All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: William.Kuzeja@stratus.com, gregkh@linuxfoundation.org,
	mathias.nyman@linux.intel.com, stable@vger.kernel.org,
	torez@redhat.com, william.kuzeja@stratus.com
Subject: patch "xhci: Prevent deadlock when xhci adapter breaks during init" added to usb-linus
Date: Fri, 04 Oct 2019 14:33:07 +0200	[thread overview]
Message-ID: <157019238714363@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    xhci: Prevent deadlock when xhci adapter breaks during init

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


From 8de66b0e6a56ff10dd00d2b0f2ae52e300178587 Mon Sep 17 00:00:00 2001
From: Bill Kuzeja <William.Kuzeja@stratus.com>
Date: Fri, 4 Oct 2019 14:59:31 +0300
Subject: xhci: Prevent deadlock when xhci adapter breaks during init

The system can hit a deadlock if an xhci adapter breaks while initializing.
The deadlock is between two threads: thread 1 is tearing down the
adapter and is stuck in usb_unlocked_disable_lpm waiting to lock the
hcd->handwidth_mutex. Thread 2 is holding this mutex (while still trying
to add a usb device), but is stuck in xhci_endpoint_reset waiting for a
stop or config command to complete. A reboot is required to resolve.

It turns out when calling xhci_queue_stop_endpoint and
xhci_queue_configure_endpoint in xhci_endpoint_reset, the return code is
not checked for errors. If the timing is right and the adapter dies just
before either of these commands get issued, we hang indefinitely waiting
for a completion on a command that didn't get issued.

This wasn't a problem before the following fix because we didn't send
commands in xhci_endpoint_reset:

commit f5249461b504 ("xhci: Clear the host side toggle manually when
    endpoint is soft reset")

With the patch I am submitting, a duration test which breaks adapters
during initialization (and which deadlocks with the standard kernel) runs
without issue.

Fixes: f5249461b504 ("xhci: Clear the host side toggle manually when endpoint is soft reset")
Cc: <stable@vger.kernel.org> # v4.17+
Cc: Torez Smith <torez@redhat.com>
Signed-off-by: Bill Kuzeja <william.kuzeja@stratus.com>
Signed-off-by: Torez Smith <torez@redhat.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1570190373-30684-7-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/xhci.c | 23 +++++++++++++++++++++--
 1 file changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index fe8f9ff58015..8c068d0cc7c1 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3095,6 +3095,7 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
 	unsigned int ep_index;
 	unsigned long flags;
 	u32 ep_flag;
+	int err;
 
 	xhci = hcd_to_xhci(hcd);
 	if (!host_ep->hcpriv)
@@ -3154,7 +3155,17 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
 		xhci_free_command(xhci, cfg_cmd);
 		goto cleanup;
 	}
-	xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id, ep_index, 0);
+
+	err = xhci_queue_stop_endpoint(xhci, stop_cmd, udev->slot_id,
+					ep_index, 0);
+	if (err < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_dbg(xhci, "%s: Failed to queue stop ep command, %d ",
+				__func__, err);
+		goto cleanup;
+	}
+
 	xhci_ring_cmd_db(xhci);
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
@@ -3168,8 +3179,16 @@ static void xhci_endpoint_reset(struct usb_hcd *hcd,
 					   ctrl_ctx, ep_flag, ep_flag);
 	xhci_endpoint_copy(xhci, cfg_cmd->in_ctx, vdev->out_ctx, ep_index);
 
-	xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma,
+	err = xhci_queue_configure_endpoint(xhci, cfg_cmd, cfg_cmd->in_ctx->dma,
 				      udev->slot_id, false);
+	if (err < 0) {
+		spin_unlock_irqrestore(&xhci->lock, flags);
+		xhci_free_command(xhci, cfg_cmd);
+		xhci_dbg(xhci, "%s: Failed to queue config ep command, %d ",
+				__func__, err);
+		goto cleanup;
+	}
+
 	xhci_ring_cmd_db(xhci);
 	spin_unlock_irqrestore(&xhci->lock, flags);
 
-- 
2.23.0



                 reply	other threads:[~2019-10-04 12:33 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=157019238714363@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=William.Kuzeja@stratus.com \
    --cc=mathias.nyman@linux.intel.com \
    --cc=stable@vger.kernel.org \
    --cc=torez@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.