From: Elliot Berman <eberman@codeaurora.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
agross@kernel.org, swboyd@chromium.org,
Stephan Gerhold <stephan@gerhold.net>
Cc: Elliot Berman <eberman@codeaurora.org>,
saiprakash.ranjan@codeaurora.org, tsoni@codeaurora.org,
sidgup@codeaurora.org, psodagud@codeaurora.org,
Brian Masney <masneyb@onstation.org>,
linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v5 16/17] firmware: qcom_scm: Remove thin wrappers
Date: Tue, 7 Jan 2020 13:04:25 -0800 [thread overview]
Message-ID: <1578431066-19600-17-git-send-email-eberman@codeaurora.org> (raw)
In-Reply-To: <1578431066-19600-1-git-send-email-eberman@codeaurora.org>
qcom_scm-32 and qcom_scm-64 implementations are nearly identical, so
make qcom_scm_call and qcom_scm_call_atomic unique to each and the SCM
descriptor creation common to each. There are the following catches:
- __qcom_scm_is_call_available is still in each -32,-64 implementation
as the argument is unique to each convention
- For some functions, only one implementation was provided in -32 or
-64. The actual implementation was moved into qcom_scm.c
- io_writel and io_readl in -64 were non-atomic calls and in -32 they
were. Atomic is the better option, so use it.
Change-Id: Iecc28c4a7afef2fc39c7da207c8f53f27447727e
Tested-by: Brian Masney <masneyb@onstation.org> # arm32
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
---
drivers/firmware/qcom_scm-32.c | 461 +----------------------------------------
drivers/firmware/qcom_scm-64.c | 434 +-------------------------------------
drivers/firmware/qcom_scm.c | 394 ++++++++++++++++++++++++++++++++---
drivers/firmware/qcom_scm.h | 87 ++++----
4 files changed, 428 insertions(+), 948 deletions(-)
diff --git a/drivers/firmware/qcom_scm-32.c b/drivers/firmware/qcom_scm-32.c
index e9b396c..08220e7 100644
--- a/drivers/firmware/qcom_scm-32.c
+++ b/drivers/firmware/qcom_scm-32.c
@@ -15,75 +15,8 @@
#include "qcom_scm.h"
-#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
-#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
-#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
-#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
-
-#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
-#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
-#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
-#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
-
-struct qcom_scm_entry {
- int flag;
- void *entry;
-};
-
-static struct qcom_scm_entry qcom_scm_wb[] = {
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
- { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
-};
-
static DEFINE_MUTEX(qcom_scm_lock);
-#define MAX_QCOM_SCM_ARGS 10
-#define MAX_QCOM_SCM_RETS 3
-
-enum qcom_scm_arg_types {
- QCOM_SCM_VAL,
- QCOM_SCM_RO,
- QCOM_SCM_RW,
- QCOM_SCM_BUFVAL,
-};
-
-#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
- (((a) & 0x3) << 4) | \
- (((b) & 0x3) << 6) | \
- (((c) & 0x3) << 8) | \
- (((d) & 0x3) << 10) | \
- (((e) & 0x3) << 12) | \
- (((f) & 0x3) << 14) | \
- (((g) & 0x3) << 16) | \
- (((h) & 0x3) << 18) | \
- (((i) & 0x3) << 20) | \
- (((j) & 0x3) << 22) | \
- ((num) & 0xf))
-
-#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
-
-/**
- * struct qcom_scm_desc
- * @arginfo: Metadata describing the arguments in args[]
- * @args: The array of arguments for the secure syscall
- */
-struct qcom_scm_desc {
- u32 svc;
- u32 cmd;
- u32 arginfo;
- u64 args[MAX_QCOM_SCM_ARGS];
- u32 owner;
-};
-
-/**
- * struct qcom_scm_res
- * @result: The values returned by the secure syscall
- */
-struct qcom_scm_res {
- u64 result[MAX_QCOM_SCM_RETS];
-};
/**
* struct arm_smccc_args
@@ -196,7 +129,7 @@ static void __scm_legacy_do(const struct arm_smccc_args *smc,
* and response buffers is taken care of by qcom_scm_call; however, callers are
* responsible for any other cached buffers passed over to the secure world.
*/
-static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
+int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
struct qcom_scm_res *res)
{
u8 arglen = desc->arginfo & 0xf;
@@ -285,9 +218,9 @@ static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
* This shall only be used with commands that are guaranteed to be
* uninterruptable, atomic and SMP safe.
*/
-static int qcom_scm_call_atomic(struct device *unused,
- const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res)
+int qcom_scm_call_atomic(struct device *unused,
+ const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
{
int context_id;
struct arm_smccc_res smc_res;
@@ -309,113 +242,6 @@ static int qcom_scm_call_atomic(struct device *unused,
return smc_res.a0;
}
-/**
- * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
- *
- * Set the cold boot address of the cpus. Any cpu outside the supported
- * range would be removed from the cpu present mask.
- */
-int __qcom_scm_set_cold_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus)
-{
- int flags = 0;
- int cpu;
- int scm_cb_flags[] = {
- QCOM_SCM_FLAG_COLDBOOT_CPU0,
- QCOM_SCM_FLAG_COLDBOOT_CPU1,
- QCOM_SCM_FLAG_COLDBOOT_CPU2,
- QCOM_SCM_FLAG_COLDBOOT_CPU3,
- };
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_ADDR,
- };
-
- if (!cpus || (cpus && cpumask_empty(cpus)))
- return -EINVAL;
-
- for_each_cpu(cpu, cpus) {
- if (cpu < ARRAY_SIZE(scm_cb_flags))
- flags |= scm_cb_flags[cpu];
- else
- set_cpu_present(cpu, false);
- }
-
- desc.args[0] = flags;
- desc.args[1] = virt_to_phys(entry);
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call_atomic(dev, &desc, NULL);
-}
-
-/**
- * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
- *
- * Set the Linux entry point for the SCM to transfer control to when coming
- * out of a power down. CPU power down may be executed on cpuidle or hotplug.
- */
-int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus)
-{
- int ret;
- int flags = 0;
- int cpu;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_ADDR,
- };
-
- /*
- * Reassign only if we are switching from hotplug entry point
- * to cpuidle entry point or vice versa.
- */
- for_each_cpu(cpu, cpus) {
- if (entry == qcom_scm_wb[cpu].entry)
- continue;
- flags |= qcom_scm_wb[cpu].flag;
- }
-
- /* No change in entry function */
- if (!flags)
- return 0;
-
- desc.args[0] = flags;
- desc.args[1] = virt_to_phys(entry);
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, NULL);
- if (!ret) {
- for_each_cpu(cpu, cpus)
- qcom_scm_wb[cpu].entry = entry;
- }
-
- return ret;
-}
-
-/**
- * qcom_scm_cpu_power_down() - Power down the cpu
- * @flags - Flags to flush cache
- *
- * This is an end point to power down cpu. If there was a pending interrupt,
- * the control would return from this function, otherwise, the cpu jumps to the
- * warm boot entry point set for this cpu upon reset.
- */
-void __qcom_scm_cpu_power_down(struct device *dev, u32 flags)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_TERMINATE_PC,
- .args[0] = flags & QCOM_SCM_FLUSH_FLAG_MASK,
- .arginfo = QCOM_SCM_ARGS(1),
- };
-
- qcom_scm_call_atomic(dev, &desc, NULL);
-}
-
int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
{
int ret;
@@ -432,285 +258,6 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
return ret ? : res.result[0];
}
-int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
- u32 req_cnt, u32 *resp)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_HDCP,
- .cmd = QCOM_SCM_HDCP_INVOKE,
- };
- struct qcom_scm_res res;
-
- if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
- return -ERANGE;
-
- desc.args[0] = req[0].addr;
- desc.args[1] = req[0].val;
- desc.args[2] = req[1].addr;
- desc.args[3] = req[1].val;
- desc.args[4] = req[2].addr;
- desc.args[5] = req[2].val;
- desc.args[6] = req[3].addr;
- desc.args[7] = req[3].val;
- desc.args[8] = req[4].addr;
- desc.args[9] = req[4].val;
- desc.arginfo = QCOM_SCM_ARGS(10);
-
- ret = qcom_scm_call(dev, &desc, &res);
- *resp = res.result[0];
-
- return ret;
-}
-
-int __qcom_scm_ocmem_lock(struct device *dev, u32 id, u32 offset, u32 size,
- u32 mode)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_OCMEM,
- .cmd = QCOM_SCM_OCMEM_LOCK_CMD,
- };
-
- desc.args[0] = id;
- desc.args[1] = offset;
- desc.args[2] = size;
- desc.args[3] = mode;
- desc.arginfo = QCOM_SCM_ARGS(4);
-
- return qcom_scm_call(dev, &desc, NULL);
-}
-
-int __qcom_scm_ocmem_unlock(struct device *dev, u32 id, u32 offset, u32 size)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_OCMEM,
- .cmd = QCOM_SCM_OCMEM_UNLOCK_CMD,
- };
-
- desc.args[0] = id;
- desc.args[1] = offset;
- desc.args[2] = size;
- desc.arginfo = QCOM_SCM_ARGS(3);
-
- return qcom_scm_call(dev, &desc, NULL);
-}
-
void __qcom_scm_init(void)
{
}
-
-bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? false : !!res.result[0];
-}
-
-int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
- dma_addr_t metadata_phys)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.args[1] = metadata_phys;
- desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
- phys_addr_t addr, phys_addr_t size)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.args[1] = addr;
- desc.args[2] = size;
- desc.arginfo = QCOM_SCM_ARGS(3);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_MSS_RESET,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = reset;
- desc.args[1] = 0;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
- };
-
- desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE;
- desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call_atomic(dev, &desc, NULL);
-}
-
-int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = state;
- desc.args[1] = id;
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
- size_t mem_sz, phys_addr_t src, size_t src_sz,
- phys_addr_t dest, size_t dest_sz)
-{
- return -ENODEV;
-}
-
-int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
- u32 spare)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_MP,
- .cmd = QCOM_SCM_MP_RESTORE_SEC_CFG,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = device_id;
- desc.args[1] = spare;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
- size_t *size)
-{
- return -ENODEV;
-}
-
-int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
- u32 spare)
-{
- return -ENODEV;
-}
-
-int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
- unsigned int *val)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_IO,
- .cmd = QCOM_SCM_IO_READ,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = addr;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call_atomic(dev, &desc, &res);
- if (ret >= 0)
- *val = res.result[0];
-
- return ret < 0 ? ret : 0;
-}
-
-int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_IO,
- .cmd = QCOM_SCM_IO_WRITE,
- };
-
- desc.args[0] = addr;
- desc.args[1] = val;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call_atomic(dev, &desc, NULL);
-}
-
-int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool enable)
-{
- return -ENODEV;
-}
diff --git a/drivers/firmware/qcom_scm-64.c b/drivers/firmware/qcom_scm-64.c
index 9507047..4defc7c 100644
--- a/drivers/firmware/qcom_scm-64.c
+++ b/drivers/firmware/qcom_scm-64.c
@@ -16,52 +16,6 @@
#define SCM_SMC_FNID(s, c) ((((s) & 0xFF) << 8) | ((c) & 0xFF))
-#define MAX_QCOM_SCM_ARGS 10
-#define MAX_QCOM_SCM_RETS 3
-
-enum qcom_scm_arg_types {
- QCOM_SCM_VAL,
- QCOM_SCM_RO,
- QCOM_SCM_RW,
- QCOM_SCM_BUFVAL,
-};
-
-#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
- (((a) & 0x3) << 4) | \
- (((b) & 0x3) << 6) | \
- (((c) & 0x3) << 8) | \
- (((d) & 0x3) << 10) | \
- (((e) & 0x3) << 12) | \
- (((f) & 0x3) << 14) | \
- (((g) & 0x3) << 16) | \
- (((h) & 0x3) << 18) | \
- (((i) & 0x3) << 20) | \
- (((j) & 0x3) << 22) | \
- ((num) & 0xf))
-
-#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
-
-/**
- * struct qcom_scm_desc
- * @arginfo: Metadata describing the arguments in args[]
- * @args: The array of arguments for the secure syscall
- */
-struct qcom_scm_desc {
- u32 svc;
- u32 cmd;
- u32 arginfo;
- u64 args[MAX_QCOM_SCM_ARGS];
- u32 owner;
-};
-
-/**
- * struct qcom_scm_res
- * @result: The values returned by the secure syscall
- */
-struct qcom_scm_res {
- u64 result[MAX_QCOM_SCM_RETS];
-};
-
/**
* struct arm_smccc_args
* @args: The array of values used in registers in smc instruction
@@ -206,8 +160,8 @@ static int __scm_smc_call(struct device *dev, const struct qcom_scm_desc *desc,
* Sends a command to the SCM and waits for the command to finish processing.
* This should *only* be called in pre-emptible context.
*/
-static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res)
+int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
{
might_sleep();
return __scm_smc_call(dev, desc, res, false);
@@ -224,54 +178,12 @@ static int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
* Sends a command to the SCM and waits for the command to finish processing.
* This can be called in atomic context.
*/
-static int qcom_scm_call_atomic(struct device *dev,
- const struct qcom_scm_desc *desc,
- struct qcom_scm_res *res)
+int qcom_scm_call_atomic(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res)
{
return __scm_smc_call(dev, desc, res, true);
}
-/**
- * qcom_scm_set_cold_boot_addr() - Set the cold boot address for cpus
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
- *
- * Set the cold boot address of the cpus. Any cpu outside the supported
- * range would be removed from the cpu present mask.
- */
-int __qcom_scm_set_cold_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus)
-{
- return -ENOTSUPP;
-}
-
-/**
- * qcom_scm_set_warm_boot_addr() - Set the warm boot address for cpus
- * @dev: Device pointer
- * @entry: Entry point function for the cpus
- * @cpus: The cpumask of cpus that will use the entry point
- *
- * Set the Linux entry point for the SCM to transfer control to when coming
- * out of a power down. CPU power down may be executed on cpuidle or hotplug.
- */
-int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus)
-{
- return -ENOTSUPP;
-}
-
-/**
- * qcom_scm_cpu_power_down() - Power down the cpu
- * @flags - Flags to flush cache
- *
- * This is an end point to power down cpu. If there was a pending interrupt,
- * the control would return from this function, otherwise, the cpu jumps to the
- * warm boot entry point set for this cpu upon reset.
- */
-void __qcom_scm_cpu_power_down(struct device *dev, u32 flags)
-{
-}
-
int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
{
int ret;
@@ -291,50 +203,6 @@ int __qcom_scm_is_call_available(struct device *dev, u32 svc_id, u32 cmd_id)
return ret ? : res.result[0];
}
-int __qcom_scm_hdcp_req(struct device *dev, struct qcom_scm_hdcp_req *req,
- u32 req_cnt, u32 *resp)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_HDCP,
- .cmd = QCOM_SCM_HDCP_INVOKE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
- return -ERANGE;
-
- desc.args[0] = req[0].addr;
- desc.args[1] = req[0].val;
- desc.args[2] = req[1].addr;
- desc.args[3] = req[1].val;
- desc.args[4] = req[2].addr;
- desc.args[5] = req[2].val;
- desc.args[6] = req[3].addr;
- desc.args[7] = req[3].val;
- desc.args[8] = req[4].addr;
- desc.args[9] = req[4].val;
- desc.arginfo = QCOM_SCM_ARGS(10);
-
- ret = qcom_scm_call(dev, &desc, &res);
- *resp = res.result[0];
-
- return ret;
-}
-
-int __qcom_scm_ocmem_lock(struct device *dev, uint32_t id, uint32_t offset,
- uint32_t size, uint32_t mode)
-{
- return -ENOTSUPP;
-}
-
-int __qcom_scm_ocmem_unlock(struct device *dev, uint32_t id, uint32_t offset,
- uint32_t size)
-{
- return -ENOTSUPP;
-}
-
void __qcom_scm_init(void)
{
struct qcom_scm_desc desc = {
@@ -366,297 +234,3 @@ void __qcom_scm_init(void)
out:
pr_info("QCOM SCM SMC Convention: %lld\n", qcom_smccc_convention);
}
-
-bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? false : !!res.result[0];
-}
-
-int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
- dma_addr_t metadata_phys)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.args[1] = metadata_phys;
- desc.arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
- phys_addr_t addr, phys_addr_t size)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.args[1] = addr;
- desc.args[2] = size;
- desc.arginfo = QCOM_SCM_ARGS(3);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = peripheral;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_PIL,
- .cmd = QCOM_SCM_PIL_PAS_MSS_RESET,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = reset;
- desc.args[1] = 0;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = state;
- desc.args[1] = id;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
- size_t mem_sz, phys_addr_t src, size_t src_sz,
- phys_addr_t dest, size_t dest_sz)
-{
- int ret;
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_MP,
- .cmd = QCOM_SCM_MP_ASSIGN,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
-
- desc.args[0] = mem_region;
- desc.args[1] = mem_sz;
- desc.args[2] = src;
- desc.args[3] = src_sz;
- desc.args[4] = dest;
- desc.args[5] = dest_sz;
- desc.args[6] = 0;
-
- desc.arginfo = QCOM_SCM_ARGS(7, QCOM_SCM_RO, QCOM_SCM_VAL,
- QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO,
- QCOM_SCM_VAL, QCOM_SCM_VAL);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id, u32 spare)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_MP,
- .cmd = QCOM_SCM_MP_RESTORE_SEC_CFG,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = device_id;
- desc.args[1] = spare;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- return ret ? : res.result[0];
-}
-
-int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
- size_t *size)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_MP,
- .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = spare;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
-
- if (size)
- *size = res.result[0];
-
- return ret ? : res.result[1];
-}
-
-int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr, u32 size,
- u32 spare)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_MP,
- .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- int ret;
-
- desc.args[0] = addr;
- desc.args[1] = size;
- desc.args[2] = spare;
- desc.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
- QCOM_SCM_VAL);
-
- ret = qcom_scm_call(dev, &desc, NULL);
-
- /* the pg table has been initialized already, ignore the error */
- if (ret == -EPERM)
- ret = 0;
-
- return ret;
-}
-
-int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_BOOT,
- .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- desc.args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE;
- desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call(dev, &desc, NULL);
-}
-
-int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr,
- unsigned int *val)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_IO,
- .cmd = QCOM_SCM_IO_READ,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
- struct qcom_scm_res res;
- int ret;
-
- desc.args[0] = addr;
- desc.arginfo = QCOM_SCM_ARGS(1);
-
- ret = qcom_scm_call(dev, &desc, &res);
- if (ret >= 0)
- *val = res.result[0];
-
- return ret < 0 ? ret : 0;
-}
-
-int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_IO,
- .cmd = QCOM_SCM_IO_WRITE,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- desc.args[0] = addr;
- desc.args[1] = val;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call(dev, &desc, NULL);
-}
-
-int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev, bool en)
-{
- struct qcom_scm_desc desc = {
- .svc = QCOM_SCM_SVC_SMMU_PROGRAM,
- .cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1,
- .owner = ARM_SMCCC_OWNER_SIP,
- };
-
- desc.args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL;
- desc.args[1] = en;
- desc.arginfo = QCOM_SCM_ARGS(2);
-
- return qcom_scm_call_atomic(dev, &desc, NULL);
-}
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 5ba4c85..895f148 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -16,6 +16,7 @@
#include <linux/of_platform.h>
#include <linux/clk.h>
#include <linux/reset-controller.h>
+#include <linux/arm-smccc.h>
#include "qcom_scm.h"
@@ -49,6 +50,28 @@ struct qcom_scm_mem_map_info {
__le64 mem_size;
};
+#define QCOM_SCM_FLAG_COLDBOOT_CPU0 0x00
+#define QCOM_SCM_FLAG_COLDBOOT_CPU1 0x01
+#define QCOM_SCM_FLAG_COLDBOOT_CPU2 0x08
+#define QCOM_SCM_FLAG_COLDBOOT_CPU3 0x20
+
+#define QCOM_SCM_FLAG_WARMBOOT_CPU0 0x04
+#define QCOM_SCM_FLAG_WARMBOOT_CPU1 0x02
+#define QCOM_SCM_FLAG_WARMBOOT_CPU2 0x10
+#define QCOM_SCM_FLAG_WARMBOOT_CPU3 0x40
+
+struct qcom_scm_wb_entry {
+ int flag;
+ void *entry;
+};
+
+static struct qcom_scm_wb_entry qcom_scm_wb[] = {
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU0 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU1 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU2 },
+ { .flag = QCOM_SCM_FLAG_WARMBOOT_CPU3 },
+};
+
static struct qcom_scm *__scm;
static int qcom_scm_clk_enable(void)
@@ -94,7 +117,39 @@ static void qcom_scm_clk_disable(void)
*/
int qcom_scm_set_warm_boot_addr(void *entry, const cpumask_t *cpus)
{
- return __qcom_scm_set_warm_boot_addr(__scm->dev, entry, cpus);
+ int ret;
+ int flags = 0;
+ int cpu;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_ADDR,
+ .arginfo = QCOM_SCM_ARGS(2),
+ };
+
+ /*
+ * Reassign only if we are switching from hotplug entry point
+ * to cpuidle entry point or vice versa.
+ */
+ for_each_cpu(cpu, cpus) {
+ if (entry == qcom_scm_wb[cpu].entry)
+ continue;
+ flags |= qcom_scm_wb[cpu].flag;
+ }
+
+ /* No change in entry function */
+ if (!flags)
+ return 0;
+
+ desc.args[0] = flags;
+ desc.args[1] = virt_to_phys(entry);
+
+ ret = qcom_scm_call(__scm->dev, &desc, NULL);
+ if (!ret) {
+ for_each_cpu(cpu, cpus)
+ qcom_scm_wb[cpu].entry = entry;
+ }
+
+ return ret;
}
EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
@@ -108,8 +163,35 @@ EXPORT_SYMBOL(qcom_scm_set_warm_boot_addr);
*/
int qcom_scm_set_cold_boot_addr(void *entry, const cpumask_t *cpus)
{
- return __qcom_scm_set_cold_boot_addr(__scm ? __scm->dev : NULL, entry,
- cpus);
+ int flags = 0;
+ int cpu;
+ int scm_cb_flags[] = {
+ QCOM_SCM_FLAG_COLDBOOT_CPU0,
+ QCOM_SCM_FLAG_COLDBOOT_CPU1,
+ QCOM_SCM_FLAG_COLDBOOT_CPU2,
+ QCOM_SCM_FLAG_COLDBOOT_CPU3,
+ };
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_ADDR,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ if (!cpus || (cpus && cpumask_empty(cpus)))
+ return -EINVAL;
+
+ for_each_cpu(cpu, cpus) {
+ if (cpu < ARRAY_SIZE(scm_cb_flags))
+ flags |= scm_cb_flags[cpu];
+ else
+ set_cpu_present(cpu, false);
+ }
+
+ desc.args[0] = flags;
+ desc.args[1] = virt_to_phys(entry);
+
+ return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
@@ -123,16 +205,52 @@ EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr);
*/
void qcom_scm_cpu_power_down(u32 flags)
{
- __qcom_scm_cpu_power_down(__scm ? __scm->dev : NULL, flags);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_TERMINATE_PC,
+ .args[0] = flags & QCOM_SCM_FLUSH_FLAG_MASK,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_cpu_power_down);
int qcom_scm_set_remote_state(u32 state, u32 id)
{
- return __qcom_scm_set_remote_state(__scm->dev, state, id);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_REMOTE_STATE,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = state,
+ .args[1] = id,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+ int ret;
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_set_remote_state);
+static int __qcom_scm_set_dload_mode(struct device *dev, bool enable)
+{
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_BOOT,
+ .cmd = QCOM_SCM_BOOT_SET_DLOAD_MODE,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = QCOM_SCM_BOOT_SET_DLOAD_MODE,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+ desc.args[1] = enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0;
+
+ return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+
static void qcom_scm_set_download_mode(bool enable)
{
bool avail;
@@ -144,8 +262,8 @@ static void qcom_scm_set_download_mode(bool enable)
if (avail) {
ret = __qcom_scm_set_dload_mode(__scm->dev, enable);
} else if (__scm->dload_mode_addr) {
- ret = __qcom_scm_io_writel(__scm->dev, __scm->dload_mode_addr,
- enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
+ ret = qcom_scm_io_writel(__scm->dload_mode_addr,
+ enable ? QCOM_SCM_BOOT_SET_DLOAD_MODE : 0);
} else {
dev_err(__scm->dev,
"No available mechanism for setting download mode\n");
@@ -172,6 +290,14 @@ int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size)
dma_addr_t mdata_phys;
void *mdata_buf;
int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_INIT_IMAGE,
+ .arginfo = QCOM_SCM_ARGS(2, QCOM_SCM_VAL, QCOM_SCM_RW),
+ .args[0] = peripheral,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
/*
* During the scm call memory protection will be enabled for the meta
@@ -190,14 +316,16 @@ int qcom_scm_pas_init_image(u32 peripheral, const void *metadata, size_t size)
if (ret)
goto free_metadata;
- ret = __qcom_scm_pas_init_image(__scm->dev, peripheral, mdata_phys);
+ desc.args[1] = mdata_phys;
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
qcom_scm_clk_disable();
free_metadata:
dma_free_coherent(__scm->dev, size, mdata_buf, mdata_phys);
- return ret;
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_init_image);
@@ -213,15 +341,25 @@ EXPORT_SYMBOL(qcom_scm_pas_init_image);
int qcom_scm_pas_mem_setup(u32 peripheral, phys_addr_t addr, phys_addr_t size)
{
int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_MEM_SETUP,
+ .arginfo = QCOM_SCM_ARGS(3),
+ .args[0] = peripheral,
+ .args[1] = addr,
+ .args[2] = size,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
ret = qcom_scm_clk_enable();
if (ret)
return ret;
- ret = __qcom_scm_pas_mem_setup(__scm->dev, peripheral, addr, size);
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
qcom_scm_clk_disable();
- return ret;
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_mem_setup);
@@ -235,15 +373,23 @@ EXPORT_SYMBOL(qcom_scm_pas_mem_setup);
int qcom_scm_pas_auth_and_reset(u32 peripheral)
{
int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_AUTH_AND_RESET,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .args[0] = peripheral,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
ret = qcom_scm_clk_enable();
if (ret)
return ret;
- ret = __qcom_scm_pas_auth_and_reset(__scm->dev, peripheral);
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
qcom_scm_clk_disable();
- return ret;
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset);
@@ -256,15 +402,24 @@ EXPORT_SYMBOL(qcom_scm_pas_auth_and_reset);
int qcom_scm_pas_shutdown(u32 peripheral)
{
int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_SHUTDOWN,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .args[0] = peripheral,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
ret = qcom_scm_clk_enable();
if (ret)
return ret;
- ret = __qcom_scm_pas_shutdown(__scm->dev, peripheral);
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
qcom_scm_clk_disable();
- return ret;
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_shutdown);
@@ -278,16 +433,44 @@ EXPORT_SYMBOL(qcom_scm_pas_shutdown);
bool qcom_scm_pas_supported(u32 peripheral)
{
int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_IS_SUPPORTED,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .args[0] = peripheral,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
ret = __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_PIL,
QCOM_SCM_PIL_PAS_IS_SUPPORTED);
if (ret <= 0)
return false;
- return __qcom_scm_pas_supported(__scm->dev, peripheral);
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+ return ret ? false : !!res.result[0];
}
EXPORT_SYMBOL(qcom_scm_pas_supported);
+static int __qcom_scm_pas_mss_reset(struct device *dev, bool reset)
+{
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_PIL,
+ .cmd = QCOM_SCM_PIL_PAS_MSS_RESET,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = reset,
+ .args[1] = 0,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+ int ret;
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+ return ret ? : res.result[0];
+}
+
static int qcom_scm_pas_reset_assert(struct reset_controller_dev *rcdev,
unsigned long idx)
{
@@ -313,13 +496,38 @@ static const struct reset_control_ops qcom_scm_pas_reset_ops = {
int qcom_scm_io_readl(phys_addr_t addr, unsigned int *val)
{
- return __qcom_scm_io_readl(__scm->dev, addr, val);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_IO,
+ .cmd = QCOM_SCM_IO_READ,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .args[0] = addr,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+ int ret;
+
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+ if (ret >= 0)
+ *val = res.result[0];
+
+ return ret < 0 ? ret : 0;
}
EXPORT_SYMBOL(qcom_scm_io_readl);
int qcom_scm_io_writel(phys_addr_t addr, unsigned int val)
{
- return __qcom_scm_io_writel(__scm->dev, addr, val);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_IO,
+ .cmd = QCOM_SCM_IO_WRITE,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = addr,
+ .args[1] = val,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+
+ return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_io_writel);
@@ -338,22 +546,101 @@ EXPORT_SYMBOL(qcom_scm_restore_sec_cfg_available);
int qcom_scm_restore_sec_cfg(u32 device_id, u32 spare)
{
- return __qcom_scm_restore_sec_cfg(__scm->dev, device_id, spare);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_RESTORE_SEC_CFG,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = device_id,
+ .args[1] = spare,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+ int ret;
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+ return ret ? : res.result[0];
}
EXPORT_SYMBOL(qcom_scm_restore_sec_cfg);
int qcom_scm_iommu_secure_ptbl_size(u32 spare, size_t *size)
{
- return __qcom_scm_iommu_secure_ptbl_size(__scm->dev, spare, size);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE,
+ .arginfo = QCOM_SCM_ARGS(1),
+ .args[0] = spare,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+ int ret;
+
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+
+ if (size)
+ *size = res.result[0];
+
+ return ret ? : res.result[1];
}
EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_size);
int qcom_scm_iommu_secure_ptbl_init(u64 addr, u32 size, u32 spare)
{
- return __qcom_scm_iommu_secure_ptbl_init(__scm->dev, addr, size, spare);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT,
+ .arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
+ QCOM_SCM_VAL),
+ .args[0] = addr,
+ .args[1] = size,
+ .args[2] = spare,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ int ret;
+
+ desc.args[0] = addr;
+ desc.args[1] = size;
+ desc.args[2] = spare;
+ desc.arginfo = QCOM_SCM_ARGS(3, QCOM_SCM_RW, QCOM_SCM_VAL,
+ QCOM_SCM_VAL);
+
+ ret = qcom_scm_call(__scm->dev, &desc, NULL);
+
+ /* the pg table has been initialized already, ignore the error */
+ if (ret == -EPERM)
+ ret = 0;
+
+ return ret;
}
EXPORT_SYMBOL(qcom_scm_iommu_secure_ptbl_init);
+static int __qcom_scm_assign_mem(struct device *dev, phys_addr_t mem_region,
+ size_t mem_sz, phys_addr_t src, size_t src_sz,
+ phys_addr_t dest, size_t dest_sz)
+{
+ int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_MP,
+ .cmd = QCOM_SCM_MP_ASSIGN,
+ .arginfo = QCOM_SCM_ARGS(7, QCOM_SCM_RO, QCOM_SCM_VAL,
+ QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_RO,
+ QCOM_SCM_VAL, QCOM_SCM_VAL),
+ .args[0] = mem_region,
+ .args[1] = mem_sz,
+ .args[2] = src,
+ .args[3] = src_sz,
+ .args[4] = dest,
+ .args[5] = dest_sz,
+ .args[6] = 0,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+
+ ret = qcom_scm_call(dev, &desc, &res);
+
+ return ret ? : res.result[0];
+}
+
/**
* qcom_scm_assign_mem() - Make a secure call to reassign memory ownership
* @mem_addr: mem region whose ownership need to be reassigned
@@ -458,7 +745,17 @@ EXPORT_SYMBOL(qcom_scm_ocmem_lock_available);
int qcom_scm_ocmem_lock(enum qcom_scm_ocmem_client id, u32 offset, u32 size,
u32 mode)
{
- return __qcom_scm_ocmem_lock(__scm->dev, id, offset, size, mode);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_OCMEM,
+ .cmd = QCOM_SCM_OCMEM_LOCK_CMD,
+ .args[0] = id,
+ .args[1] = offset,
+ .args[2] = size,
+ .args[3] = mode,
+ .arginfo = QCOM_SCM_ARGS(4),
+ };
+
+ return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_ocmem_lock);
@@ -472,7 +769,16 @@ EXPORT_SYMBOL(qcom_scm_ocmem_lock);
*/
int qcom_scm_ocmem_unlock(enum qcom_scm_ocmem_client id, u32 offset, u32 size)
{
- return __qcom_scm_ocmem_unlock(__scm->dev, id, offset, size);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_OCMEM,
+ .cmd = QCOM_SCM_OCMEM_UNLOCK_CMD,
+ .args[0] = id,
+ .args[1] = offset,
+ .args[2] = size,
+ .arginfo = QCOM_SCM_ARGS(3),
+ };
+
+ return qcom_scm_call(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_ocmem_unlock);
@@ -507,20 +813,56 @@ EXPORT_SYMBOL(qcom_scm_hdcp_available);
*/
int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp)
{
- int ret = qcom_scm_clk_enable();
+ int ret;
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_HDCP,
+ .cmd = QCOM_SCM_HDCP_INVOKE,
+ .arginfo = QCOM_SCM_ARGS(10),
+ .args = {
+ req[0].addr,
+ req[0].val,
+ req[1].addr,
+ req[1].val,
+ req[2].addr,
+ req[2].val,
+ req[3].addr,
+ req[3].val,
+ req[4].addr,
+ req[4].val
+ },
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+ struct qcom_scm_res res;
+
+ if (req_cnt > QCOM_SCM_HDCP_MAX_REQ_CNT)
+ return -ERANGE;
+ ret = qcom_scm_clk_enable();
if (ret)
return ret;
- ret = __qcom_scm_hdcp_req(__scm->dev, req, req_cnt, resp);
+ ret = qcom_scm_call(__scm->dev, &desc, &res);
+ *resp = res.result[0];
+
qcom_scm_clk_disable();
+
return ret;
}
EXPORT_SYMBOL(qcom_scm_hdcp_req);
int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
{
- return __qcom_scm_qsmmu500_wait_safe_toggle(__scm->dev, en);
+ struct qcom_scm_desc desc = {
+ .svc = QCOM_SCM_SVC_SMMU_PROGRAM,
+ .cmd = QCOM_SCM_SMMU_CONFIG_ERRATA1,
+ .arginfo = QCOM_SCM_ARGS(2),
+ .args[0] = QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL,
+ .args[1] = en,
+ .owner = ARM_SMCCC_OWNER_SIP,
+ };
+
+
+ return qcom_scm_call_atomic(__scm->dev, &desc, NULL);
}
EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 56ace3b..9b7b357 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -3,19 +3,64 @@
*/
#ifndef __QCOM_SCM_INT_H
#define __QCOM_SCM_INT_H
+#define MAX_QCOM_SCM_ARGS 10
+#define MAX_QCOM_SCM_RETS 3
+
+enum qcom_scm_arg_types {
+ QCOM_SCM_VAL,
+ QCOM_SCM_RO,
+ QCOM_SCM_RW,
+ QCOM_SCM_BUFVAL,
+};
+
+#define QCOM_SCM_ARGS_IMPL(num, a, b, c, d, e, f, g, h, i, j, ...) (\
+ (((a) & 0x3) << 4) | \
+ (((b) & 0x3) << 6) | \
+ (((c) & 0x3) << 8) | \
+ (((d) & 0x3) << 10) | \
+ (((e) & 0x3) << 12) | \
+ (((f) & 0x3) << 14) | \
+ (((g) & 0x3) << 16) | \
+ (((h) & 0x3) << 18) | \
+ (((i) & 0x3) << 20) | \
+ (((j) & 0x3) << 22) | \
+ ((num) & 0xf))
+
+#define QCOM_SCM_ARGS(...) QCOM_SCM_ARGS_IMPL(__VA_ARGS__, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
+
+
+/**
+ * struct qcom_scm_desc
+ * @arginfo: Metadata describing the arguments in args[]
+ * @args: The array of arguments for the secure syscall
+ */
+struct qcom_scm_desc {
+ u32 svc;
+ u32 cmd;
+ u32 arginfo;
+ u64 args[MAX_QCOM_SCM_ARGS];
+ u32 owner;
+};
+
+/**
+ * struct qcom_scm_res
+ * @result: The values returned by the secure syscall
+ */
+struct qcom_scm_res {
+ u64 result[MAX_QCOM_SCM_RETS];
+};
+
+extern int qcom_scm_call(struct device *dev, const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res);
+extern int qcom_scm_call_atomic(struct device *dev,
+ const struct qcom_scm_desc *desc,
+ struct qcom_scm_res *res);
#define QCOM_SCM_SVC_BOOT 0x01
#define QCOM_SCM_BOOT_SET_ADDR 0x01
#define QCOM_SCM_BOOT_TERMINATE_PC 0x02
#define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10
#define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a
-extern int __qcom_scm_set_warm_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus);
-extern int __qcom_scm_set_cold_boot_addr(struct device *dev, void *entry,
- const cpumask_t *cpus);
-extern void __qcom_scm_cpu_power_down(struct device *dev, u32 flags);
-extern int __qcom_scm_set_remote_state(struct device *dev, u32 state, u32 id);
-extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
#define QCOM_SCM_FLUSH_FLAG_MASK 0x3
#define QCOM_SCM_SVC_PIL 0x02
@@ -25,20 +70,10 @@ extern int __qcom_scm_set_dload_mode(struct device *dev, bool enable);
#define QCOM_SCM_PIL_PAS_SHUTDOWN 0x06
#define QCOM_SCM_PIL_PAS_IS_SUPPORTED 0x07
#define QCOM_SCM_PIL_PAS_MSS_RESET 0x0a
-extern bool __qcom_scm_pas_supported(struct device *dev, u32 peripheral);
-extern int __qcom_scm_pas_init_image(struct device *dev, u32 peripheral,
- dma_addr_t metadata_phys);
-extern int __qcom_scm_pas_mem_setup(struct device *dev, u32 peripheral,
- phys_addr_t addr, phys_addr_t size);
-extern int __qcom_scm_pas_auth_and_reset(struct device *dev, u32 peripheral);
-extern int __qcom_scm_pas_shutdown(struct device *dev, u32 peripheral);
-extern int __qcom_scm_pas_mss_reset(struct device *dev, bool reset);
#define QCOM_SCM_SVC_IO 0x05
#define QCOM_SCM_IO_READ 0x01
#define QCOM_SCM_IO_WRITE 0x02
-extern int __qcom_scm_io_readl(struct device *dev, phys_addr_t addr, unsigned int *val);
-extern int __qcom_scm_io_writel(struct device *dev, phys_addr_t addr, unsigned int val);
#define QCOM_SCM_SVC_INFO 0x06
#define QCOM_SCM_INFO_IS_CALL_AVAIL 0x01
@@ -50,35 +85,17 @@ extern int __qcom_scm_is_call_available(struct device *dev, u32 svc_id,
#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_SIZE 0x03
#define QCOM_SCM_MP_IOMMU_SECURE_PTBL_INIT 0x04
#define QCOM_SCM_MP_ASSIGN 0x16
-extern int __qcom_scm_restore_sec_cfg(struct device *dev, u32 device_id,
- u32 spare);
-extern int __qcom_scm_iommu_secure_ptbl_size(struct device *dev, u32 spare,
- size_t *size);
-extern int __qcom_scm_iommu_secure_ptbl_init(struct device *dev, u64 addr,
- u32 size, u32 spare);
-extern int __qcom_scm_assign_mem(struct device *dev,
- phys_addr_t mem_region, size_t mem_sz,
- phys_addr_t src, size_t src_sz,
- phys_addr_t dest, size_t dest_sz);
#define QCOM_SCM_SVC_OCMEM 0x0f
#define QCOM_SCM_OCMEM_LOCK_CMD 0x01
#define QCOM_SCM_OCMEM_UNLOCK_CMD 0x02
-extern int __qcom_scm_ocmem_lock(struct device *dev, u32 id, u32 offset,
- u32 size, u32 mode);
-extern int __qcom_scm_ocmem_unlock(struct device *dev, u32 id, u32 offset,
- u32 size);
#define QCOM_SCM_SVC_HDCP 0x11
#define QCOM_SCM_HDCP_INVOKE 0x01
-extern int __qcom_scm_hdcp_req(struct device *dev,
- struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp);
#define QCOM_SCM_SVC_SMMU_PROGRAM 0x15
#define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x03
#define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x02
-extern int __qcom_scm_qsmmu500_wait_safe_toggle(struct device *dev,
- bool enable);
extern void __qcom_scm_init(void);
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2020-01-07 21:18 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-07 21:04 [PATCH v5 00/17] Restructure, improve target support for qcom_scm driver Elliot Berman
2020-01-07 21:04 ` [PATCH v5 01/17] firmware: qcom_scm: Rename macros and structures Elliot Berman
2020-01-07 21:04 ` [PATCH v5 02/17] firmware: qcom_scm: Apply consistent naming scheme to command IDs Elliot Berman
2020-01-07 21:04 ` [PATCH v5 03/17] firmware: qcom_scm: Remove unused qcom_scm_get_version Elliot Berman
2020-01-07 21:04 ` [PATCH v5 04/17] firmware: qcom_scm-64: Make SMC macros less magical Elliot Berman
2020-01-07 21:04 ` [PATCH v5 05/17] firmware: qcom_scm-64: Move svc/cmd/owner into qcom_scm_desc Elliot Berman
2020-01-07 21:04 ` [PATCH v5 06/17] firmware: qcom_scm-64: Add SCM results struct Elliot Berman
2020-01-07 21:04 ` [PATCH v5 07/17] firmware: qcom_scm-64: Move SMC register filling to qcom_scm_call_smccc Elliot Berman
2020-01-07 21:04 ` [PATCH v5 08/17] firmware: qcom_scm-64: Improve SMC convention detection Elliot Berman
2020-01-07 21:04 ` [PATCH v5 09/17] firmware: qcom_scm-32: Use SMC arch wrappers Elliot Berman
2020-01-07 21:04 ` [PATCH v5 10/17] firmware: qcom_scm-32: Add funcnum IDs Elliot Berman
2020-01-07 21:04 ` [PATCH v5 11/17] firmware: qcom_scm-32: Use qcom_scm_desc in non-atomic calls Elliot Berman
2020-01-07 21:04 ` [PATCH v5 12/17] firmware: qcom_scm-32: Move SMCCC register filling to qcom_scm_call Elliot Berman
2020-01-07 21:04 ` [PATCH v5 13/17] firmware: qcom_scm-32: Create common legacy atomic call Elliot Berman
2020-01-07 21:04 ` [PATCH v5 14/17] firmware: qcom_scm-32: Add device argument to atomic calls Elliot Berman
2020-01-07 21:04 ` [PATCH v5 15/17] firmware: qcom_scm: Order functions, definitions by service/command Elliot Berman
2020-01-07 21:04 ` Elliot Berman [this message]
2020-01-07 21:04 ` [PATCH v5 17/17] firmware: qcom_scm: Dynamically support SMCCC and legacy conventions Elliot Berman
2020-01-08 7:02 ` Stephen Boyd
2020-01-08 6:42 ` [PATCH v5 00/17] Restructure, improve target support for qcom_scm driver Bjorn Andersson
2020-01-08 6:54 ` Stephen Boyd
2020-01-08 7:21 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1578431066-19600-17-git-send-email-eberman@codeaurora.org \
--to=eberman@codeaurora.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=masneyb@onstation.org \
--cc=psodagud@codeaurora.org \
--cc=saiprakash.ranjan@codeaurora.org \
--cc=sidgup@codeaurora.org \
--cc=stephan@gerhold.net \
--cc=swboyd@chromium.org \
--cc=tsoni@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.