From: Haiyue Wang <haiyue.wang@intel.com>
To: dev@dpdk.org
Cc: Haiyue Wang <haiyue.wang@intel.com>
Subject: [dpdk-dev] [RFC v2 1/3] ethdev: add the API for getting trace information
Date: Tue, 13 Aug 2019 11:06:10 +0800 [thread overview]
Message-ID: <1565665572-65495-2-git-send-email-haiyue.wang@intel.com> (raw)
In-Reply-To: <1565665572-65495-1-git-send-email-haiyue.wang@intel.com>
Enhance the PMD to support retrieving trace information like
Rx/Tx burst selection etc.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
---
lib/librte_ethdev/rte_ethdev.c | 18 ++++++++++++++++++
lib/librte_ethdev/rte_ethdev.h | 9 +++++++++
lib/librte_ethdev/rte_ethdev_core.h | 4 ++++
3 files changed, 31 insertions(+)
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 17d183e..6098fad 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -4083,6 +4083,24 @@ rte_eth_tx_queue_info_get(uint16_t port_id, uint16_t queue_id,
}
int
+rte_eth_trace_info_get(uint16_t port_id, uint16_t queue_id,
+ enum rte_eth_trace type, char *buf, int sz)
+{
+ struct rte_eth_dev *dev;
+
+ RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+
+ if (buf == NULL)
+ return -EINVAL;
+
+ dev = &rte_eth_devices[port_id];
+
+ RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->trace_info_get, -ENOTSUP);
+
+ return dev->dev_ops->trace_info_get(dev, queue_id, type, buf, sz);
+}
+
+int
rte_eth_dev_set_mc_addr_list(uint16_t port_id,
struct rte_ether_addr *mc_addr_set,
uint32_t nb_mc_addr)
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index dc6596b..9405157 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -404,6 +404,11 @@ struct rte_eth_rxmode {
uint64_t offloads;
};
+enum rte_eth_trace {
+ ETH_TRACE_RX_BURST,
+ ETH_TRACE_TX_BURST,
+};
+
/**
* VLAN types to indicate if it is for single VLAN, inner VLAN or outer VLAN.
* Note that single VLAN is treated the same as inner VLAN.
@@ -3556,6 +3561,10 @@ int rte_eth_rx_queue_info_get(uint16_t port_id, uint16_t queue_id,
int rte_eth_tx_queue_info_get(uint16_t port_id, uint16_t queue_id,
struct rte_eth_txq_info *qinfo);
+int
+rte_eth_trace_info_get(uint16_t port_id, uint16_t queue_id,
+ enum rte_eth_trace type, char *buf, int sz);
+
/**
* Retrieve device registers and register attributes (number of registers and
* register size)
diff --git a/lib/librte_ethdev/rte_ethdev_core.h b/lib/librte_ethdev/rte_ethdev_core.h
index 2922d5b..366bf5b 100644
--- a/lib/librte_ethdev/rte_ethdev_core.h
+++ b/lib/librte_ethdev/rte_ethdev_core.h
@@ -170,6 +170,9 @@ typedef void (*eth_rxq_info_get_t)(struct rte_eth_dev *dev,
typedef void (*eth_txq_info_get_t)(struct rte_eth_dev *dev,
uint16_t tx_queue_id, struct rte_eth_txq_info *qinfo);
+typedef int (*eth_trace_info_get_t)(struct rte_eth_dev *dev,
+ uint16_t queue_id, enum rte_eth_trace type, char *buf, int sz);
+
typedef int (*mtu_set_t)(struct rte_eth_dev *dev, uint16_t mtu);
/**< @internal Set MTU. */
@@ -418,6 +421,7 @@ struct eth_dev_ops {
eth_dev_infos_get_t dev_infos_get; /**< Get device info. */
eth_rxq_info_get_t rxq_info_get; /**< retrieve RX queue information. */
eth_txq_info_get_t txq_info_get; /**< retrieve TX queue information. */
+ eth_trace_info_get_t trace_info_get; /**< Get trace. */
eth_fw_version_get_t fw_version_get; /**< Get firmware version. */
eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
/**< Get packet types supported and identified by device. */
--
2.7.4
next prev parent reply other threads:[~2019-08-13 3:11 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-13 3:06 [dpdk-dev] [RFC v2 0/3] show the Rx/Tx burst description field Haiyue Wang
2019-08-13 3:06 ` Haiyue Wang [this message]
2019-08-13 3:24 ` [dpdk-dev] [RFC v2 1/3] ethdev: add the API for getting trace information Stephen Hemminger
2019-08-13 4:37 ` Wang, Haiyue
2019-08-13 9:57 ` David Marchand
2019-08-13 11:21 ` Wang, Haiyue
2019-08-13 12:51 ` Ray Kinsella
2019-09-06 14:21 ` Ferruh Yigit
2019-09-07 2:42 ` Wang, Haiyue
2019-09-09 11:23 ` Ferruh Yigit
2019-09-09 12:40 ` Bruce Richardson
2019-09-09 12:50 ` Ferruh Yigit
2019-09-09 13:17 ` Ferruh Yigit
2019-09-10 4:36 ` Wang, Haiyue
2019-09-10 8:06 ` Ferruh Yigit
2019-09-10 8:37 ` Wang, Haiyue
2019-09-10 9:14 ` Ferruh Yigit
2019-09-10 11:41 ` Wang, Haiyue
2019-09-10 15:00 ` Ferruh Yigit
2019-09-10 15:17 ` Wang, Haiyue
2019-09-10 15:33 ` Ferruh Yigit
2019-09-10 15:35 ` Wang, Haiyue
2019-09-10 14:19 ` Wang, Haiyue
2019-09-10 15:03 ` Ferruh Yigit
2019-09-10 15:18 ` Wang, Haiyue
2019-09-10 15:36 ` Ferruh Yigit
2019-09-10 15:38 ` Wang, Haiyue
2019-09-10 15:06 ` Ferruh Yigit
2019-09-10 15:21 ` Wang, Haiyue
2019-09-10 15:35 ` Ferruh Yigit
2019-09-10 15:37 ` Wang, Haiyue
2019-10-26 16:45 ` Thomas Monjalon
2019-10-27 4:10 ` Wang, Haiyue
2019-08-15 9:07 ` Ray Kinsella
2019-08-13 3:06 ` [dpdk-dev] [RFC v2 2/3] testpmd: show the Rx/Tx burst description Haiyue Wang
2019-08-13 3:06 ` [dpdk-dev] [RFC v2 3/3] net/ice: support the Rx/Tx burst description trace Haiyue Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1565665572-65495-2-git-send-email-haiyue.wang@intel.com \
--to=haiyue.wang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.