All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: stern@rowland.harvard.edu, gregkh@linuxfoundation.org,
	hch@lst.de, oneukum@suse.com, stable@vger.kernel.org
Subject: patch "UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of" added to usb-linus
Date: Mon, 28 Oct 2019 17:55:04 +0100	[thread overview]
Message-ID: <157228170448175@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


From 1186f86a71130a7635a20843e355bb880c7349b2 Mon Sep 17 00:00:00 2001
From: Alan Stern <stern@rowland.harvard.edu>
Date: Wed, 23 Oct 2019 11:34:33 -0400
Subject: UAS: Revert commit 3ae62a42090f ("UAS: fix alignment of
 scatter/gather segments")

Commit 3ae62a42090f ("UAS: fix alignment of scatter/gather segments"),
copying a similar commit for usb-storage, attempted to solve a problem
involving scatter-gather I/O and USB/IP by setting the
virt_boundary_mask for mass-storage devices.

However, it now turns out that the analogous change in usb-storage
interacted badly with commit 09324d32d2a0 ("block: force an unlimited
segment size on queues with a virt boundary"), which was added later.
A typical error message is:

	ehci-pci 0000:00:13.2: swiotlb buffer is full (sz: 327680 bytes),
	total 32768 (slots), used 97 (slots)

There is no longer any reason to keep the virt_boundary_mask setting
in the uas driver.  It was needed in the first place only for
handling devices with a block size smaller than the maxpacket size and
where the host controller was not capable of fully general
scatter-gather operation (that is, able to merge two SG segments into
a single USB packet).  But:

	High-speed or slower connections never use a bulk maxpacket
	value larger than 512;

	The SCSI layer does not handle block devices with a block size
	smaller than 512 bytes;

	All the host controllers capable of SuperSpeed operation can
	handle fully general SG;

	Since commit ea44d190764b ("usbip: Implement SG support to
	vhci-hcd and stub driver") was merged, the USB/IP driver can
	also handle SG.

Therefore all supported device/controller combinations should be okay
with no need for any special virt_boundary_mask.  So in order to head
off potential problems similar to those affecting usb-storage, this
patch reverts commit 3ae62a42090f.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: Oliver Neukum <oneukum@suse.com>
CC: <stable@vger.kernel.org>
Acked-by: Christoph Hellwig <hch@lst.de>
Fixes: 3ae62a42090f ("UAS: fix alignment of scatter/gather segments")
Link: https://lore.kernel.org/r/Pine.LNX.4.44L0.1910231132470.1878-100000@iolanthe.rowland.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/storage/uas.c | 20 --------------------
 1 file changed, 20 deletions(-)

diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c
index bf80d6f81f58..34538253f12c 100644
--- a/drivers/usb/storage/uas.c
+++ b/drivers/usb/storage/uas.c
@@ -789,29 +789,9 @@ static int uas_slave_alloc(struct scsi_device *sdev)
 {
 	struct uas_dev_info *devinfo =
 		(struct uas_dev_info *)sdev->host->hostdata;
-	int maxp;
 
 	sdev->hostdata = devinfo;
 
-	/*
-	 * We have two requirements here. We must satisfy the requirements
-	 * of the physical HC and the demands of the protocol, as we
-	 * definitely want no additional memory allocation in this path
-	 * ruling out using bounce buffers.
-	 *
-	 * For a transmission on USB to continue we must never send
-	 * a package that is smaller than maxpacket. Hence the length of each
-         * scatterlist element except the last must be divisible by the
-         * Bulk maxpacket value.
-	 * If the HC does not ensure that through SG,
-	 * the upper layer must do that. We must assume nothing
-	 * about the capabilities off the HC, so we use the most
-	 * pessimistic requirement.
-	 */
-
-	maxp = usb_maxpacket(devinfo->udev, devinfo->data_in_pipe, 0);
-	blk_queue_virt_boundary(sdev->request_queue, maxp - 1);
-
 	/*
 	 * The protocol has no requirements on alignment in the strict sense.
 	 * Controllers may or may not have alignment restrictions.
-- 
2.23.0



                 reply	other threads:[~2019-10-28 16:55 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=157228170448175@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=hch@lst.de \
    --cc=oneukum@suse.com \
    --cc=stable@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.