[U-Boot] [PATCH v2 1/4] clk: aspeed: Add support for SD clock

[Eddie James <eajames@linux.ibm.com>]

Add code to enable the SD clock on the ast2500 SoC.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 arch/arm/include/asm/arch-aspeed/scu_ast2500.h |  3 +++
 drivers/clk/aspeed/clk_ast2500.c               | 27 ++++++++++++++++++++++++++
 drivers/pinctrl/aspeed/pinctrl_ast2500.c       |  2 ++
 3 files changed, 32 insertions(+)

diff --git a/arch/arm/include/asm/arch-aspeed/scu_ast2500.h b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
index 4988ced..8db4901 100644
--- a/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
+++ b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
@@ -22,6 +22,8 @@
 #define SCU_MPLL_POST_MASK		(0x3f << SCU_MPLL_POST_SHIFT)
 #define SCU_PCLK_DIV_SHIFT		23
 #define SCU_PCLK_DIV_MASK		(7 << SCU_PCLK_DIV_SHIFT)
+#define SCU_SDCLK_DIV_SHIFT		12
+#define SCU_SDCLK_DIV_MASK		(7 << SCU_SDCLK_DIV_SHIFT)
 #define SCU_HPLL_DENUM_SHIFT		0
 #define SCU_HPLL_DENUM_MASK		0x1f
 #define SCU_HPLL_NUM_SHIFT		5
@@ -107,6 +109,7 @@
 
 #define SCU_CLKSTOP_MAC1		(1 << 20)
 #define SCU_CLKSTOP_MAC2		(1 << 21)
+#define SCU_CLKSTOP_SDCLK		(1 << 27)
 
 #define SCU_D2PLL_EXT1_OFF		(1 << 0)
 #define SCU_D2PLL_EXT1_BYPASS		(1 << 1)
diff --git a/drivers/clk/aspeed/clk_ast2500.c b/drivers/clk/aspeed/clk_ast2500.c
index dbee13a..9249cf9 100644
--- a/drivers/clk/aspeed/clk_ast2500.c
+++ b/drivers/clk/aspeed/clk_ast2500.c
@@ -143,6 +143,17 @@ static ulong ast2500_clk_get_rate(struct clk *clk)
 			rate = rate / apb_div;
 		}
 		break;
+	case BCLK_SDCLK:
+		{
+			ulong apb_div = 4 + 4 * ((readl(&priv->scu->clk_sel1)
+						  & SCU_SDCLK_DIV_MASK)
+						 >> SCU_SDCLK_DIV_SHIFT);
+			rate = ast2500_get_hpll_rate(clkin,
+						     readl(&priv->
+							   scu->h_pll_param));
+			rate = rate / apb_div;
+		}
+		break;
 	case PCLK_UART1:
 		rate = ast2500_get_uart_clk_rate(priv->scu, 1);
 		break;
@@ -436,6 +447,22 @@ static int ast2500_clk_enable(struct clk *clk)
 	struct ast2500_clk_priv *priv = dev_get_priv(clk->dev);
 
 	switch (clk->id) {
+	case BCLK_SDCLK:
+		if (readl(&priv->scu->clk_stop_ctrl1) & SCU_CLKSTOP_SDCLK) {
+			ast_scu_unlock(priv->scu);
+
+			setbits_le32(&priv->scu->sysreset_ctrl1,
+				     SCU_SYSRESET_SDIO);
+			udelay(100);
+			clrbits_le32(&priv->scu->clk_stop_ctrl1,
+				     SCU_CLKSTOP_SDCLK);
+			mdelay(10);
+			clrbits_le32(&priv->scu->sysreset_ctrl1,
+				     SCU_SYSRESET_SDIO);
+
+			ast_scu_lock(priv->scu);
+		}
+		break;
 	/*
 	 * For MAC clocks the clock rate is
 	 * configured based on whether RGMII or RMII mode has been selected
diff --git a/drivers/pinctrl/aspeed/pinctrl_ast2500.c b/drivers/pinctrl/aspeed/pinctrl_ast2500.c
index ed333b9..a6e9c0d 100644
--- a/drivers/pinctrl/aspeed/pinctrl_ast2500.c
+++ b/drivers/pinctrl/aspeed/pinctrl_ast2500.c
@@ -58,6 +58,8 @@ static const struct ast2500_group_config ast2500_groups[] = {
 	{ "MDIO1", 3, (1 << 31) | (1 << 30) },
 	{ "MAC2LINK", 1, (1 << 1) },
 	{ "MDIO2", 5, (1 << 2) },
+	{ "SD1", 5, (1 << 0) },
+	{ "SD2", 5, (1 << 1) },
 };
 
 static int ast2500_pinctrl_get_groups_count(struct udevice *dev)
-- 
1.8.3.1