From: Aniket Masule <amasule@codeaurora.org>
To: linux-media@vger.kernel.org, stanimir.varbanov@linaro.org
Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
vgarodia@codeaurora.org, Aniket Masule <amasule@codeaurora.org>
Subject: [PATCH 3/5] media: venus: Update clock scaling
Date: Thu, 30 May 2019 19:28:26 +0530 [thread overview]
Message-ID: <1559224708-6039-4-git-send-email-amasule@codeaurora.org> (raw)
In-Reply-To: <1559224708-6039-1-git-send-email-amasule@codeaurora.org>
Current clock scaling calculations are same for vpu4 and
previous versions. For vpu4, Clock scaling calculations
are updated with cycles/mb. This helps in getting precise
clock required.
Signed-off-by: Aniket Masule <amasule@codeaurora.org>
---
drivers/media/platform/qcom/venus/helpers.c | 91 +++++++++++++++++++++++++++--
1 file changed, 87 insertions(+), 4 deletions(-)
diff --git a/drivers/media/platform/qcom/venus/helpers.c b/drivers/media/platform/qcom/venus/helpers.c
index f7f724b..f2470af 100644
--- a/drivers/media/platform/qcom/venus/helpers.c
+++ b/drivers/media/platform/qcom/venus/helpers.c
@@ -348,8 +348,9 @@ static u32 load_per_type(struct venus_core *core, u32 session_type)
return mbs_per_sec;
}
-static int load_scale_clocks(struct venus_core *core)
+static int scale_clocks(struct venus_inst *inst)
{
+ struct venus_core *core = inst->core;
const struct freq_tbl *table = core->res->freq_tbl;
unsigned int num_rows = core->res->freq_tbl_size;
unsigned long freq = table[0].freq;
@@ -398,6 +399,89 @@ static int load_scale_clocks(struct venus_core *core)
return ret;
}
+static unsigned long calculate_inst_freq(struct venus_inst *inst,
+ u32 filled_len)
+{
+ unsigned long vpp_cycles = 0;
+ u32 mbs_per_sec;
+
+ mbs_per_sec = load_per_instance(inst);
+ vpp_cycles = mbs_per_sec * inst->clk_data.codec_data->vpp_cycles;
+ /* 21 / 20 is overhead factor */
+ vpp_cycles += vpp_cycles / 20;
+
+ return vpp_cycles;
+}
+
+static int scale_clocks_vpu4(struct venus_inst *inst)
+{
+ struct venus_core *core = inst->core;
+ const struct freq_tbl *table = core->res->freq_tbl;
+ unsigned int num_rows = core->res->freq_tbl_size;
+
+ struct clk *clk = core->clks[0];
+ struct device *dev = core->dev;
+
+ unsigned int i;
+ u32 filled_len = 0;
+ unsigned long freq = 0, freq_core0 = 0, freq_core1 = 0;
+ int ret;
+
+ freq = calculate_inst_freq(inst, filled_len);
+
+ if (freq > table[0].freq)
+ goto err;
+
+ for (i = 0; i < num_rows; i++) {
+ if (freq > table[i].freq)
+ break;
+ freq = table[i].freq;
+ }
+
+ inst->clk_data.freq = freq;
+
+ mutex_lock(&core->lock);
+ list_for_each_entry(inst, &core->instances, list) {
+ if (inst->clk_data.core_id == VIDC_CORE_ID_1) {
+ freq_core0 += inst->clk_data.freq;
+ } else if (inst->clk_data.core_id == VIDC_CORE_ID_2) {
+ freq_core1 += inst->clk_data.freq;
+ } else if (inst->clk_data.core_id == VIDC_CORE_ID_3) {
+ freq_core0 += inst->clk_data.freq;
+ freq_core1 += inst->clk_data.freq;
+ }
+ }
+ mutex_unlock(&core->lock);
+
+ freq = max(freq_core0, freq_core1);
+
+ ret = clk_set_rate(clk, freq);
+ if (ret)
+ goto err;
+
+ ret = clk_set_rate(core->core0_clk, freq);
+ if (ret)
+ goto err;
+
+ ret = clk_set_rate(core->core1_clk, freq);
+ if (ret)
+ goto err;
+
+ return 0;
+
+err:
+ dev_err(dev, "failed to set clock rate %lu (%d)\n", freq, ret);
+ return ret;
+}
+
+static int load_scale_clocks(struct venus_inst *inst)
+{
+ if (IS_V3(inst->core) || IS_V1(inst->core))
+ return scale_clocks(inst);
+ else
+ return scale_clocks_vpu4(inst);
+}
+
static void fill_buffer_desc(const struct venus_buffer *buf,
struct hfi_buffer_desc *bd, bool response)
{
@@ -1053,7 +1137,7 @@ void venus_helper_vb2_stop_streaming(struct vb2_queue *q)
venus_helper_free_dpb_bufs(inst);
- load_scale_clocks(core);
+ load_scale_clocks(inst);
INIT_LIST_HEAD(&inst->registeredbufs);
}
@@ -1070,7 +1154,6 @@ void venus_helper_vb2_stop_streaming(struct vb2_queue *q)
int venus_helper_vb2_start_streaming(struct venus_inst *inst)
{
- struct venus_core *core = inst->core;
int ret;
ret = intbufs_alloc(inst);
@@ -1081,7 +1164,7 @@ int venus_helper_vb2_start_streaming(struct venus_inst *inst)
if (ret)
goto err_bufs_free;
- load_scale_clocks(core);
+ load_scale_clocks(inst);
ret = hfi_session_load_res(inst);
if (ret)
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2019-05-30 13:59 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-05-30 13:58 [PATCH 0/5] media: venus: Update clock scaling and core selection Aniket Masule
2019-05-30 13:58 ` [PATCH 1/5] media: venus: Add codec data table Aniket Masule
2019-05-30 13:58 ` [PATCH 2/5] media: venus: Initialize codec data Aniket Masule
2019-05-30 13:58 ` Aniket Masule [this message]
2019-05-30 13:58 ` [PATCH 4/5] media: venus: Add interface for load per core Aniket Masule
2019-05-30 13:58 ` [PATCH 5/5] media: venus: Update core selection Aniket Masule
-- strict thread matches above, loose matches on Subject: below --
2019-06-11 6:05 [PATCH v2 0/5] media: venus: Update clock scaling and " Aniket Masule
2019-06-11 6:05 ` [PATCH 3/5] media: venus: Update clock scaling Aniket Masule
2019-06-17 8:58 ` Stanimir Varbanov
2019-06-20 8:28 ` amasule
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1559224708-6039-4-git-send-email-amasule@codeaurora.org \
--to=amasule@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=stanimir.varbanov@linaro.org \
--cc=vgarodia@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.