From: <gregkh@linuxfoundation.org>
To: henryl@nvidia.com, gregkh@linuxfoundation.org,
mathias.nyman@linux.intel.com, stable@vger.kernel.org
Subject: patch "usb: xhci: only set D3hot for pci device" added to usb-linus
Date: Wed, 11 Dec 2019 15:33:10 +0100 [thread overview]
Message-ID: <157607479082136@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
usb: xhci: only set D3hot for pci device
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
From f2c710f7dca8457e88b4ac9de2060f011254f9dd Mon Sep 17 00:00:00 2001
From: Henry Lin <henryl@nvidia.com>
Date: Wed, 11 Dec 2019 16:20:04 +0200
Subject: usb: xhci: only set D3hot for pci device
Xhci driver cannot call pci_set_power_state() on non-pci xhci host
controllers. For example, NVIDIA Tegra XHCI host controller which acts
as platform device with XHCI_SPURIOUS_WAKEUP quirk set in some platform
hits this issue during shutdown.
Cc: <stable@vger.kernel.org>
Fixes: 638298dc66ea ("xhci: Fix spurious wakeups after S5 on Haswell")
Signed-off-by: Henry Lin <henryl@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20191211142007.8847-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/host/xhci-pci.c | 13 +++++++++++++
drivers/usb/host/xhci.c | 7 ++-----
drivers/usb/host/xhci.h | 1 +
3 files changed, 16 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index a0025d23b257..2907fe4d78dd 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -521,6 +521,18 @@ static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
}
#endif /* CONFIG_PM */
+static void xhci_pci_shutdown(struct usb_hcd *hcd)
+{
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ xhci_shutdown(hcd);
+
+ /* Yet another workaround for spurious wakeups at shutdown with HSW */
+ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
+ pci_set_power_state(pdev, PCI_D3hot);
+}
+
/*-------------------------------------------------------------------------*/
/* PCI driver selection metadata; PCI hotplugging uses this */
@@ -556,6 +568,7 @@ static int __init xhci_pci_init(void)
#ifdef CONFIG_PM
xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
+ xhci_pci_hc_driver.shutdown = xhci_pci_shutdown;
#endif
return pci_register_driver(&xhci_pci_driver);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6721d059f58a..c5ee562c4c74 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -770,7 +770,7 @@ static void xhci_stop(struct usb_hcd *hcd)
*
* This will only ever be called with the main usb_hcd (the USB3 roothub).
*/
-static void xhci_shutdown(struct usb_hcd *hcd)
+void xhci_shutdown(struct usb_hcd *hcd)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
@@ -789,11 +789,8 @@ static void xhci_shutdown(struct usb_hcd *hcd)
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"xhci_shutdown completed - status = %x",
readl(&xhci->op_regs->status));
-
- /* Yet another workaround for spurious wakeups at shutdown with HSW */
- if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
- pci_set_power_state(to_pci_dev(hcd->self.sysdev), PCI_D3hot);
}
+EXPORT_SYMBOL_GPL(xhci_shutdown);
#ifdef CONFIG_PM
static void xhci_save_registers(struct xhci_hcd *xhci)
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index dc6f62a4b197..13d8838cd552 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -2050,6 +2050,7 @@ int xhci_start(struct xhci_hcd *xhci);
int xhci_reset(struct xhci_hcd *xhci);
int xhci_run(struct usb_hcd *hcd);
int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
+void xhci_shutdown(struct usb_hcd *hcd);
void xhci_init_driver(struct hc_driver *drv,
const struct xhci_driver_overrides *over);
int xhci_disable_slot(struct xhci_hcd *xhci, u32 slot_id);
--
2.24.1
reply other threads:[~2019-12-11 14:33 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=157607479082136@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=henryl@nvidia.com \
--cc=mathias.nyman@linux.intel.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.