[GIT PULL FOR renesas-drivers] D3 and E3 HDMI output support

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Geert,

The following changes since commit 6e1637c91742570ff873433ed27227933b792af4:

  drm: rcar-du: Remove packed VYUY support (2018-09-15 17:28:34 +0300)

are available in the Git repository at:

  git://linuxtv.org/pinchartl/media.git for/renesas-drivers

for you to fetch changes up to d7e0cb47e1d06d3033812281fe98528d1713ec16:

  Merge tag 'drm-du-dt-lvds-pll-v1-20180915' into for/renesas-drivers 
(2018-09-15 17:38:05 +0300)

Please note that the for/renesas-drivers branch is a merge of a code and a DT 
branch (available under the drm-du-lvds-pll-v1-20180915 and drm-du-dt-lvds-
pll-v1-20180915 tags respectively). Those two branches have different bases 
(drm-next from Dave's tree and devel from Simon's tree respectively), I've 
thus edited the diffstat below manually.

----------------------------------------------------------------
Kieran Bingham (1):
      arm64: dts: renesas: r8a77995: Add LVDS support

Laurent Pinchart (14):
      arm64: dts: renesas: r8a77990: Add display output support
      arm64: dts: renesas: r8a77990: ebisu: Enable VGA and HDMI outputs
      pinctrl: sh-pfc: r8a77990: Add DU pins, groups and function
      dt-bindings: display: renesas: du: Document r8a77990 bindings
      dt-bindings: display: renesas: lvds: Document r8a77990 bindings
      dt-bindings: display: renesas: lvds: Add EXTAL and DU_DOTCLKIN clocks
      drm: bridge: thc63: Restrict modes based on hardware operating frequency
      drm: rcar-du: lvds: D3/E3 support
      drm: rcar-du: Perform the initial CRTC setup from rcar_du_crtc_get()
      drm: rcar-du: Use LVDS PLL clock as dot clock when possible
      drm: rcar-du: Enable configurable DPAD0 routing on Gen3
      drm: rcar-du: Cache DSYSR value to ensure known initial value
      drm: rcar-du: Don't use TV sync mode when not supported by the hardware
      Merge tag 'drm-du-dt-lvds-pll-v1-20180915' into for/renesas-drivers

Ulrich Hecht (2):
      arm64: dts: renesas: r8a77995: draak: Enable HDMI display output
      drm: rcar-du: Add r8a77990 and r8a77995 device support

 Documentation/devicetree/bindings/display/bridge/renesas,lvds.txt |   13 
 Documentation/devicetree/bindings/display/renesas,du.txt          |    2 
 arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts                    |  166 ++++
 arch/arm64/boot/dts/renesas/r8a77990.dtsi                         |  167 ++++
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts                    |   98 ++
 arch/arm64/boot/dts/renesas/r8a77995.dtsi                         |   56 +
 drivers/gpu/drm/bridge/thc63lvd1024.c                             |   18 
 drivers/gpu/drm/rcar-du/rcar_du_crtc.c                            |  136 ++-
 drivers/gpu/drm/rcar-du/rcar_du_crtc.h                            |    5 
 drivers/gpu/drm/rcar-du/rcar_du_drv.c                             |   63 +
 drivers/gpu/drm/rcar-du/rcar_du_drv.h                             |    3 
 drivers/gpu/drm/rcar-du/rcar_du_group.c                           |   88 +-
 drivers/gpu/drm/rcar-du/rcar_du_kms.c                             |   12 
 drivers/gpu/drm/rcar-du/rcar_lvds.c                               |  355 +++-
 drivers/gpu/drm/rcar-du/rcar_lvds_regs.h                          |   43 +
 drivers/pinctrl/sh-pfc/pfc-r8a77990.c                             |  110 +++
 16 files changed, 1187 insertions(+), 148 deletions(-)

-- 
Regards,

Laurent Pinchart