Re: [PATCH v4] misc: eeprom: at24: support pm_runtime control

[Bibby Hsieh <bibby.hsieh@mediatek.com>]

On Mon, 2019-10-21 at 18:53 +0200, Bartosz Golaszewski wrote:
> pt., 18 paź 2019 o 10:26 Bibby Hsieh <bibby.hsieh@mediatek.com> napisał(a):
> >
> > Although in the most platforms, the power of eeprom and i2c
> > are alway on, some platforms disable the eeprom and i2c power
> > in order to meet low power request.
> > This patch add the pm_runtime ops to control power to support
> > all platforms.
> >
> > Changes since v3:
> >  - remove redundant calling function
> >  - change SIMPLE_DEV_PM_OPS to SET_RUNTIME_PM_OPS
> >  - change supply name
> >
> > Changes since v2:
> >  - rebase onto v5.4-rc1
> >  - pm_runtime_disable and regulator_bulk_disable at
> >    err return in probe function
> >
> > Changes since v1:
> >  - remove redundant code
> >  - fixup coding style
> >
> > Signed-off-by: Bibby Hsieh <bibby.hsieh@mediatek.com>
> > ---
> >  drivers/misc/eeprom/at24.c | 64 ++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 64 insertions(+)
> >
> > diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
> > index 2cccd82a3106..68ced4f25916 100644
> > --- a/drivers/misc/eeprom/at24.c
> > +++ b/drivers/misc/eeprom/at24.c
> > @@ -22,6 +22,7 @@
> >  #include <linux/nvmem-provider.h>
> >  #include <linux/regmap.h>
> >  #include <linux/pm_runtime.h>
> > +#include <linux/regulator/consumer.h>
> >  #include <linux/gpio/consumer.h>
> >
> >  /* Address pointer is 16 bit. */
> > @@ -67,6 +68,12 @@
> >   * which won't work on pure SMBus systems.
> >   */
> >
> > +static const char * const at24_supply_names[] = {
> > +       "vcc", "i2c",
> > +};
> > +
> > +#define AT24_NUM_SUPPLIES ARRAY_SIZE(at24_supply_names)
> > +
> >  struct at24_client {
> >         struct i2c_client *client;
> >         struct regmap *regmap;
> > @@ -91,6 +98,8 @@ struct at24_data {
> >
> >         struct gpio_desc *wp_gpio;
> >
> > +       bool has_supplies;
> > +       struct regulator_bulk_data supplies[AT24_NUM_SUPPLIES];
> >         /*
> >          * Some chips tie up multiple I2C addresses; dummy devices reserve
> >          * them for us, and we'll use them with SMBus calls.
> > @@ -662,6 +671,17 @@ static int at24_probe(struct i2c_client *client)
> >         at24->client[0].client = client;
> >         at24->client[0].regmap = regmap;
> >
> > +       regulator_bulk_set_supply_names(at24->supplies,
> > +                                       at24_supply_names, AT24_NUM_SUPPLIES);
> > +       err =  devm_regulator_bulk_get(&at24->client[0].client->dev,
> > +                                      AT24_NUM_SUPPLIES, at24->supplies);
> > +       if (err == -ENODEV)
> > +               at24->has_supplies = NULL;
> 
> I just gave this a spin and noticed that this will never happen - the
> regulator core will use a dummy regulator if none is defined in DT.
> The only way for this to make sense would be to use
> regulator_get_optional() for each supply separately. But actually I
> think we should just leave it this way and remove this if. In the end:
> this chip needs some power supply, so dummy regulator makes sense.
> 
> Bart
OK, I will remove this if in next version.

Thanks for the experiment.:D

Bibby

> 
> > +       else if (err == 0)
> > +               at24->has_supplies = !err;
> > +       else
> > +               return err;
> > +
> >         at24->wp_gpio = devm_gpiod_get_optional(dev, "wp", GPIOD_OUT_HIGH);
> >         if (IS_ERR(at24->wp_gpio))
> >                 return PTR_ERR(at24->wp_gpio);
> > @@ -701,6 +721,14 @@ static int at24_probe(struct i2c_client *client)
> >
> >         i2c_set_clientdata(client, at24);
> >
> > +       if (at24->has_supplies) {
> > +               err = regulator_bulk_enable(AT24_NUM_SUPPLIES, at24->supplies);
> > +               if (err) {
> > +                       dev_err(dev, "Failed to enable power regulators\n");
> > +                       return err;
> > +               }
> > +       }
> > +
> >         /* enable runtime pm */
> >         pm_runtime_set_active(dev);
> >         pm_runtime_enable(dev);
> > @@ -713,6 +741,9 @@ static int at24_probe(struct i2c_client *client)
> >         pm_runtime_idle(dev);
> >         if (err) {
> >                 pm_runtime_disable(dev);
> > +               if (at24->has_supplies)
> > +                       regulator_bulk_disable(AT24_NUM_SUPPLIES,
> > +                                              at24->supplies);
> >                 return -ENODEV;
> >         }
> >
> > @@ -725,15 +756,48 @@ static int at24_probe(struct i2c_client *client)
> >
> >  static int at24_remove(struct i2c_client *client)
> >  {
> > +       struct at24_data *at24 = i2c_get_clientdata(client);
> > +
> >         pm_runtime_disable(&client->dev);
> >         pm_runtime_set_suspended(&client->dev);
> > +       if (at24->has_supplies)
> > +               regulator_bulk_disable(AT24_NUM_SUPPLIES, at24->supplies);
> > +
> > +       return 0;
> > +}
> > +
> > +static int __maybe_unused at24_suspend(struct device *dev)
> > +{
> > +       struct i2c_client *client = to_i2c_client(dev);
> > +       struct at24_data *at24 = i2c_get_clientdata(client);
> > +
> > +       if (at24->has_supplies)
> > +               return regulator_bulk_disable(AT24_NUM_SUPPLIES,
> > +                                             at24->supplies);
> > +
> > +       return 0;
> > +}
> > +
> > +static int __maybe_unused at24_resume(struct device *dev)
> > +{
> > +       struct i2c_client *client = to_i2c_client(dev);
> > +       struct at24_data *at24 = i2c_get_clientdata(client);
> > +
> > +       if (at24->has_supplies)
> > +               return regulator_bulk_enable(AT24_NUM_SUPPLIES,
> > +                                            at24->supplies);
> >
> >         return 0;
> >  }
> >
> > +static const struct dev_pm_ops at24_pm_ops = {
> > +       SET_RUNTIME_PM_OPS(at24_suspend, at24_resume, NULL)
> > +};
> > +
> >  static struct i2c_driver at24_driver = {
> >         .driver = {
> >                 .name = "at24",
> > +               .pm = &at24_pm_ops,
> >                 .of_match_table = at24_of_match,
> >                 .acpi_match_table = ACPI_PTR(at24_acpi_ids),
> >         },
> > --
> > 2.18.0
> >