From: <gregkh@linuxfoundation.org>
To: alexander@tsoy.me, stable@vger.kernel.org, tiwai@suse.de,
toszlanyi@yahoo.de
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] ALSA: usb-audio: Add clock validity quirk for Denon" failed to apply to 4.19-stable tree
Date: Mon, 17 Feb 2020 12:50:17 +0100 [thread overview]
Message-ID: <1581940217141140@kroah.com> (raw)
The patch below does not apply to the 4.19-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 9f35a31283775e6f6af73fb2c95c686a4c0acac7 Mon Sep 17 00:00:00 2001
From: Alexander Tsoy <alexander@tsoy.me>
Date: Thu, 13 Feb 2020 02:54:50 +0300
Subject: [PATCH] ALSA: usb-audio: Add clock validity quirk for Denon
MC7000/MCX8000
It should be safe to ignore clock validity check result if the following
conditions are met:
- only one single sample rate is supported;
- the terminal is directly connected to the clock source;
- the clock type is internal.
This is to deal with some Denon DJ controllers that always reports that
clock is invalid.
Tested-by: Tobias Oszlanyi <toszlanyi@yahoo.de>
Signed-off-by: Alexander Tsoy <alexander@tsoy.me>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20200212235450.697348-1-alexander@tsoy.me
Signed-off-by: Takashi Iwai <tiwai@suse.de>
diff --git a/sound/usb/clock.c b/sound/usb/clock.c
index 018b1ecb5404..a48313dfa967 100644
--- a/sound/usb/clock.c
+++ b/sound/usb/clock.c
@@ -151,8 +151,34 @@ static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_i
return ret;
}
+/*
+ * Assume the clock is valid if clock source supports only one single sample
+ * rate, the terminal is connected directly to it (there is no clock selector)
+ * and clock type is internal. This is to deal with some Denon DJ controllers
+ * that always reports that clock is invalid.
+ */
+static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip,
+ struct audioformat *fmt,
+ int source_id)
+{
+ if (fmt->protocol == UAC_VERSION_2) {
+ struct uac_clock_source_descriptor *cs_desc =
+ snd_usb_find_clock_source(chip->ctrl_intf, source_id);
+
+ if (!cs_desc)
+ return false;
+
+ return (fmt->nr_rates == 1 &&
+ (fmt->clock & 0xff) == cs_desc->bClockID &&
+ (cs_desc->bmAttributes & 0x3) !=
+ UAC_CLOCK_SOURCE_TYPE_EXT);
+ }
+
+ return false;
+}
+
static bool uac_clock_source_is_valid(struct snd_usb_audio *chip,
- int protocol,
+ struct audioformat *fmt,
int source_id)
{
int err;
@@ -160,7 +186,7 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip,
struct usb_device *dev = chip->dev;
u32 bmControls;
- if (protocol == UAC_VERSION_3) {
+ if (fmt->protocol == UAC_VERSION_3) {
struct uac3_clock_source_descriptor *cs_desc =
snd_usb_find_clock_source_v3(chip->ctrl_intf, source_id);
@@ -194,10 +220,14 @@ static bool uac_clock_source_is_valid(struct snd_usb_audio *chip,
return false;
}
- return data ? true : false;
+ if (data)
+ return true;
+ else
+ return uac_clock_source_is_valid_quirk(chip, fmt, source_id);
}
-static int __uac_clock_find_source(struct snd_usb_audio *chip, int entity_id,
+static int __uac_clock_find_source(struct snd_usb_audio *chip,
+ struct audioformat *fmt, int entity_id,
unsigned long *visited, bool validate)
{
struct uac_clock_source_descriptor *source;
@@ -217,7 +247,7 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, int entity_id,
source = snd_usb_find_clock_source(chip->ctrl_intf, entity_id);
if (source) {
entity_id = source->bClockID;
- if (validate && !uac_clock_source_is_valid(chip, UAC_VERSION_2,
+ if (validate && !uac_clock_source_is_valid(chip, fmt,
entity_id)) {
usb_audio_err(chip,
"clock source %d is not valid, cannot use\n",
@@ -248,8 +278,9 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, int entity_id,
}
cur = ret;
- ret = __uac_clock_find_source(chip, selector->baCSourceID[ret - 1],
- visited, validate);
+ ret = __uac_clock_find_source(chip, fmt,
+ selector->baCSourceID[ret - 1],
+ visited, validate);
if (!validate || ret > 0 || !chip->autoclock)
return ret;
@@ -260,8 +291,9 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, int entity_id,
if (i == cur)
continue;
- ret = __uac_clock_find_source(chip, selector->baCSourceID[i - 1],
- visited, true);
+ ret = __uac_clock_find_source(chip, fmt,
+ selector->baCSourceID[i - 1],
+ visited, true);
if (ret < 0)
continue;
@@ -281,14 +313,16 @@ static int __uac_clock_find_source(struct snd_usb_audio *chip, int entity_id,
/* FIXME: multipliers only act as pass-thru element for now */
multiplier = snd_usb_find_clock_multiplier(chip->ctrl_intf, entity_id);
if (multiplier)
- return __uac_clock_find_source(chip, multiplier->bCSourceID,
- visited, validate);
+ return __uac_clock_find_source(chip, fmt,
+ multiplier->bCSourceID,
+ visited, validate);
return -EINVAL;
}
-static int __uac3_clock_find_source(struct snd_usb_audio *chip, int entity_id,
- unsigned long *visited, bool validate)
+static int __uac3_clock_find_source(struct snd_usb_audio *chip,
+ struct audioformat *fmt, int entity_id,
+ unsigned long *visited, bool validate)
{
struct uac3_clock_source_descriptor *source;
struct uac3_clock_selector_descriptor *selector;
@@ -307,7 +341,7 @@ static int __uac3_clock_find_source(struct snd_usb_audio *chip, int entity_id,
source = snd_usb_find_clock_source_v3(chip->ctrl_intf, entity_id);
if (source) {
entity_id = source->bClockID;
- if (validate && !uac_clock_source_is_valid(chip, UAC_VERSION_3,
+ if (validate && !uac_clock_source_is_valid(chip, fmt,
entity_id)) {
usb_audio_err(chip,
"clock source %d is not valid, cannot use\n",
@@ -338,7 +372,8 @@ static int __uac3_clock_find_source(struct snd_usb_audio *chip, int entity_id,
}
cur = ret;
- ret = __uac3_clock_find_source(chip, selector->baCSourceID[ret - 1],
+ ret = __uac3_clock_find_source(chip, fmt,
+ selector->baCSourceID[ret - 1],
visited, validate);
if (!validate || ret > 0 || !chip->autoclock)
return ret;
@@ -350,8 +385,9 @@ static int __uac3_clock_find_source(struct snd_usb_audio *chip, int entity_id,
if (i == cur)
continue;
- ret = __uac3_clock_find_source(chip, selector->baCSourceID[i - 1],
- visited, true);
+ ret = __uac3_clock_find_source(chip, fmt,
+ selector->baCSourceID[i - 1],
+ visited, true);
if (ret < 0)
continue;
@@ -372,7 +408,8 @@ static int __uac3_clock_find_source(struct snd_usb_audio *chip, int entity_id,
multiplier = snd_usb_find_clock_multiplier_v3(chip->ctrl_intf,
entity_id);
if (multiplier)
- return __uac3_clock_find_source(chip, multiplier->bCSourceID,
+ return __uac3_clock_find_source(chip, fmt,
+ multiplier->bCSourceID,
visited, validate);
return -EINVAL;
@@ -389,18 +426,18 @@ static int __uac3_clock_find_source(struct snd_usb_audio *chip, int entity_id,
*
* Returns the clock source UnitID (>=0) on success, or an error.
*/
-int snd_usb_clock_find_source(struct snd_usb_audio *chip, int protocol,
- int entity_id, bool validate)
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+ struct audioformat *fmt, bool validate)
{
DECLARE_BITMAP(visited, 256);
memset(visited, 0, sizeof(visited));
- switch (protocol) {
+ switch (fmt->protocol) {
case UAC_VERSION_2:
- return __uac_clock_find_source(chip, entity_id, visited,
+ return __uac_clock_find_source(chip, fmt, fmt->clock, visited,
validate);
case UAC_VERSION_3:
- return __uac3_clock_find_source(chip, entity_id, visited,
+ return __uac3_clock_find_source(chip, fmt, fmt->clock, visited,
validate);
default:
return -EINVAL;
@@ -501,8 +538,7 @@ static int set_sample_rate_v2v3(struct snd_usb_audio *chip, int iface,
* automatic clock selection if the current clock is not
* valid.
*/
- clock = snd_usb_clock_find_source(chip, fmt->protocol,
- fmt->clock, true);
+ clock = snd_usb_clock_find_source(chip, fmt, true);
if (clock < 0) {
/* We did not find a valid clock, but that might be
* because the current sample rate does not match an
@@ -510,8 +546,7 @@ static int set_sample_rate_v2v3(struct snd_usb_audio *chip, int iface,
* and we will do another validation after setting the
* rate.
*/
- clock = snd_usb_clock_find_source(chip, fmt->protocol,
- fmt->clock, false);
+ clock = snd_usb_clock_find_source(chip, fmt, false);
if (clock < 0)
return clock;
}
@@ -577,7 +612,7 @@ static int set_sample_rate_v2v3(struct snd_usb_audio *chip, int iface,
validation:
/* validate clock after rate change */
- if (!uac_clock_source_is_valid(chip, fmt->protocol, clock))
+ if (!uac_clock_source_is_valid(chip, fmt, clock))
return -ENXIO;
return 0;
}
diff --git a/sound/usb/clock.h b/sound/usb/clock.h
index 076e31b79ee0..68df0fbe09d0 100644
--- a/sound/usb/clock.h
+++ b/sound/usb/clock.h
@@ -6,7 +6,7 @@ int snd_usb_init_sample_rate(struct snd_usb_audio *chip, int iface,
struct usb_host_interface *alts,
struct audioformat *fmt, int rate);
-int snd_usb_clock_find_source(struct snd_usb_audio *chip, int protocol,
- int entity_id, bool validate);
+int snd_usb_clock_find_source(struct snd_usb_audio *chip,
+ struct audioformat *fmt, bool validate);
#endif /* __USBAUDIO_CLOCK_H */
diff --git a/sound/usb/format.c b/sound/usb/format.c
index 50cb183958bf..9f5cb4ed3a0c 100644
--- a/sound/usb/format.c
+++ b/sound/usb/format.c
@@ -336,8 +336,7 @@ static int parse_audio_format_rates_v2v3(struct snd_usb_audio *chip,
struct usb_device *dev = chip->dev;
unsigned char tmp[2], *data;
int nr_triplets, data_size, ret = 0, ret_l6;
- int clock = snd_usb_clock_find_source(chip, fp->protocol,
- fp->clock, false);
+ int clock = snd_usb_clock_find_source(chip, fp, false);
if (clock < 0) {
dev_err(&dev->dev,
reply other threads:[~2020-02-17 11:50 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1581940217141140@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=alexander@tsoy.me \
--cc=stable@vger.kernel.org \
--cc=tiwai@suse.de \
--cc=toszlanyi@yahoo.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.