[PATCH 3/3] EDAC, altera: Use common framework for Stratix10 SDRAM ECC

[thor.thayer@linux.intel.com]

From: Thor Thayer <thor.thayer@linux.intel.com>

The Stratix10 SDRAM ECC is a better match with the devices ECC
framework.
Use the ECC device framework with the linked list to track
SDRAM errors. This simplifies the device tree node as well.

Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com>
---
 drivers/edac/altera_edac.c | 32 +++++++++++++++++++++++++++++---
 drivers/edac/altera_edac.h | 25 ++++++++++++++++++++++++-
 2 files changed, 53 insertions(+), 4 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index c2e693e34d43..23e6af7287e4 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -222,7 +222,6 @@ static unsigned long get_total_mem(void)
 static const struct of_device_id altr_sdram_ctrl_of_match[] = {
 	{ .compatible = "altr,sdram-edac", .data = &c5_data},
 	{ .compatible = "altr,sdram-edac-a10", .data = &a10_data},
-	{ .compatible = "altr,sdram-edac-s10", .data = &a10_data},
 	{},
 };
 MODULE_DEVICE_TABLE(of, altr_sdram_ctrl_of_match);
@@ -1170,6 +1169,24 @@ static int __init __maybe_unused altr_init_a10_ecc_device_type(char *compat)
 	return 0;
 }
 
+/*********************** SDRAM EDAC Device Functions *********************/
+
+#ifdef CONFIG_EDAC_ALTERA_SDRAM
+
+static const struct edac_device_prv_data s10_sdramecc_data = {
+	.setup = altr_check_ecc_deps,
+	.ce_clear_mask = ALTR_S10_ECC_SERRPENA,
+	.ue_clear_mask = ALTR_S10_ECC_DERRPENA,
+	.ecc_enable_mask = ALTR_S10_ECC_EN,
+	.ecc_en_ofst = ALTR_S10_ECC_CTRL_SDRAM_OFST,
+	.ce_set_mask = ALTR_S10_ECC_TSERRA,
+	.ue_set_mask = ALTR_S10_ECC_TDERRA,
+	.set_err_ofst = ALTR_S10_ECC_INTTEST_OFST,
+	.ecc_irq_handler = altr_edac_a10_ecc_irq,
+	.inject_fops = &altr_edac_a10_device_inject_fops,
+};
+#endif /* CONFIG_EDAC_ALTERA_SDRAM */
+
 /*********************** OCRAM EDAC Device Functions *********************/
 
 #ifdef CONFIG_EDAC_ALTERA_OCRAM
@@ -1759,6 +1776,9 @@ static const struct of_device_id altr_edac_a10_device_of_match[] = {
 #ifdef CONFIG_EDAC_ALTERA_SDMMC
 	{ .compatible = "altr,socfpga-sdmmc-ecc", .data = &a10_sdmmcecca_data },
 #endif
+#ifdef CONFIG_EDAC_ALTERA_SDRAM
+	{ .compatible = "altr,sdram-edac-s10", .data = &s10_sdramecc_data },
+#endif
 	{},
 };
 MODULE_DEVICE_TABLE(of, altr_edac_a10_device_of_match);
@@ -1889,6 +1909,10 @@ static int validate_parent_available(struct device_node *np)
 	struct device_node *parent;
 	int ret = 0;
 
+	/* SDRAM must be present for Linux (implied parent) */
+	if (of_device_is_compatible(np, "altr,sdram-edac-s10"))
+		return 0;
+
 	/* Ensure parent device is enabled if parent node exists */
 	parent = of_parse_phandle(np, "altr,ecc-parent", 0);
 	if (parent && !of_device_is_available(parent))
@@ -2231,13 +2255,15 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 		    of_device_is_compatible(child, "altr,socfpga-dma-ecc") ||
 		    of_device_is_compatible(child, "altr,socfpga-usb-ecc") ||
 		    of_device_is_compatible(child, "altr,socfpga-qspi-ecc") ||
+#ifdef CONFIG_EDAC_ALTERA_SDRAM
+		    of_device_is_compatible(child, "altr,sdram-edac-s10") ||
+#endif
 		    of_device_is_compatible(child, "altr,socfpga-sdmmc-ecc"))
 
 			altr_edac_a10_device_add(edac, child);
 
 #ifdef CONFIG_EDAC_ALTERA_SDRAM
-		else if ((of_device_is_compatible(child, "altr,sdram-edac-a10")) ||
-			 (of_device_is_compatible(child, "altr,sdram-edac-s10")))
+		else if (of_device_is_compatible(child, "altr,sdram-edac-a10"))
 			of_platform_populate(pdev->dev.of_node,
 					     altr_sdram_ctrl_of_match,
 					     NULL, &pdev->dev);
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index 55654cc4bcdf..3727e72c8c2e 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -289,6 +289,29 @@ struct altr_sdram_mc_data {
 #define ALTR_A10_ECC_INIT_WATCHDOG_10US      10000
 
 /************* Stratix10 Defines **************/
+#define ALTR_S10_ECC_CTRL_SDRAM_OFST      0x00
+#define ALTR_S10_ECC_EN                   BIT(0)
+
+#define ALTR_S10_ECC_ERRINTEN_OFST        0x10
+#define ALTR_S10_ECC_ERRINTENS_OFST       0x14
+#define ALTR_S10_ECC_ERRINTENR_OFST       0x18
+#define ALTR_S10_ECC_SERRINTEN            BIT(0)
+
+#define ALTR_S10_ECC_INTMODE_OFST         0x1C
+#define ALTR_S10_ECC_INTMODE              BIT(0)
+
+#define ALTR_S10_ECC_INTSTAT_OFST         0x20
+#define ALTR_S10_ECC_SERRPENA             BIT(0)
+#define ALTR_S10_ECC_DERRPENA             BIT(8)
+#define ALTR_S10_ECC_ERRPENA_MASK         (ALTR_S10_ECC_SERRPENA | \
+					   ALTR_S10_ECC_DERRPENA)
+
+#define ALTR_S10_ECC_INTTEST_OFST         0x24
+#define ALTR_S10_ECC_TSERRA               BIT(0)
+#define ALTR_S10_ECC_TDERRA               BIT(8)
+#define ALTR_S10_ECC_TSERRB               BIT(16)
+#define ALTR_S10_ECC_TDERRB               BIT(24)
+
 #define ALTR_S10_DERR_ADDRA_OFST          0x2C
 
 /* Stratix10 ECC Manager Defines */
@@ -300,7 +323,7 @@ struct altr_sdram_mc_data {
 #define S10_SYSMGR_UE_ADDR_OFST           0x224
 
 #define S10_DDR0_IRQ_MASK                 BIT(16)
-#define S10_DBE_IRQ_MASK                  0x3FE
+#define S10_DBE_IRQ_MASK                  0x3FFFE
 
 /* Define ECC Block Offsets for peripherals */
 #define ECC_BLK_ADDRESS_OFST              0x40
-- 
2.7.4