* [alsa-devel] [PATCH 0/2] ASoC: mt8183: fix audio playback slowly after playback during bootup @ 2019-09-12 9:54 ` Jiaxin Yu 0 siblings, 0 replies; 10+ messages in thread From: Jiaxin Yu @ 2019-09-12 9:54 UTC (permalink / raw) To: broonie, robh+dt Cc: alsa-devel, lgirdwood, jiaxin.yu, tzungbi, linux-mediatek, eason.yen These two patches fix audio playack slowly after playbakc during bootup. The patches are based on broonie tree "for-next" branch. Jiaxin Yu (2): ASoC: dt-bingdings: mediatek: mt8183: add a property "medaitek,toprgu" ASoC: mt8183: fix audio playback slowly after playback during bootup .../bindings/sound/mt8183-afe-pcm.txt | 2 ++ sound/soc/mediatek/common/mtk-base-afe.h | 1 + sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 21 +++++++++++++++++++ sound/soc/mediatek/mt8183/mt8183-reg.h | 6 ++++++ 4 files changed, 30 insertions(+) -- 2.18.0 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
* [PATCH 0/2] ASoC: mt8183: fix audio playback slowly after playback during bootup @ 2019-09-12 9:54 ` Jiaxin Yu 0 siblings, 0 replies; 10+ messages in thread From: Jiaxin Yu @ 2019-09-12 9:54 UTC (permalink / raw) To: broonie-DgEjT+Ai2ygdnm+yROfE0A, robh+dt-DgEjT+Ai2ygdnm+yROfE0A Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, jiaxin.yu-NuS5LvNUpcJWk0Htik3J/w, perex-/Fr2/VpizcU, tzungbi-hpIqsD4AKlfQT0dZR+AlfA, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, eason.yen-NuS5LvNUpcJWk0Htik3J/w These two patches fix audio playack slowly after playbakc during bootup. The patches are based on broonie tree "for-next" branch. Jiaxin Yu (2): ASoC: dt-bingdings: mediatek: mt8183: add a property "medaitek,toprgu" ASoC: mt8183: fix audio playback slowly after playback during bootup .../bindings/sound/mt8183-afe-pcm.txt | 2 ++ sound/soc/mediatek/common/mtk-base-afe.h | 1 + sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 21 +++++++++++++++++++ sound/soc/mediatek/mt8183/mt8183-reg.h | 6 ++++++ 4 files changed, 30 insertions(+) -- 2.18.0 ^ permalink raw reply [flat|nested] 10+ messages in thread
* [alsa-devel] [PATCH 1/2] ASoC: dt-bingdings: mediatek: mt8183: add a property "medaitek, toprgu" @ 2019-09-12 9:54 ` Jiaxin Yu 0 siblings, 0 replies; 10+ messages in thread From: Jiaxin Yu @ 2019-09-12 9:54 UTC (permalink / raw) To: broonie, robh+dt Cc: alsa-devel, lgirdwood, jiaxin.yu, tzungbi, linux-mediatek, eason.yen This patch adds a property "mediatek,toprgu" in example so that we could use reset controller(usually we call it toprgu or watchdog) to reset audio domain regs. Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> --- Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt index 396ba38619f6..45ca182a4ecc 100644 --- a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt @@ -4,6 +4,7 @@ Required properties: - compatible = "mediatek,mt68183-audio"; - reg: register location and size - interrupts: should contain AFE interrupt +- mediatek,toprgu: A phandle to the TOPRGU which for reset controller unit - power-domains: should define the power domain - clocks: Must contain an entry for each entry in clock-names - clock-names: should have these clock names: @@ -20,6 +21,7 @@ Example: compatible = "mediatek,mt8183-audio"; reg = <0 0x11220000 0 0x1000>; interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>; + mediatek,toprgu = <&watchdog>; power-domains = <&scpsys MT8183_POWER_DOMAIN_AUDIO>; clocks = <&infrasys CLK_INFRA_AUDIO>, <&infrasys CLK_INFRA_AUDIO_26M_BCLK>, -- 2.18.0 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 1/2] ASoC: dt-bingdings: mediatek: mt8183: add a property "medaitek, toprgu" @ 2019-09-12 9:54 ` Jiaxin Yu 0 siblings, 0 replies; 10+ messages in thread From: Jiaxin Yu @ 2019-09-12 9:54 UTC (permalink / raw) To: broonie-DgEjT+Ai2ygdnm+yROfE0A, robh+dt-DgEjT+Ai2ygdnm+yROfE0A Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, jiaxin.yu-NuS5LvNUpcJWk0Htik3J/w, perex-/Fr2/VpizcU, tzungbi-hpIqsD4AKlfQT0dZR+AlfA, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, eason.yen-NuS5LvNUpcJWk0Htik3J/w This patch adds a property "mediatek,toprgu" in example so that we could use reset controller(usually we call it toprgu or watchdog) to reset audio domain regs. Signed-off-by: Jiaxin Yu <jiaxin.yu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt index 396ba38619f6..45ca182a4ecc 100644 --- a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt +++ b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt @@ -4,6 +4,7 @@ Required properties: - compatible = "mediatek,mt68183-audio"; - reg: register location and size - interrupts: should contain AFE interrupt +- mediatek,toprgu: A phandle to the TOPRGU which for reset controller unit - power-domains: should define the power domain - clocks: Must contain an entry for each entry in clock-names - clock-names: should have these clock names: @@ -20,6 +21,7 @@ Example: compatible = "mediatek,mt8183-audio"; reg = <0 0x11220000 0 0x1000>; interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>; + mediatek,toprgu = <&watchdog>; power-domains = <&scpsys MT8183_POWER_DOMAIN_AUDIO>; clocks = <&infrasys CLK_INFRA_AUDIO>, <&infrasys CLK_INFRA_AUDIO_26M_BCLK>, -- 2.18.0 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [alsa-devel] [PATCH 1/2] ASoC: dt-bingdings: mediatek: mt8183: add a property "medaitek, toprgu" @ 2019-09-12 16:52 ` Yingjoe Chen 0 siblings, 0 replies; 10+ messages in thread From: Yingjoe Chen @ 2019-09-12 16:52 UTC (permalink / raw) To: Jiaxin Yu Cc: alsa-devel, lgirdwood, robh+dt, tzungbi, broonie, linux-mediatek, eason.yen On Thu, 2019-09-12 at 17:54 +0800, Jiaxin Yu wrote: > This patch adds a property "mediatek,toprgu" in example so that we could > use reset controller(usually we call it toprgu or watchdog) to reset audio > domain regs. > > Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> > --- > Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt > index 396ba38619f6..45ca182a4ecc 100644 > --- a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt > +++ b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt > @@ -4,6 +4,7 @@ Required properties: > - compatible = "mediatek,mt68183-audio"; > - reg: register location and size > - interrupts: should contain AFE interrupt > +- mediatek,toprgu: A phandle to the TOPRGU which for reset controller unit > - power-domains: should define the power domain > - clocks: Must contain an entry for each entry in clock-names > - clock-names: should have these clock names: > @@ -20,6 +21,7 @@ Example: > compatible = "mediatek,mt8183-audio"; > reg = <0 0x11220000 0 0x1000>; > interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>; > + mediatek,toprgu = <&watchdog>; As mentioned in the other patch, since this is reset controller, you should use Documentation/devicetree/bindings/reset/reset.txt instead. Joe.C _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 1/2] ASoC: dt-bingdings: mediatek: mt8183: add a property "medaitek, toprgu" @ 2019-09-12 16:52 ` Yingjoe Chen 0 siblings, 0 replies; 10+ messages in thread From: Yingjoe Chen @ 2019-09-12 16:52 UTC (permalink / raw) To: Jiaxin Yu Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, perex-/Fr2/VpizcU, tzungbi-hpIqsD4AKlfQT0dZR+AlfA, broonie-DgEjT+Ai2ygdnm+yROfE0A, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, eason.yen-NuS5LvNUpcJWk0Htik3J/w On Thu, 2019-09-12 at 17:54 +0800, Jiaxin Yu wrote: > This patch adds a property "mediatek,toprgu" in example so that we could > use reset controller(usually we call it toprgu or watchdog) to reset audio > domain regs. > > Signed-off-by: Jiaxin Yu <jiaxin.yu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > --- > Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt > index 396ba38619f6..45ca182a4ecc 100644 > --- a/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt > +++ b/Documentation/devicetree/bindings/sound/mt8183-afe-pcm.txt > @@ -4,6 +4,7 @@ Required properties: > - compatible = "mediatek,mt68183-audio"; > - reg: register location and size > - interrupts: should contain AFE interrupt > +- mediatek,toprgu: A phandle to the TOPRGU which for reset controller unit > - power-domains: should define the power domain > - clocks: Must contain an entry for each entry in clock-names > - clock-names: should have these clock names: > @@ -20,6 +21,7 @@ Example: > compatible = "mediatek,mt8183-audio"; > reg = <0 0x11220000 0 0x1000>; > interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>; > + mediatek,toprgu = <&watchdog>; As mentioned in the other patch, since this is reset controller, you should use Documentation/devicetree/bindings/reset/reset.txt instead. Joe.C ^ permalink raw reply [flat|nested] 10+ messages in thread
* [alsa-devel] [PATCH 2/2] ASoC: mt8183: fix audio playback slowly after playback during bootup @ 2019-09-12 9:54 ` Jiaxin Yu 0 siblings, 0 replies; 10+ messages in thread From: Jiaxin Yu @ 2019-09-12 9:54 UTC (permalink / raw) To: broonie, robh+dt Cc: alsa-devel, lgirdwood, jiaxin.yu, tzungbi, linux-mediatek, eason.yen Before regmap_reinit_cache we must reset audio reg as default value. So we use reset controller unit(toprgu) to reset audio hw. Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> --- sound/soc/mediatek/common/mtk-base-afe.h | 1 + sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 21 +++++++++++++++++++++ sound/soc/mediatek/mt8183/mt8183-reg.h | 6 ++++++ 3 files changed, 28 insertions(+) diff --git a/sound/soc/mediatek/common/mtk-base-afe.h b/sound/soc/mediatek/common/mtk-base-afe.h index 60cb609a9790..bccc079ee660 100644 --- a/sound/soc/mediatek/common/mtk-base-afe.h +++ b/sound/soc/mediatek/common/mtk-base-afe.h @@ -60,6 +60,7 @@ struct mtk_base_afe { void __iomem *base_addr; struct device *dev; struct regmap *regmap; + struct regmap *toprgu_regmap; struct mutex irq_alloc_lock; /* dynamic alloc irq lock */ unsigned int const *reg_back_up_list; diff --git a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c index 4a31106d3471..0e5634b3a8e3 100644 --- a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c +++ b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c @@ -1089,6 +1089,7 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) struct mtk_base_afe *afe; struct mt8183_afe_private *afe_priv; struct device *dev; + unsigned int reg_value; int i, irq_id, ret; afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL); @@ -1126,6 +1127,26 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) return ret; } + /* toprgu_regmap init */ + afe->toprgu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "mediatek,toprgu"); + if (IS_ERR(afe->toprgu_regmap)) { + dev_err(dev, "could not get toprgu_regmap from dev\n"); + return PTR_ERR(afe->toprgu_regmap); + } + + /* read TOPRGUWDT_SWSYSRST, the high 8bits must be zero */ + regmap_read(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, ®_value); + + /* write TOPRGUWDT_SWSYSRST, we need set high 8bits as 0x88 first */ + reg_value |= 0x88000000; + + /* reset audio domain registers */ + reg_value |= 1 << AUDIO_RST_SFT; + regmap_write(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, reg_value); + reg_value &= ~(1 << AUDIO_RST_SFT); + regmap_write(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, reg_value); + /* enable clock for regcache get default value from hw */ afe_priv->pm_runtime_bypass_reg_ctl = true; pm_runtime_get_sync(&pdev->dev); diff --git a/sound/soc/mediatek/mt8183/mt8183-reg.h b/sound/soc/mediatek/mt8183/mt8183-reg.h index e544a09e1913..8579ac4052ff 100644 --- a/sound/soc/mediatek/mt8183/mt8183-reg.h +++ b/sound/soc/mediatek/mt8183/mt8183-reg.h @@ -413,6 +413,12 @@ #define AFE_MAX_REGISTER AFE_GENERAL2_ASRC_2CH_CON13 #define AFE_IRQ_STATUS_BITS 0x1fff +/* TOPRGUWDT_SWSYSRST */ +#define TOPRGUWDT_SWSYSRST 0x18 +#define AUDIO_RST_SFT 17 +#define AUDIO_RST_MASK 0x1 +#define AUDIO_RST_MASK_SFT (0x1 << 17) + /* AUDIO_TOP_CON3 */ #define BCK_INVERSE_SFT 3 #define BCK_INVERSE_MASK 0x1 -- 2.18.0 _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply related [flat|nested] 10+ messages in thread
* [PATCH 2/2] ASoC: mt8183: fix audio playback slowly after playback during bootup @ 2019-09-12 9:54 ` Jiaxin Yu 0 siblings, 0 replies; 10+ messages in thread From: Jiaxin Yu @ 2019-09-12 9:54 UTC (permalink / raw) To: broonie-DgEjT+Ai2ygdnm+yROfE0A, robh+dt-DgEjT+Ai2ygdnm+yROfE0A Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, jiaxin.yu-NuS5LvNUpcJWk0Htik3J/w, perex-/Fr2/VpizcU, tzungbi-hpIqsD4AKlfQT0dZR+AlfA, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, eason.yen-NuS5LvNUpcJWk0Htik3J/w Before regmap_reinit_cache we must reset audio reg as default value. So we use reset controller unit(toprgu) to reset audio hw. Signed-off-by: Jiaxin Yu <jiaxin.yu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> --- sound/soc/mediatek/common/mtk-base-afe.h | 1 + sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 21 +++++++++++++++++++++ sound/soc/mediatek/mt8183/mt8183-reg.h | 6 ++++++ 3 files changed, 28 insertions(+) diff --git a/sound/soc/mediatek/common/mtk-base-afe.h b/sound/soc/mediatek/common/mtk-base-afe.h index 60cb609a9790..bccc079ee660 100644 --- a/sound/soc/mediatek/common/mtk-base-afe.h +++ b/sound/soc/mediatek/common/mtk-base-afe.h @@ -60,6 +60,7 @@ struct mtk_base_afe { void __iomem *base_addr; struct device *dev; struct regmap *regmap; + struct regmap *toprgu_regmap; struct mutex irq_alloc_lock; /* dynamic alloc irq lock */ unsigned int const *reg_back_up_list; diff --git a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c index 4a31106d3471..0e5634b3a8e3 100644 --- a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c +++ b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c @@ -1089,6 +1089,7 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) struct mtk_base_afe *afe; struct mt8183_afe_private *afe_priv; struct device *dev; + unsigned int reg_value; int i, irq_id, ret; afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL); @@ -1126,6 +1127,26 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) return ret; } + /* toprgu_regmap init */ + afe->toprgu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, + "mediatek,toprgu"); + if (IS_ERR(afe->toprgu_regmap)) { + dev_err(dev, "could not get toprgu_regmap from dev\n"); + return PTR_ERR(afe->toprgu_regmap); + } + + /* read TOPRGUWDT_SWSYSRST, the high 8bits must be zero */ + regmap_read(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, ®_value); + + /* write TOPRGUWDT_SWSYSRST, we need set high 8bits as 0x88 first */ + reg_value |= 0x88000000; + + /* reset audio domain registers */ + reg_value |= 1 << AUDIO_RST_SFT; + regmap_write(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, reg_value); + reg_value &= ~(1 << AUDIO_RST_SFT); + regmap_write(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, reg_value); + /* enable clock for regcache get default value from hw */ afe_priv->pm_runtime_bypass_reg_ctl = true; pm_runtime_get_sync(&pdev->dev); diff --git a/sound/soc/mediatek/mt8183/mt8183-reg.h b/sound/soc/mediatek/mt8183/mt8183-reg.h index e544a09e1913..8579ac4052ff 100644 --- a/sound/soc/mediatek/mt8183/mt8183-reg.h +++ b/sound/soc/mediatek/mt8183/mt8183-reg.h @@ -413,6 +413,12 @@ #define AFE_MAX_REGISTER AFE_GENERAL2_ASRC_2CH_CON13 #define AFE_IRQ_STATUS_BITS 0x1fff +/* TOPRGUWDT_SWSYSRST */ +#define TOPRGUWDT_SWSYSRST 0x18 +#define AUDIO_RST_SFT 17 +#define AUDIO_RST_MASK 0x1 +#define AUDIO_RST_MASK_SFT (0x1 << 17) + /* AUDIO_TOP_CON3 */ #define BCK_INVERSE_SFT 3 #define BCK_INVERSE_MASK 0x1 -- 2.18.0 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [alsa-devel] [PATCH 2/2] ASoC: mt8183: fix audio playback slowly after playback during bootup @ 2019-09-12 16:50 ` Yingjoe Chen 0 siblings, 0 replies; 10+ messages in thread From: Yingjoe Chen @ 2019-09-12 16:50 UTC (permalink / raw) To: Jiaxin Yu Cc: alsa-devel, lgirdwood, robh+dt, tzungbi, broonie, linux-mediatek, eason.yen On Thu, 2019-09-12 at 17:54 +0800, Jiaxin Yu wrote: > Before regmap_reinit_cache we must reset audio reg as default value. > So we use reset controller unit(toprgu) to reset audio hw. > > Signed-off-by: Jiaxin Yu <jiaxin.yu@mediatek.com> > --- > sound/soc/mediatek/common/mtk-base-afe.h | 1 + > sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 21 +++++++++++++++++++++ > sound/soc/mediatek/mt8183/mt8183-reg.h | 6 ++++++ > 3 files changed, 28 insertions(+) > > diff --git a/sound/soc/mediatek/common/mtk-base-afe.h b/sound/soc/mediatek/common/mtk-base-afe.h > index 60cb609a9790..bccc079ee660 100644 > --- a/sound/soc/mediatek/common/mtk-base-afe.h > +++ b/sound/soc/mediatek/common/mtk-base-afe.h > @@ -60,6 +60,7 @@ struct mtk_base_afe { > void __iomem *base_addr; > struct device *dev; > struct regmap *regmap; > + struct regmap *toprgu_regmap; > struct mutex irq_alloc_lock; /* dynamic alloc irq lock */ > > unsigned int const *reg_back_up_list; > diff --git a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c > index 4a31106d3471..0e5634b3a8e3 100644 > --- a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c > +++ b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c > @@ -1089,6 +1089,7 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) > struct mtk_base_afe *afe; > struct mt8183_afe_private *afe_priv; > struct device *dev; > + unsigned int reg_value; > int i, irq_id, ret; > > afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL); > @@ -1126,6 +1127,26 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) > return ret; > } > > + /* toprgu_regmap init */ > + afe->toprgu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, > + "mediatek,toprgu"); > + if (IS_ERR(afe->toprgu_regmap)) { > + dev_err(dev, "could not get toprgu_regmap from dev\n"); > + return PTR_ERR(afe->toprgu_regmap); > + } > + > + /* read TOPRGUWDT_SWSYSRST, the high 8bits must be zero */ > + regmap_read(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, ®_value); > + > + /* write TOPRGUWDT_SWSYSRST, we need set high 8bits as 0x88 first */ > + reg_value |= 0x88000000; > + > + /* reset audio domain registers */ > + reg_value |= 1 << AUDIO_RST_SFT; > + regmap_write(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, reg_value); > + reg_value &= ~(1 << AUDIO_RST_SFT); > + regmap_write(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, reg_value); This register contain reset bits for many components. If components access it directly at the same time, we might have race condition. Instead, watchdog driver should export this as reset controller so this driver can access it using reset API. Joe.C _______________________________________________ Alsa-devel mailing list Alsa-devel@alsa-project.org https://mailman.alsa-project.org/mailman/listinfo/alsa-devel ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH 2/2] ASoC: mt8183: fix audio playback slowly after playback during bootup @ 2019-09-12 16:50 ` Yingjoe Chen 0 siblings, 0 replies; 10+ messages in thread From: Yingjoe Chen @ 2019-09-12 16:50 UTC (permalink / raw) To: Jiaxin Yu Cc: alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw, lgirdwood-Re5JQEeQqe8AvxtiuMwx3w, robh+dt-DgEjT+Ai2ygdnm+yROfE0A, perex-/Fr2/VpizcU, tzungbi-hpIqsD4AKlfQT0dZR+AlfA, broonie-DgEjT+Ai2ygdnm+yROfE0A, linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, eason.yen-NuS5LvNUpcJWk0Htik3J/w On Thu, 2019-09-12 at 17:54 +0800, Jiaxin Yu wrote: > Before regmap_reinit_cache we must reset audio reg as default value. > So we use reset controller unit(toprgu) to reset audio hw. > > Signed-off-by: Jiaxin Yu <jiaxin.yu-NuS5LvNUpcJWk0Htik3J/w@public.gmane.org> > --- > sound/soc/mediatek/common/mtk-base-afe.h | 1 + > sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 21 +++++++++++++++++++++ > sound/soc/mediatek/mt8183/mt8183-reg.h | 6 ++++++ > 3 files changed, 28 insertions(+) > > diff --git a/sound/soc/mediatek/common/mtk-base-afe.h b/sound/soc/mediatek/common/mtk-base-afe.h > index 60cb609a9790..bccc079ee660 100644 > --- a/sound/soc/mediatek/common/mtk-base-afe.h > +++ b/sound/soc/mediatek/common/mtk-base-afe.h > @@ -60,6 +60,7 @@ struct mtk_base_afe { > void __iomem *base_addr; > struct device *dev; > struct regmap *regmap; > + struct regmap *toprgu_regmap; > struct mutex irq_alloc_lock; /* dynamic alloc irq lock */ > > unsigned int const *reg_back_up_list; > diff --git a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c > index 4a31106d3471..0e5634b3a8e3 100644 > --- a/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c > +++ b/sound/soc/mediatek/mt8183/mt8183-afe-pcm.c > @@ -1089,6 +1089,7 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) > struct mtk_base_afe *afe; > struct mt8183_afe_private *afe_priv; > struct device *dev; > + unsigned int reg_value; > int i, irq_id, ret; > > afe = devm_kzalloc(&pdev->dev, sizeof(*afe), GFP_KERNEL); > @@ -1126,6 +1127,26 @@ static int mt8183_afe_pcm_dev_probe(struct platform_device *pdev) > return ret; > } > > + /* toprgu_regmap init */ > + afe->toprgu_regmap = syscon_regmap_lookup_by_phandle(dev->of_node, > + "mediatek,toprgu"); > + if (IS_ERR(afe->toprgu_regmap)) { > + dev_err(dev, "could not get toprgu_regmap from dev\n"); > + return PTR_ERR(afe->toprgu_regmap); > + } > + > + /* read TOPRGUWDT_SWSYSRST, the high 8bits must be zero */ > + regmap_read(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, ®_value); > + > + /* write TOPRGUWDT_SWSYSRST, we need set high 8bits as 0x88 first */ > + reg_value |= 0x88000000; > + > + /* reset audio domain registers */ > + reg_value |= 1 << AUDIO_RST_SFT; > + regmap_write(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, reg_value); > + reg_value &= ~(1 << AUDIO_RST_SFT); > + regmap_write(afe->toprgu_regmap, TOPRGUWDT_SWSYSRST, reg_value); This register contain reset bits for many components. If components access it directly at the same time, we might have race condition. Instead, watchdog driver should export this as reset controller so this driver can access it using reset API. Joe.C ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-09-12 16:53 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2019-09-12 9:54 [alsa-devel] [PATCH 0/2] ASoC: mt8183: fix audio playback slowly after playback during bootup Jiaxin Yu 2019-09-12 9:54 ` Jiaxin Yu 2019-09-12 9:54 ` [alsa-devel] [PATCH 1/2] ASoC: dt-bingdings: mediatek: mt8183: add a property "medaitek, toprgu" Jiaxin Yu 2019-09-12 9:54 ` Jiaxin Yu 2019-09-12 16:52 ` [alsa-devel] " Yingjoe Chen 2019-09-12 16:52 ` Yingjoe Chen 2019-09-12 9:54 ` [alsa-devel] [PATCH 2/2] ASoC: mt8183: fix audio playback slowly after playback during bootup Jiaxin Yu 2019-09-12 9:54 ` Jiaxin Yu 2019-09-12 16:50 ` [alsa-devel] " Yingjoe Chen 2019-09-12 16:50 ` Yingjoe Chen
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.