From mboxrd@z Thu Jan 1 00:00:00 1970 From: Juergen Bausa Date: Sun, 02 Sep 2007 12:57:32 +0000 Subject: Re: [lm-sensors] dme1737 module Message-Id: <1557257505@web.de> List-Id: References: <191fb4ca0708220911q4affac9flb4bca592c3ba3850@mail.gmail.com> In-Reply-To: <191fb4ca0708220911q4affac9flb4bca592c3ba3850@mail.gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable To: lm-sensors@vger.kernel.org > -----Urspr=FCngliche Nachricht----- > Von: "Juerg Haefliger" > Gesendet: 28.08.07 17:07:38 > An: "Juergen Bausa" > CC: "Kushal Koolwal" , lm-sensors@lm-sensors.o= rg > Betreff: Re: [lm-sensors] dme1737 module >=20 >=20 > > So, which version is needed to run the dme1737 on the asus board (Which= I think doesnt have the > > SCH3114 Super I/O chip)? > > > > debian testing and unstable both have 2.10.4 at the moment, which is th= e same version as > > http://www.lm-sensors.org/wiki/Download. Will it be enough to install t= his version? >=20 > 2.10.4 and kernel 2.6.23 is sufficient if you don't have the sch311x. >=20 Now it works with lm-sensors 2.10.4 which can easily backported drom debian= testing. However, I get strange temperatures for the cpu. With the fan at 3000 rpm a= nd idle cpu I get a temperature of 17 =B0C, while room temperature is 20=B0C. I think this is not possible.= =20 I now use fancontrol which turns fan speed to 0 rpm. Here is the output of = sensors: dme1737-i2c-0-2e Adapter: SMBus nForce2 adapter at 4c00 V5stby: +0.00 V (min =3D +0.00 V, max =3D +6.64 V) ALARM Vccp: +1.10 V (min =3D +0.00 V, max =3D +2.99 V) V3.3: +3.28 V (min =3D +0.00 V, max =3D +4.38 V) V5: +4.94 V (min =3D +0.00 V, max =3D +6.64 V) V12: +11.80 V (min =3D +0.00 V, max =3D +15.94 V) V3.3stby: +3.29 V (min =3D +0.00 V, max =3D +4.38 V) Vbat: +2.98 V (min =3D +0.00 V, max =3D +4.38 V) Int Temp: +34=B0C (low =3D -127=B0C, high =3D +127=B0C) CPU Temp: +29=B0C (low =3D -127=B0C, high =3D +127=B0C) CPU_Fan: 0 RPM (min =3D 0 RPM) ERROR: Can't get fan3 data! ERROR: Can't get fan5 data! ERROR: Can't get fan6 data! CPU_PWM: 0 (enable =3D 1, freq =3D 25000 Hz) ERROR: Can't get pwm5 data! ERROR: Can't get pwm6 data! cpu0_vid: +1.550 V (VRM Version 2.4) I think 29 =B0C is also very low for idle and no fan, even for my AMD BE-23= 50=20 (45 w maximum power consumption). Also, Int-Temperature (is this board temp= erature?) is higher than cpu- temperature. This changes only for high load, where cpu-temperature increases more than int-temperature. At first I thought that temperature calculation is wrong in lm-sensors. How= ever, BIOS shows nearly the same temperatures. So, is there anything wrong here? Juergen _________________________________________________________________________ In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten!=20 Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114 _______________________________________________ lm-sensors mailing list lm-sensors@lm-sensors.org http://lists.lm-sensors.org/mailman/listinfo/lm-sensors