All of lore.kernel.org
 help / color / mirror / Atom feed
From: Patrick Daume <patrick.daume@dedrone.com>
To: "kvalo@codeaurora.org" <kvalo@codeaurora.org>
Cc: "ath10k@lists.infradead.org" <ath10k@lists.infradead.org>
Subject: Re: Qualcomm Atheros QCA6174 monitoring mode receiving no data
Date: Thu, 13 Jun 2019 08:54:10 +0000	[thread overview]
Message-ID: <1560416049.23005.9.camel@dedrone.com> (raw)
In-Reply-To: <1559749116.10289.19.camel@dedrone.com>

On Mi, 2019-06-05 at 17:38 +0200, Patrick Daume wrote:
> I test it with modprobe option rawmode=1 and it seems to work.
> 
> solution:
> 
> linux kernel 5.1.0-rc7-wt-ath+
> firmware: WLAN.RM.4.4.1.c3-00030
> 
> sudo modprobe ath10k_core rawmode=1
> sudo modprobe ath10k_pci
> 
> 
> But if i call tcpdump for a while i got some error traces in dmesg.
> How
> can i fix this?
> 
> [  281.101682]  pinctrl_intel [last unloaded: cfg80211]
> [  281.101694] CPU: 1 PID: 0 Comm: swapper/1 Tainted:
> G        W         5.1.0-rc7-wt-ath+ #3
> [  281.101697] Hardware name:  /, BIOS 5.11 03/24/2016
> [  281.101703] RIP: 0010:skb_trim+0x2d/0x30
> [  281.101708] Code: 00 00 39 77 70 77 02 f3 c3 8b 47 74 85 c0 75 1a
> 48 8b 87 c8 00 00 00 48 2b 87 c0 00 00 00 89 77 70 01 c6 89 b7 b8 00
> 00 00 c3 <0f> 0b c3 0f 1f 44 00 00 8b 87 e8 00 00 00 8b 96 d0 00 00
> 00 01 d0
> [  281.101712] RSP: 0018:ffff9d47dda83ce0 EFLAGS: 00010206
> [  281.101717] RAX: 00000000000004cc RBX: 0000000000008000 RCX:
> ffff9d47dda83e60
> [  281.101720] RDX: 0000000000000000 RSI: 0000000000000ae0 RDI:
> ffff9d47d3eebf00
> [  281.101723] RBP: 0000000000000004 R08: 0000000000000000 R09:
> 0000000000000000
> [  281.101726] R10: fffff2c05158d840 R11: ffff9d43b447e4b8 R12:
> 0000000000000000
> [  281.101729] R13: 0000000000004000 R14: ffff9d47d0421620 R15:
> ffff9d47d3eebf00
> [  281.101734] FS:  0000000000000000(0000) GS:ffff9d47dda80000(0000)
> knlGS:0000000000000000
> [  281.101737] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> [  281.101741] CR2: 000056110f0580a4 CR3: 00000003a120e003 CR4:
> 00000000003606e0
> [  281.101744] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> 0000000000000000
> [  281.101747] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7:
> 0000000000000400
> [  281.101749] Call Trace:
> [  281.101755]  <IRQ>
> [  281.101798]  ath10k_htt_rx_h_mpdu+0x6a5/0xab0 [ath10k_core]
> [  281.101813]  ? swiotlb_map+0x6b/0x1c0
> [  281.101846]  ath10k_htt_txrx_compl_task+0xc4f/0x1490 [ath10k_core]
> [  281.101864]  ath10k_pci_napi_poll+0x51/0x130 [ath10k_pci]
> [  281.101876]  net_rx_action+0x27e/0x3d0
> [  281.101888]  __do_softirq+0xfd/0x2d8
> [  281.101899]  irq_exit+0xae/0xb0
> [  281.101906]  do_IRQ+0x52/0xe0
> [  281.101913]  common_interrupt+0xf/0xf
> [  281.101917]  </IRQ>
> [  281.101928] RIP: 0010:cpuidle_enter_state+0xc4/0x460
> [  281.101932] Code: e8 71 f7 90 ff 80 7c 24 0f 00 74 17 9c 58 0f 1f
> 44 00 00 f6 c4 02 0f 85 65 03 00 00 31 ff e8 b3 f6 96 ff fb 66 0f 1f
> 44 00 00 <45> 85 e4 0f 88 35 03 00 00 4c 2b 7c 24 10 48 ba cf f7 53
> e3 a5 9b
> [  281.101936] RSP: 0018:ffffacef41943e88 EFLAGS: 00000246 ORIG_RAX:
> ffffffffffffffdd
> [  281.101941] RAX: ffff9d47ddaa2c80 RBX: ffffffffad2d7860 RCX:
> 000000000000001f
> [  281.101944] RDX: 0000000000000000 RSI: 000000002d958403 RDI:
> 0000000000000000
> [  281.101947] RBP: ffff9d47ddaac100 R08: fffffffca8f126a7 R09:
> ffff9d47ddaa1ca4
> [  281.101950] R10: 0000000000000018 R11: 0000000000002615 R12:
> 0000000000000008
> [  281.101953] R13: 0000000000000008 R14: ffffffffad2d7860 R15:
> 0000004172f2f453
> [  281.101965]  ? cpuidle_enter_state+0x9f/0x460
> [  281.101972]  do_idle+0x202/0x280
> [  281.101980]  cpu_startup_entry+0x19/0x20
> [  281.101990]  start_secondary+0x17a/0x1d0
> [  281.101999]  secondary_startup_64+0xa4/0xb0
> [  281.102006] ---[ end trace 23dc6ddb093396c5 ]---
> [  306.126454] device wlp2s0 entered promiscuous mode
> [  317.700835] device wlp2s0 left promiscuous mode








htt.h:2226

/*
 * Should be: sizeof(struct htt_host_rx_desc) + max rx MSDU size,
>> * sizeof(struct htt_host_rx_desc) 360 bytes + max MPDU/~MDSU size
802.11AC 16.384 bytes (2^14) + (2^9)
 * rounded up to a cache line size.
 */
>> #define HTT_RX_BUF_SIZE 16896
#define HTT_RX_MSDU_SIZE (HTT_RX_BUF_SIZE - (int)sizeof(struct
htt_rx_desc))





htt_rx.c:1390, ath10k_htt_rx_h_undecap_raw

if (WARN_ON_ONCE(!(is_first && is_last) && !msdu_limit_err))
	return;

/* We see zero length msdus and greater max lenght msdus,
 * not sure why. At least don't try to trim it further.
 */
>> if (unlikely(msdu->len < FCS_LEN || msdu->len > HTT_RX_MSDU_SIZE))
>>	return;

skb_trim(msdu, msdu->len - FCS_LEN);


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  reply	other threads:[~2019-06-13  8:54 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-05-31  9:57 Qualcomm Atheros QCA6174 monitoring mode receiving no data Patrick Daume
2019-06-03  9:25 ` Kalle Valo
2019-06-03 12:50   ` Patrick Daume
2019-06-05  5:09     ` Kalle Valo
2019-06-05  7:18       ` Patrick Daume
2019-06-05 15:38       ` Patrick Daume
2019-06-13  8:54         ` Patrick Daume [this message]
2019-06-13  9:03           ` Patrick Daume

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1560416049.23005.9.camel@dedrone.com \
    --to=patrick.daume@dedrone.com \
    --cc=ath10k@lists.infradead.org \
    --cc=kvalo@codeaurora.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.