All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: dkorotin@wavecomp.com, paul.burton@mips.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] MIPS: Add missing EHB in mtc0 -> mfc0 sequence." failed to apply to 4.4-stable tree
Date: Mon, 08 Jul 2019 14:41:31 +0200	[thread overview]
Message-ID: <1562589691144251@kroah.com> (raw)


The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 0b24cae4d535045f4c9e177aa228d4e97bad212c Mon Sep 17 00:00:00 2001
From: Dmitry Korotin <dkorotin@wavecomp.com>
Date: Mon, 24 Jun 2019 19:05:27 +0000
Subject: [PATCH] MIPS: Add missing EHB in mtc0 -> mfc0 sequence.

Add a missing EHB (Execution Hazard Barrier) in mtc0 -> mfc0 sequence.
Without this execution hazard barrier it's possible for the value read
back from the KScratch register to be the value from before the mtc0.

Reproducible on P5600 & P6600.

The hazard is documented in the MIPS Architecture Reference Manual Vol.
III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
6.03 table 8.1 which includes:

   Producer | Consumer | Hazard
  ----------|----------|----------------------------
   mtc0     | mfc0     | any coprocessor 0 register

Signed-off-by: Dmitry Korotin <dkorotin@wavecomp.com>
[paul.burton@mips.com:
  - Commit message tweaks.
  - Add Fixes tags.
  - Mark for stable back to v3.15 where P5600 support was introduced.]
Signed-off-by: Paul Burton <paul.burton@mips.com>
Fixes: 3d8bfdd03072 ("MIPS: Use C0_KScratch (if present) to hold PGD pointer.")
Fixes: 829dcc0a956a ("MIPS: Add MIPS P5600 probe support")
Cc: linux-mips@vger.kernel.org
Cc: stable@vger.kernel.org # v3.15+

diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c
index 65b6e85447b1..144ceb0fba88 100644
--- a/arch/mips/mm/tlbex.c
+++ b/arch/mips/mm/tlbex.c
@@ -391,6 +391,7 @@ static struct work_registers build_get_work_registers(u32 **p)
 static void build_restore_work_registers(u32 **p)
 {
 	if (scratch_reg >= 0) {
+		uasm_i_ehb(p);
 		UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
 		return;
 	}
@@ -668,10 +669,12 @@ static void build_restore_pagemask(u32 **p, struct uasm_reloc **r,
 			uasm_i_mtc0(p, 0, C0_PAGEMASK);
 			uasm_il_b(p, r, lid);
 		}
-		if (scratch_reg >= 0)
+		if (scratch_reg >= 0) {
+			uasm_i_ehb(p);
 			UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-		else
+		} else {
 			UASM_i_LW(p, 1, scratchpad_offset(0), 0);
+		}
 	} else {
 		/* Reset default page size */
 		if (PM_DEFAULT_MASK >> 16) {
@@ -938,10 +941,12 @@ build_get_pgd_vmalloc64(u32 **p, struct uasm_label **l, struct uasm_reloc **r,
 		uasm_i_jr(p, ptr);
 
 		if (mode == refill_scratch) {
-			if (scratch_reg >= 0)
+			if (scratch_reg >= 0) {
+				uasm_i_ehb(p);
 				UASM_i_MFC0(p, 1, c0_kscratch(), scratch_reg);
-			else
+			} else {
 				UASM_i_LW(p, 1, scratchpad_offset(0), 0);
+			}
 		} else {
 			uasm_i_nop(p);
 		}
@@ -1258,6 +1263,7 @@ build_fast_tlb_refill_handler (u32 **p, struct uasm_label **l,
 	UASM_i_MTC0(p, odd, C0_ENTRYLO1); /* load it */
 
 	if (c0_scratch_reg >= 0) {
+		uasm_i_ehb(p);
 		UASM_i_MFC0(p, scratch, c0_kscratch(), c0_scratch_reg);
 		build_tlb_write_entry(p, l, r, tlb_random);
 		uasm_l_leave(l, *p);
@@ -1603,15 +1609,17 @@ static void build_setup_pgd(void)
 		uasm_i_dinsm(&p, a0, 0, 29, 64 - 29);
 		uasm_l_tlbl_goaround1(&l, p);
 		UASM_i_SLL(&p, a0, a0, 11);
-		uasm_i_jr(&p, 31);
 		UASM_i_MTC0(&p, a0, C0_CONTEXT);
+		uasm_i_jr(&p, 31);
+		uasm_i_ehb(&p);
 	} else {
 		/* PGD in c0_KScratch */
-		uasm_i_jr(&p, 31);
 		if (cpu_has_ldpte)
 			UASM_i_MTC0(&p, a0, C0_PWBASE);
 		else
 			UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg);
+		uasm_i_jr(&p, 31);
+		uasm_i_ehb(&p);
 	}
 #else
 #ifdef CONFIG_SMP
@@ -1625,13 +1633,16 @@ static void build_setup_pgd(void)
 	UASM_i_LA_mostly(&p, a2, pgdc);
 	UASM_i_SW(&p, a0, uasm_rel_lo(pgdc), a2);
 #endif /* SMP */
-	uasm_i_jr(&p, 31);
 
 	/* if pgd_reg is allocated, save PGD also to scratch register */
-	if (pgd_reg != -1)
+	if (pgd_reg != -1) {
 		UASM_i_MTC0(&p, a0, c0_kscratch(), pgd_reg);
-	else
+		uasm_i_jr(&p, 31);
+		uasm_i_ehb(&p);
+	} else {
+		uasm_i_jr(&p, 31);
 		uasm_i_nop(&p);
+	}
 #endif
 	if (p >= (u32 *)tlbmiss_handler_setup_pgd_end)
 		panic("tlbmiss_handler_setup_pgd space exceeded");


                 reply	other threads:[~2019-07-08 12:41 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1562589691144251@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=dkorotin@wavecomp.com \
    --cc=paul.burton@mips.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.