All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maya Erez <merez@codeaurora.org>
To: Kalle Valo <kvalo@codeaurora.org>
Cc: Ahmad Masri <amasri@codeaurora.org>,
	linux-wireless@vger.kernel.org, wil6210@qti.qualcomm.com,
	Maya Erez <merez@codeaurora.org>
Subject: [PATCH 04/11] wil6210: fix PTK re-key race
Date: Sun,  8 Sep 2019 11:32:48 +0300	[thread overview]
Message-ID: <1567931575-27984-5-git-send-email-merez@codeaurora.org> (raw)
In-Reply-To: <1567931575-27984-1-git-send-email-merez@codeaurora.org>

From: Ahmad Masri <amasri@codeaurora.org>

Fix a race between cfg80211 add_key call and transmitting of 4/4 EAP
packet. In case the transmit is delayed until after the add key takes
place, message 4/4 will be encrypted with the new key, and the
receiver side (AP) will drop it due to MIC error.

Wil6210 will monitor and look for the transmitted packet 4/4 eap key.
In case add_key takes place before the transmission completed, then
wil6210 will let the FW store the key and wil6210 will notify the FW
to use the PTK key only after 4/4 eap packet transmission was
completed.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
Signed-off-by: Maya Erez <merez@codeaurora.org>
---
 drivers/net/wireless/ath/wil6210/cfg80211.c  |  15 ++-
 drivers/net/wireless/ath/wil6210/main.c      |   4 +
 drivers/net/wireless/ath/wil6210/netdev.c    |   3 +
 drivers/net/wireless/ath/wil6210/txrx.c      | 184 +++++++++++++++++++++++++++
 drivers/net/wireless/ath/wil6210/txrx.h      |  40 ++++++
 drivers/net/wireless/ath/wil6210/txrx_edma.c |   4 +
 drivers/net/wireless/ath/wil6210/wil6210.h   |  15 +++
 drivers/net/wireless/ath/wil6210/wmi.c       |  11 +-
 drivers/net/wireless/ath/wil6210/wmi.h       |   3 +
 9 files changed, 276 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 1883690..c70854e 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -331,6 +331,8 @@ static int wil_rf_sector_set_selected(struct wiphy *wiphy,
 	[WMI_KEY_USE_PAIRWISE]	= "PTK",
 	[WMI_KEY_USE_RX_GROUP]	= "RX_GTK",
 	[WMI_KEY_USE_TX_GROUP]	= "TX_GTK",
+	[WMI_KEY_USE_STORE_PTK]	= "STORE_PTK",
+	[WMI_KEY_USE_APPLY_PTK]	= "APPLY_PTK",
 };
 
 int wil_iftype_nl2wmi(enum nl80211_iftype type)
@@ -542,7 +544,7 @@ static int wil_cfg80211_get_station(struct wiphy *wiphy,
 /*
  * Find @idx-th active STA for specific MID for station dump.
  */
-static int wil_find_cid_by_idx(struct wil6210_priv *wil, u8 mid, int idx)
+int wil_find_cid_by_idx(struct wil6210_priv *wil, u8 mid, int idx)
 {
 	int i;
 
@@ -1554,6 +1556,7 @@ void wil_set_crypto_rx(u8 key_index, enum wmi_key_usage key_usage,
 		return;
 
 	switch (key_usage) {
+	case WMI_KEY_USE_STORE_PTK:
 	case WMI_KEY_USE_PAIRWISE:
 		for (tid = 0; tid < WIL_STA_TID_NUM; tid++) {
 			cc = &cs->tid_crypto_rx[tid].key_id[key_index];
@@ -1651,6 +1654,16 @@ static int wil_cfg80211_add_key(struct wiphy *wiphy,
 		return -EINVAL;
 	}
 
+	spin_lock_bh(&wil->eap_lock);
+	if (pairwise && wdev->iftype == NL80211_IFTYPE_STATION &&
+	    (vif->ptk_rekey_state == WIL_REKEY_M3_RECEIVED ||
+	     vif->ptk_rekey_state == WIL_REKEY_WAIT_M4_SENT)) {
+		key_usage = WMI_KEY_USE_STORE_PTK;
+		vif->ptk_rekey_state = WIL_REKEY_WAIT_M4_SENT;
+		wil_dbg_misc(wil, "Store EAPOL key\n");
+	}
+	spin_unlock_bh(&wil->eap_lock);
+
 	rc = wmi_add_cipher_key(vif, key_index, mac_addr, params->key_len,
 				params->key, key_usage);
 	if (!rc && !IS_ERR(cs)) {
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 0f270b8..2c3a192 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -373,6 +373,7 @@ static void _wil6210_disconnect_complete(struct wil6210_vif *vif,
 		}
 		clear_bit(wil_vif_fwconnecting, vif->status);
 		clear_bit(wil_vif_ft_roam, vif->status);
+		vif->ptk_rekey_state = WIL_REKEY_IDLE;
 
 		break;
 	case NL80211_IFTYPE_AP:
@@ -736,6 +737,8 @@ int wil_priv_init(struct wil6210_priv *wil)
 	INIT_LIST_HEAD(&wil->pending_wmi_ev);
 	spin_lock_init(&wil->wmi_ev_lock);
 	spin_lock_init(&wil->net_queue_lock);
+	spin_lock_init(&wil->eap_lock);
+
 	init_waitqueue_head(&wil->wq);
 	init_rwsem(&wil->mem_lock);
 
@@ -1667,6 +1670,7 @@ int wil_reset(struct wil6210_priv *wil, bool load_fw)
 			cancel_work_sync(&vif->disconnect_worker);
 			wil6210_disconnect(vif, NULL,
 					   WLAN_REASON_DEAUTH_LEAVING);
+			vif->ptk_rekey_state = WIL_REKEY_IDLE;
 		}
 	}
 	wil_bcast_fini_all(wil);
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index 59f041d..a2eca54 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -218,6 +218,7 @@ static void wil_vif_deinit(struct wil6210_vif *vif)
 	cancel_work_sync(&vif->p2p.delayed_listen_work);
 	wil_probe_client_flush(vif);
 	cancel_work_sync(&vif->probe_client_worker);
+	cancel_work_sync(&vif->enable_tx_key_worker);
 }
 
 void wil_vif_free(struct wil6210_vif *vif)
@@ -284,6 +285,7 @@ static void wil_vif_init(struct wil6210_vif *vif)
 	INIT_WORK(&vif->probe_client_worker, wil_probe_client_worker);
 	INIT_WORK(&vif->disconnect_worker, wil_disconnect_worker);
 	INIT_WORK(&vif->p2p.delayed_listen_work, wil_p2p_delayed_listen_work);
+	INIT_WORK(&vif->enable_tx_key_worker, wil_enable_tx_key_worker);
 
 	INIT_LIST_HEAD(&vif->probe_client_pending);
 
@@ -540,6 +542,7 @@ void wil_vif_remove(struct wil6210_priv *wil, u8 mid)
 	cancel_work_sync(&vif->disconnect_worker);
 	wil_probe_client_flush(vif);
 	cancel_work_sync(&vif->probe_client_worker);
+	cancel_work_sync(&vif->enable_tx_key_worker);
 	/* for VIFs, ndev will be freed by destructor after RTNL is unlocked.
 	 * the main interface will be freed in wil_if_free, we need to keep it
 	 * a bit longer so logging macros will work.
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index b6253fc..cb13652 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -725,6 +725,182 @@ static void wil_get_netif_rx_params(struct sk_buff *skb, int *cid,
 }
 
 /*
+ * Check if skb is ptk eapol key message
+ *
+ * returns a pointer to the start of the eapol key structure, NULL
+ * if frame is not PTK eapol key
+ */
+static struct wil_eapol_key *wil_is_ptk_eapol_key(struct wil6210_priv *wil,
+						  struct sk_buff *skb)
+{
+	u8 *buf;
+	const struct wil_1x_hdr *hdr;
+	struct wil_eapol_key *key;
+	u16 key_info;
+	int len = skb->len;
+
+	if (!skb_mac_header_was_set(skb)) {
+		wil_err(wil, "mac header was not set\n");
+		return NULL;
+	}
+
+	len -= skb_mac_offset(skb);
+
+	if (len < sizeof(struct ethhdr) + sizeof(struct wil_1x_hdr) +
+	    sizeof(struct wil_eapol_key))
+		return NULL;
+
+	buf = skb_mac_header(skb) + sizeof(struct ethhdr);
+
+	hdr = (const struct wil_1x_hdr *)buf;
+	if (hdr->type != WIL_1X_TYPE_EAPOL_KEY)
+		return NULL;
+
+	key = (struct wil_eapol_key *)(buf + sizeof(struct wil_1x_hdr));
+	if (key->type != WIL_EAPOL_KEY_TYPE_WPA &&
+	    key->type != WIL_EAPOL_KEY_TYPE_RSN)
+		return NULL;
+
+	key_info = be16_to_cpu(key->key_info);
+	if (!(key_info & WIL_KEY_INFO_KEY_TYPE)) /* check if pairwise */
+		return NULL;
+
+	return key;
+}
+
+static bool wil_skb_is_eap_3(struct wil6210_priv *wil, struct sk_buff *skb)
+{
+	struct wil_eapol_key *key;
+	u16 key_info;
+
+	key = wil_is_ptk_eapol_key(wil, skb);
+	if (!key)
+		return false;
+
+	key_info = be16_to_cpu(key->key_info);
+	if (key_info & (WIL_KEY_INFO_MIC |
+			WIL_KEY_INFO_ENCR_KEY_DATA)) {
+		/* 3/4 of 4-Way Handshake */
+		wil_dbg_misc(wil, "EAPOL key message 3\n");
+		return true;
+	}
+	/* 1/4 of 4-Way Handshake */
+	wil_dbg_misc(wil, "EAPOL key message 1\n");
+
+	return false;
+}
+
+static bool wil_skb_is_eap_4(struct wil6210_priv *wil, struct sk_buff *skb)
+{
+	struct wil_eapol_key *key;
+	u32 *nonce, i;
+
+	key = wil_is_ptk_eapol_key(wil, skb);
+	if (!key)
+		return false;
+
+	nonce = (u32 *)key->key_nonce;
+	for (i = 0; i < WIL_EAP_NONCE_LEN / sizeof(u32); i++, nonce++) {
+		if (*nonce != 0) {
+			/* message 2/4 */
+			wil_dbg_misc(wil, "EAPOL key message 2\n");
+			return false;
+		}
+	}
+	wil_dbg_misc(wil, "EAPOL key message 4\n");
+
+	return true;
+}
+
+void wil_enable_tx_key_worker(struct work_struct *work)
+{
+	struct wil6210_vif *vif = container_of(work,
+			struct wil6210_vif, enable_tx_key_worker);
+	struct wil6210_priv *wil = vif_to_wil(vif);
+	int rc, cid;
+
+	rtnl_lock();
+	if (vif->ptk_rekey_state != WIL_REKEY_WAIT_M4_SENT) {
+		wil_dbg_misc(wil, "Invalid rekey state = %d\n",
+			     vif->ptk_rekey_state);
+		rtnl_unlock();
+		return;
+	}
+
+	cid =  wil_find_cid_by_idx(wil, vif->mid, 0);
+	if (!wil_cid_valid(wil, cid)) {
+		wil_err(wil, "Invalid cid = %d\n", cid);
+		rtnl_unlock();
+		return;
+	}
+
+	wil_dbg_misc(wil, "Apply PTK key after eapol was sent out\n");
+	rc = wmi_add_cipher_key(vif, 0, wil->sta[cid].addr, 0, NULL,
+				WMI_KEY_USE_APPLY_PTK);
+
+	vif->ptk_rekey_state = WIL_REKEY_IDLE;
+	rtnl_unlock();
+
+	if (rc)
+		wil_err(wil, "Apply PTK key failed %d\n", rc);
+}
+
+void wil_tx_complete_handle_eapol(struct wil6210_vif *vif, struct sk_buff *skb)
+{
+	struct wil6210_priv *wil = vif_to_wil(vif);
+	struct wireless_dev *wdev = vif_to_wdev(vif);
+	bool q = false;
+
+	if (wdev->iftype != NL80211_IFTYPE_STATION ||
+	    !test_bit(WMI_FW_CAPABILITY_SPLIT_REKEY, wil->fw_capabilities))
+		return;
+
+	/* check if skb is an EAP message 4/4 */
+	if (!wil_skb_is_eap_4(wil, skb))
+		return;
+
+	spin_lock_bh(&wil->eap_lock);
+	switch (vif->ptk_rekey_state) {
+	case WIL_REKEY_IDLE:
+		/* ignore idle state, can happen due to M4 retransmission */
+		break;
+	case WIL_REKEY_M3_RECEIVED:
+		vif->ptk_rekey_state = WIL_REKEY_IDLE;
+		break;
+	case WIL_REKEY_WAIT_M4_SENT:
+		q = true;
+		break;
+	default:
+		wil_err(wil, "Unknown rekey state = %d",
+			vif->ptk_rekey_state);
+	}
+	spin_unlock_bh(&wil->eap_lock);
+
+	if (q) {
+		q = queue_work(wil->wmi_wq, &vif->enable_tx_key_worker);
+		wil_dbg_misc(wil, "queue_work of enable_tx_key_worker -> %d\n",
+			     q);
+	}
+}
+
+static void wil_rx_handle_eapol(struct wil6210_vif *vif, struct sk_buff *skb)
+{
+	struct wil6210_priv *wil = vif_to_wil(vif);
+	struct wireless_dev *wdev = vif_to_wdev(vif);
+
+	if (wdev->iftype != NL80211_IFTYPE_STATION ||
+	    !test_bit(WMI_FW_CAPABILITY_SPLIT_REKEY, wil->fw_capabilities))
+		return;
+
+	/* check if skb is a EAP message 3/4 */
+	if (!wil_skb_is_eap_3(wil, skb))
+		return;
+
+	if (vif->ptk_rekey_state == WIL_REKEY_IDLE)
+		vif->ptk_rekey_state = WIL_REKEY_M3_RECEIVED;
+}
+
+/*
  * Pass Rx packet to the netif. Update statistics.
  * Called in softirq context (NAPI poll).
  */
@@ -796,6 +972,10 @@ void wil_netif_rx(struct sk_buff *skb, struct net_device *ndev, int cid,
 	if (skb) { /* deliver to local stack */
 		skb->protocol = eth_type_trans(skb, ndev);
 		skb->dev = ndev;
+
+		if (skb->protocol == cpu_to_be16(ETH_P_PAE))
+			wil_rx_handle_eapol(vif, skb);
+
 		if (gro)
 			rc = napi_gro_receive(&wil->napi_rx, skb);
 		else
@@ -2332,6 +2512,10 @@ int wil_tx_complete(struct wil6210_vif *vif, int ringid)
 					if (stats)
 						stats->tx_errors++;
 				}
+
+				if (skb->protocol == cpu_to_be16(ETH_P_PAE))
+					wil_tx_complete_handle_eapol(vif, skb);
+
 				wil_consume_skb(skb, d->dma.error == 0);
 			}
 			memset(ctx, 0, sizeof(*ctx));
diff --git a/drivers/net/wireless/ath/wil6210/txrx.h b/drivers/net/wireless/ath/wil6210/txrx.h
index fceb251..5120475b 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.h
+++ b/drivers/net/wireless/ath/wil6210/txrx.h
@@ -423,6 +423,46 @@ struct vring_rx_mac {
 #define RX_DMA_STATUS_PHY_INFO	BIT(6)
 #define RX_DMA_STATUS_FFM	BIT(7) /* EtherType Flex Filter Match */
 
+/* IEEE 802.11, 8.5.2 EAPOL-Key frames */
+#define WIL_KEY_INFO_KEY_TYPE BIT(3) /* val of 1 = Pairwise, 0 = Group key */
+
+#define WIL_KEY_INFO_MIC BIT(8)
+#define WIL_KEY_INFO_ENCR_KEY_DATA BIT(12) /* for rsn only */
+
+#define WIL_EAP_NONCE_LEN 32
+#define WIL_EAP_KEY_RSC_LEN 8
+#define WIL_EAP_REPLAY_COUNTER_LEN 8
+#define WIL_EAP_KEY_IV_LEN 16
+#define WIL_EAP_KEY_ID_LEN 8
+
+enum {
+	WIL_1X_TYPE_EAP_PACKET = 0,
+	WIL_1X_TYPE_EAPOL_START = 1,
+	WIL_1X_TYPE_EAPOL_LOGOFF = 2,
+	WIL_1X_TYPE_EAPOL_KEY = 3,
+};
+
+#define WIL_EAPOL_KEY_TYPE_RSN 2
+#define WIL_EAPOL_KEY_TYPE_WPA 254
+
+struct wil_1x_hdr {
+	u8 version;
+	u8 type;
+	__be16 length;
+	/* followed by data */
+} __packed;
+
+struct wil_eapol_key {
+	u8 type;
+	__be16 key_info;
+	__be16 key_length;
+	u8 replay_counter[WIL_EAP_REPLAY_COUNTER_LEN];
+	u8 key_nonce[WIL_EAP_NONCE_LEN];
+	u8 key_iv[WIL_EAP_KEY_IV_LEN];
+	u8 key_rsc[WIL_EAP_KEY_RSC_LEN];
+	u8 key_id[WIL_EAP_KEY_ID_LEN];
+} __packed;
+
 struct vring_rx_dma {
 	u32 d0;
 	struct wil_ring_dma_addr addr;
diff --git a/drivers/net/wireless/ath/wil6210/txrx_edma.c b/drivers/net/wireless/ath/wil6210/txrx_edma.c
index 29a9a24..f313041 100644
--- a/drivers/net/wireless/ath/wil6210/txrx_edma.c
+++ b/drivers/net/wireless/ath/wil6210/txrx_edma.c
@@ -1257,6 +1257,10 @@ int wil_tx_sring_handler(struct wil6210_priv *wil,
 					if (stats)
 						stats->tx_errors++;
 				}
+
+				if (skb->protocol == cpu_to_be16(ETH_P_PAE))
+					wil_tx_complete_handle_eapol(vif, skb);
+
 				wil_consume_skb(skb, msg.status == 0);
 			}
 			memset(ctx, 0, sizeof(*ctx));
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 6463310..dd0c87a 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -732,6 +732,12 @@ enum wil_sta_status {
 	wil_sta_connected = 2,
 };
 
+enum wil_rekey_state {
+	WIL_REKEY_IDLE = 0,
+	WIL_REKEY_M3_RECEIVED = 1,
+	WIL_REKEY_WAIT_M4_SENT = 2,
+};
+
 /**
  * struct wil_sta_info - data for peer
  *
@@ -880,6 +886,10 @@ struct wil6210_vif {
 	int net_queue_stopped; /* netif_tx_stop_all_queues invoked */
 	bool fw_stats_ready; /* per-cid statistics are ready inside sta_info */
 	u64 fw_stats_tsf; /* measurement timestamp */
+
+	/* PTK rekey race prevention, this is relevant to station mode only */
+	enum wil_rekey_state ptk_rekey_state;
+	struct work_struct enable_tx_key_worker;
 };
 
 /**
@@ -980,6 +990,7 @@ struct wil6210_priv {
 	 */
 	spinlock_t wmi_ev_lock;
 	spinlock_t net_queue_lock; /* guarding stop/wake netif queue */
+	spinlock_t eap_lock; /* guarding access to eap rekey fields */
 	struct napi_struct napi_rx;
 	struct napi_struct napi_tx;
 	struct net_device napi_ndev; /* dummy net_device serving all VIFs */
@@ -1229,6 +1240,7 @@ int wil_ps_update(struct wil6210_priv *wil,
 void wil_refresh_fw_capabilities(struct wil6210_priv *wil);
 void wil_mbox_ring_le2cpus(struct wil6210_mbox_ring *r);
 int wil_find_cid(struct wil6210_priv *wil, u8 mid, const u8 *mac);
+int wil_find_cid_by_idx(struct wil6210_priv *wil, u8 mid, int idx);
 void wil_set_ethtoolops(struct net_device *ndev);
 
 struct fw_map *wil_find_fw_mapping(const char *section);
@@ -1354,6 +1366,7 @@ void wil6210_disconnect_complete(struct wil6210_vif *vif, const u8 *bssid,
 void wil_probe_client_flush(struct wil6210_vif *vif);
 void wil_probe_client_worker(struct work_struct *work);
 void wil_disconnect_worker(struct work_struct *work);
+void wil_enable_tx_key_worker(struct work_struct *work);
 
 void wil_init_txrx_ops(struct wil6210_priv *wil);
 
@@ -1373,6 +1386,8 @@ void wil_update_net_queues_bh(struct wil6210_priv *wil, struct wil6210_vif *vif,
 			      struct wil_ring *ring, bool check_stop);
 netdev_tx_t wil_start_xmit(struct sk_buff *skb, struct net_device *ndev);
 int wil_tx_complete(struct wil6210_vif *vif, int ringid);
+void wil_tx_complete_handle_eapol(struct wil6210_vif *vif,
+				  struct sk_buff *skb);
 void wil6210_unmask_irq_tx(struct wil6210_priv *wil);
 void wil6210_unmask_irq_tx_edma(struct wil6210_priv *wil);
 
diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c
index 5760d14..73fe9bf 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.c
+++ b/drivers/net/wireless/ath/wil6210/wmi.c
@@ -2438,10 +2438,17 @@ int wmi_add_cipher_key(struct wil6210_vif *vif, u8 key_index,
 		.key_len = key_len,
 	};
 
-	if (!key || (key_len > sizeof(cmd.key)))
+	if (key_len > sizeof(cmd.key))
 		return -EINVAL;
 
-	memcpy(cmd.key, key, key_len);
+	/* key len = 0 is allowed only for usage of WMI_KEY_USE_APPLY */
+	if ((key_len == 0 || !key) &&
+	    key_usage != WMI_KEY_USE_APPLY_PTK)
+		return -EINVAL;
+
+	if (key)
+		memcpy(cmd.key, key, key_len);
+
 	if (mac_addr)
 		memcpy(cmd.mac, mac_addr, WMI_MAC_LEN);
 
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index d75022b..a2f7034 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -109,6 +109,7 @@ enum wmi_fw_capability {
 	WMI_FW_CAPABILITY_CHANNEL_4			= 26,
 	WMI_FW_CAPABILITY_IPA				= 27,
 	WMI_FW_CAPABILITY_TEMPERATURE_ALL_RF		= 30,
+	WMI_FW_CAPABILITY_SPLIT_REKEY			= 31,
 	WMI_FW_CAPABILITY_MAX,
 };
 
@@ -421,6 +422,8 @@ enum wmi_key_usage {
 	WMI_KEY_USE_PAIRWISE	= 0x00,
 	WMI_KEY_USE_RX_GROUP	= 0x01,
 	WMI_KEY_USE_TX_GROUP	= 0x02,
+	WMI_KEY_USE_STORE_PTK	= 0x03,
+	WMI_KEY_USE_APPLY_PTK	= 0x04,
 };
 
 struct wmi_add_cipher_key_cmd {
-- 
1.9.1


  parent reply	other threads:[~2019-09-08  8:39 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-08  8:32 [PATCH 00/11] wil6210 patches Maya Erez
2019-09-08  8:32 ` [PATCH 01/11] wil6210: add wil_netif_rx() helper function Maya Erez
2019-09-12 15:08   ` Kalle Valo
2019-09-08  8:32 ` [PATCH 02/11] wil6210: add support for pci linkdown recovery Maya Erez
2019-09-12 15:22   ` Kalle Valo
2019-09-08  8:32 ` [PATCH 03/11] wil6210: add debugfs to show PMC ring content Maya Erez
2019-09-08  8:32 ` Maya Erez [this message]
2019-09-10 13:23   ` [PATCH 04/11] wil6210: fix PTK re-key race Kalle Valo
2019-09-11  7:50     ` Arend Van Spriel
2019-09-11 18:32     ` Alexander Wetzel
2019-09-12 17:39       ` Denis Kenzior
2019-09-12 21:04         ` Alexander Wetzel
2019-09-13  8:04           ` Arend Van Spriel
2019-09-13 14:33             ` Denis Kenzior
2019-09-13 20:48               ` Alexander Wetzel
2019-09-17 15:32                 ` Denis Kenzior
2019-09-13 18:43             ` Alexander Wetzel
2019-09-08  8:32 ` [PATCH 05/11] wil6210: make sure DR bit is read before rest of the status message Maya Erez
2019-09-08  8:32 ` [PATCH 06/11] wil6210: verify cid value is valid Maya Erez
2019-09-08  8:32 ` [PATCH 07/11] wil6210: properly initialize discovery_expired_work Maya Erez
2019-09-08  8:32 ` [PATCH 08/11] wil6210: report boottime_ns in scan results Maya Erez
2019-09-08  8:32 ` [PATCH 09/11] wil6210: use writel_relaxed in wil_debugfs_iomem_x32_set Maya Erez
2019-09-08  8:32 ` [PATCH 10/11] wil6210: fix RX short frame check Maya Erez
2019-09-08  8:32 ` [PATCH 11/11] wil6210: ignore reset errors for FW during probe Maya Erez

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1567931575-27984-5-git-send-email-merez@codeaurora.org \
    --to=merez@codeaurora.org \
    --cc=amasri@codeaurora.org \
    --cc=kvalo@codeaurora.org \
    --cc=linux-wireless@vger.kernel.org \
    --cc=wil6210@qti.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.