_JsqJ8EkM5EsQCCsyY0M1SuDar2qQi6QjA=91+Svv79-8rAg-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2019-03-14 3:45 ` Stanley Chu
2019-03-14 8:46 ` Marc Gonzalez
2019-03-14 16:44 ` Rob Herring
2019-03-15 4:04 ` Stanley Chu
2019-03-14 8:54 ` Marc Gonzalez
2019-02-27 7:23 ` Stanley Chu [this message]
[not found] ` <1551252192-535-8-git-send-email-stanley.chu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org>
2019-03-01 7:13 ` [PATCH v3 6/7] phy: mediatek: Add UFS M-PHY driver Chunfeng Yun
2019-03-13 9:37 ` Yingjoe Chen
2019-03-13 10:17 ` Stanley Chu
2019-02-27 7:23 ` [PATCH v3 7/7] scsi: ufs-mediatek: Add UFS support for Mediatek SoC chips Stanley Chu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551252192-535-8-git-send-email-stanley.chu@mediatek.com \
--to=stanley.chu-nus5lvnupcjwk0htik3j/w@public.gmane.org \
--cc=alim.akhtar-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
--cc=avri.altman-Sjgp3cTcYWE@public.gmane.org \
--cc=chun-hung.wu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=chunfeng.yun-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=kishon-l0cyMroinI0@public.gmane.org \
--cc=kuohong.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=linux-scsi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=liwei213-hv44wF8Li93QT0dZR+AlfA@public.gmane.org \
--cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
--cc=martin.petersen-QHcLZuEGTsvQT0dZR+AlfA@public.gmane.org \
--cc=matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
--cc=pedrom.sousa-HKixBCOQz3hWk0Htik3J/w@public.gmane.org \
--cc=peter.wang-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org \
--cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
--cc=subhashj-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
--cc=vivek.gautam-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.