From: <gregkh@linuxfoundation.org>
To: johan@kernel.org, gregkh@linuxfoundation.org,
stable@vger.kernel.org, stern@rowland.harvard.edu
Subject: patch "USB: core: fix check for duplicate endpoints" added to usb-linus
Date: Mon, 30 Dec 2019 20:02:18 +0100 [thread overview]
Message-ID: <1577732538224254@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
USB: core: fix check for duplicate endpoints
to my usb git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
From 3e4f8e21c4f27bcf30a48486b9dcc269512b79ff Mon Sep 17 00:00:00 2001
From: Johan Hovold <johan@kernel.org>
Date: Thu, 19 Dec 2019 17:10:16 +0100
Subject: USB: core: fix check for duplicate endpoints
Amend the endpoint-descriptor sanity checks to detect all duplicate
endpoint addresses in a configuration.
Commit 0a8fd1346254 ("USB: fix problems with duplicate endpoint
addresses") added a check for duplicate endpoint addresses within a
single alternate setting, but did not look for duplicate addresses in
other interfaces.
The current check would also not detect all duplicate addresses when one
endpoint is as a (bi-directional) control endpoint.
This specifically avoids overwriting the endpoint entries in struct
usb_device when enabling a duplicate endpoint, something which could
potentially lead to crashes or leaks, for example, when endpoints are
later disabled.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20191219161016.6695-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/usb/core/config.c | 70 ++++++++++++++++++++++++++++++++-------
1 file changed, 58 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 5f40117e68e7..21291950cc97 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -203,9 +203,58 @@ static const unsigned short super_speed_maxpacket_maxes[4] = {
[USB_ENDPOINT_XFER_INT] = 1024,
};
-static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
- int asnum, struct usb_host_interface *ifp, int num_ep,
- unsigned char *buffer, int size)
+static bool endpoint_is_duplicate(struct usb_endpoint_descriptor *e1,
+ struct usb_endpoint_descriptor *e2)
+{
+ if (e1->bEndpointAddress == e2->bEndpointAddress)
+ return true;
+
+ if (usb_endpoint_xfer_control(e1) || usb_endpoint_xfer_control(e2)) {
+ if (usb_endpoint_num(e1) == usb_endpoint_num(e2))
+ return true;
+ }
+
+ return false;
+}
+
+/*
+ * Check for duplicate endpoint addresses in other interfaces and in the
+ * altsetting currently being parsed.
+ */
+static bool config_endpoint_is_duplicate(struct usb_host_config *config,
+ int inum, int asnum, struct usb_endpoint_descriptor *d)
+{
+ struct usb_endpoint_descriptor *epd;
+ struct usb_interface_cache *intfc;
+ struct usb_host_interface *alt;
+ int i, j, k;
+
+ for (i = 0; i < config->desc.bNumInterfaces; ++i) {
+ intfc = config->intf_cache[i];
+
+ for (j = 0; j < intfc->num_altsetting; ++j) {
+ alt = &intfc->altsetting[j];
+
+ if (alt->desc.bInterfaceNumber == inum &&
+ alt->desc.bAlternateSetting != asnum)
+ continue;
+
+ for (k = 0; k < alt->desc.bNumEndpoints; ++k) {
+ epd = &alt->endpoint[k].desc;
+
+ if (endpoint_is_duplicate(epd, d))
+ return true;
+ }
+ }
+ }
+
+ return false;
+}
+
+static int usb_parse_endpoint(struct device *ddev, int cfgno,
+ struct usb_host_config *config, int inum, int asnum,
+ struct usb_host_interface *ifp, int num_ep,
+ unsigned char *buffer, int size)
{
unsigned char *buffer0 = buffer;
struct usb_endpoint_descriptor *d;
@@ -242,13 +291,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
goto skip_to_next_endpoint_or_interface_descriptor;
/* Check for duplicate endpoint addresses */
- for (i = 0; i < ifp->desc.bNumEndpoints; ++i) {
- if (ifp->endpoint[i].desc.bEndpointAddress ==
- d->bEndpointAddress) {
- dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
- cfgno, inum, asnum, d->bEndpointAddress);
- goto skip_to_next_endpoint_or_interface_descriptor;
- }
+ if (config_endpoint_is_duplicate(config, inum, asnum, d)) {
+ dev_warn(ddev, "config %d interface %d altsetting %d has a duplicate endpoint with address 0x%X, skipping\n",
+ cfgno, inum, asnum, d->bEndpointAddress);
+ goto skip_to_next_endpoint_or_interface_descriptor;
}
endpoint = &ifp->endpoint[ifp->desc.bNumEndpoints];
@@ -522,8 +568,8 @@ static int usb_parse_interface(struct device *ddev, int cfgno,
if (((struct usb_descriptor_header *) buffer)->bDescriptorType
== USB_DT_INTERFACE)
break;
- retval = usb_parse_endpoint(ddev, cfgno, inum, asnum, alt,
- num_ep, buffer, size);
+ retval = usb_parse_endpoint(ddev, cfgno, config, inum, asnum,
+ alt, num_ep, buffer, size);
if (retval < 0)
return retval;
++n;
--
2.24.1
reply other threads:[~2019-12-30 19:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1577732538224254@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=stable@vger.kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.