From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <15573283.1178627888504.JavaMail.ngmail@domain.hid> Date: Tue, 8 May 2007 14:38:08 +0200 (CEST) From: "M. Koehrer" In-Reply-To: <1178627340.5045.3.camel@domain.hid> MIME-Version: 1.0 Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: quoted-printable References: <1178627340.5045.3.camel@domain.hid> <1178385693.2406.7.camel@domain.hid> <463AE7D3.6030401@domain.hid> <24394502.1178264721982.JavaMail.ngmail@domain.hid> <13626574.1178266851510.JavaMail.ngmail@domain.hid> <1178281223.29093.83.camel@domain.hid> <23990358.1178625225906.JavaMail.ngmail@domain.hid> Subject: Re: [Xenomai-help] Xenomai and MSI enabled crashes kernel List-Id: Help regarding installation and common use of Xenomai List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , To: rpm@xenomai.org, mathias_koehrer@domain.hid Cc: xenomai@xenomai.org, jan.kiszka@domain.hid Hi Philippe, perhaps one more information regarding that issue:=20 When I disable SMP, it seems to work fine (APIC and local APIC are enabled)= . Regards Mathias > > as mentioned in my previous mail, the new patch works fine. However, I = get > the error > > APIC error on CPU0: 00(20) > > APIC error on CPU1: 00(40) > > when unloading (rmmod) xeno_native. > > I have looked closed to that issue and I have found out that this happe= ns > > within the inline function xnarch_notify_halt() (file pod.h) > >=20 > > for(cpu=3D0; cpu < nr_cpus-1; ++cpu) > > down(&xnarch_finalize_sync); > >=20 >=20 > It's likely happening a few lines earlier, when sending IPI2 to > synchronize all CPUs during Xenomai shutdown. Ok, I will have a look > asap. >=20 --=20 Mathias Koehrer mathias_koehrer@domain.hid Viel oder wenig? Schnell oder langsam? Unbegrenzt surfen + telefonieren ohne Zeit- und Volumenbegrenzung? DAS TOP ANGEBOT JETZT bei Arcor: g=FCnsti= g und schnell mit DSL - das All-Inclusive-Paket f=FCr clevere Doppel-Sparer, nur 39,85 =80 inkl. DSL- und ISDN-Grundgeb=FChr! http://www.arcor.de/rd/emf-dsl-2