From: Brad Love <brad@nextdimension.cc>
To: linux-media@vger.kernel.org
Cc: Brad Love <brad@nextdimension.cc>
Subject: [PATCH v2 00/13] si2157: Analog tuning and optimizations
Date: Wed, 27 Feb 2019 12:27:34 -0600 [thread overview]
Message-ID: <1551292066-29574-1-git-send-email-brad@nextdimension.cc> (raw)
In-Reply-To: <1546105882-15693-1-git-send-email-brad@nextdimension.cc>
This series mainly enables analog tuning in the si2157
driver. Some various optimizations are included as well,
along with the dots connected to allow devices with
TUNER_ABSENT to utilize an analog frontend on two different
bridges. Finally two missing statistics are added to get
signal strength and CNR on a tuner and demod respectively.
Summary:
- Enable tuner status flags
- Check tuner status flags
- String cleanup and register labeling
- The analog tuning functions in si2157
- A function to wait for set_*params to complete
- Enable analog fe on TUNER_ABSENT devices in cx231xx and cx23885
- Include some signal strength DVBv5 stats
Now the two patches that 'Add i2c device analog tuner support'
I would like comment on. It looks quite ugly to have big case
statements identifying the TUNER_ABSENT models that have analog.
There is nothing unique done in the blocks, mostly. Right now
there is only a few models, but the addition of more would become
a bit excessive.
Instead of the case statement should a board profile field be
added to the two affected drivers? Something like .has_i2c_analog_fe ?
Changes since v1:
- One unnecessary patch removed
- __func__ removed from dev_XXX macros
- normalization logic simplified and explained in rf strength calculation
Brad Love (13):
si2157: Enable tuner status flags
si2157: Check error status bit on cmd execute
si2157: Better check for running tuner in init
si2157: Add clock and pin setup for si2141
cx25840: Register labeling, chip specific correction
si2157: Add analog tuning related functions
si2157: Briefly wait for tuning operation to complete
cx23885: Add analog tuner support to Hauppauge QuadHD
cx23885: Add analog tuner to 1265_K4
cx23885: Add i2c device analog tuner support
cx231xx: Add i2c device analog tuner support
si2157: add on-demand rf strength func
lgdt3306a: Add CNR v5 stat
drivers/media/dvb-frontends/lgdt3306a.c | 14 +
drivers/media/i2c/cx25840/cx25840-core.c | 33 ++-
drivers/media/pci/cx23885/cx23885-cards.c | 39 ++-
drivers/media/pci/cx23885/cx23885-dvb.c | 25 ++
drivers/media/pci/cx23885/cx23885-video.c | 68 ++++-
drivers/media/tuners/si2157.c | 436 ++++++++++++++++++++++++++++-
drivers/media/tuners/si2157_priv.h | 2 +
drivers/media/usb/cx231xx/cx231xx-avcore.c | 35 ++-
drivers/media/usb/cx231xx/cx231xx-video.c | 57 +++-
9 files changed, 651 insertions(+), 58 deletions(-)
--
2.7.4
next prev parent reply other threads:[~2019-02-27 18:36 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-12-29 17:51 [PATCH 00/13] si2157: Analog tuning and optimizations Brad Love
2018-12-29 17:51 ` [PATCH 01/13] si2157: Enable tuner status flags Brad Love
2018-12-29 17:51 ` [PATCH 02/13] si2157: Check error status bit on cmd execute Brad Love
2019-01-09 18:01 ` Antti Palosaari
2019-01-15 17:28 ` Brad Love
2018-12-29 17:51 ` [PATCH 03/13] si2157: Better check for running tuner in init Brad Love
2018-12-29 17:51 ` [PATCH 04/13] si2157: Add clock and pin setup for si2141 Brad Love
2019-01-20 17:17 ` Antti Palosaari
2019-01-22 17:10 ` Brad Love
2018-12-29 17:51 ` [PATCH 05/13] cx25840: Register labeling, chip specific correction Brad Love
2018-12-29 17:51 ` [PATCH 06/13] si2157: Add analog tuning related functions Brad Love
2018-12-29 17:51 ` [PATCH 07/13] si2157: Briefly wait for tuning operation to complete Brad Love
2019-04-05 10:29 ` Sean Young
2019-04-08 18:14 ` Brad Love
2019-04-08 20:55 ` Sean Young
2019-04-08 21:37 ` Brad Love
2019-04-10 14:48 ` Brad Love
2018-12-29 17:51 ` [PATCH 08/13] cx23885: Add analog tuner support to Hauppauge QuadHD Brad Love
2018-12-29 17:51 ` [PATCH 09/13] cx23885: Add analog tuner to 1265_K4 Brad Love
2018-12-29 17:51 ` [PATCH 11/13] cx23885: Add i2c device analog tuner support Brad Love
2018-12-29 17:51 ` [PATCH 10/13] cx231xx: " Brad Love
2018-12-29 17:51 ` [PATCH 12/13] si2157: add on-demand rf strength func Brad Love
2019-01-20 19:09 ` Antti Palosaari
2018-12-29 17:51 ` [PATCH 13/13] lgdt3306a: Add CNR v5 stat Brad Love
2019-02-27 18:27 ` Brad Love [this message]
2019-02-27 18:27 ` [PATCH v2 01/12] si2157: Enable tuner status flags Brad Love
2019-02-27 18:27 ` [PATCH v2 02/12] si2157: Check error status bit on cmd execute Brad Love
2019-02-27 18:27 ` [PATCH v2 03/12] si2157: Better check for running tuner in init Brad Love
2019-02-27 18:27 ` [PATCH v2 04/12] cx25840: Register labeling, chip specific correction Brad Love
2019-02-27 18:27 ` [PATCH v2 05/12] si2157: Add analog tuning related functions Brad Love
2019-04-05 13:24 ` Sean Young
2019-04-08 18:18 ` Brad Love
2019-02-27 18:27 ` [PATCH v2 06/12] si2157: Briefly wait for tuning operation to complete Brad Love
2019-02-27 18:27 ` [PATCH v2 07/12] cx23885: Add analog tuner support to Hauppauge QuadHD Brad Love
2019-02-27 18:27 ` [PATCH v2 08/12] cx23885: Add analog frontend to 1265_K4 Brad Love
2019-02-27 18:27 ` [PATCH v2 09/12] cx23885: Add i2c device analog tuner support Brad Love
2019-02-27 18:27 ` [PATCH v2 10/12] cx231xx: " Brad Love
2019-02-27 18:27 ` [PATCH v2 11/12] si2157: add on-demand rf strength func Brad Love
2019-02-27 18:27 ` [PATCH v2 12/12] lgdt3306a: Add CNR v5 stat Brad Love
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1551292066-29574-1-git-send-email-brad@nextdimension.cc \
--to=brad@nextdimension.cc \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.