From: <gregkh@linuxfoundation.org>
To: michal.simek@xilinx.com, gregkh@linuxfoundation.org,
johan@kernel.org, stable@vger.kernel.org
Subject: patch "Revert "serial: uartps: Register own uart console and driver" added to tty-linus
Date: Thu, 16 Apr 2020 16:06:40 +0200 [thread overview]
Message-ID: <1587046000103236@kroah.com> (raw)
This is a note to let you know that I've just added the patch titled
Revert "serial: uartps: Register own uart console and driver
to my tty git tree which can be found at
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty.git
in the tty-linus branch.
The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)
The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.
If you have any questions about this process, please let me know.
From 18cc7ac8a28e28cd005c2475f52576cfe10cabfb Mon Sep 17 00:00:00 2001
From: Michal Simek <michal.simek@xilinx.com>
Date: Fri, 3 Apr 2020 11:24:36 +0200
Subject: Revert "serial: uartps: Register own uart console and driver
structures"
This reverts commit 024ca329bfb9a948f76eaff3243e21b7e70182f2.
As Johan says, this driver needs a lot more work and these changes are
only going in the wrong direction:
https://lkml.kernel.org/r/20190523091839.GC568@localhost
Reported-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1ee35667e36a8efddee381df5fe495ad65f4d15c.1585905873.git.michal.simek@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/tty/serial/xilinx_uartps.c | 95 +++++++++++++-----------------
1 file changed, 40 insertions(+), 55 deletions(-)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 41d9c2f188f0..ac137b6a1dc1 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -27,6 +27,7 @@
#define CDNS_UART_TTY_NAME "ttyPS"
#define CDNS_UART_NAME "xuartps"
#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
+#define CDNS_UART_MINOR 0 /* works best with devtmpfs */
#define CDNS_UART_NR_PORTS 16
#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
#define CDNS_UART_REGISTER_SPACE 0x1000
@@ -1132,6 +1133,8 @@ static const struct uart_ops cdns_uart_ops = {
#endif
};
+static struct uart_driver cdns_uart_uart_driver;
+
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/**
* cdns_uart_console_putchar - write the character to the FIFO buffer
@@ -1271,6 +1274,16 @@ static int cdns_uart_console_setup(struct console *co, char *options)
return uart_set_options(port, co, baud, parity, bits, flow);
}
+
+static struct console cdns_uart_console = {
+ .name = CDNS_UART_TTY_NAME,
+ .write = cdns_uart_console_write,
+ .device = uart_console_device,
+ .setup = cdns_uart_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
+ .data = &cdns_uart_uart_driver,
+};
#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
#ifdef CONFIG_PM_SLEEP
@@ -1402,6 +1415,9 @@ static const struct of_device_id cdns_uart_of_match[] = {
};
MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
+/* Temporary variable for storing number of instances */
+static int instances;
+
/**
* cdns_uart_probe - Platform driver probe
* @pdev: Pointer to the platform device structure
@@ -1415,11 +1431,6 @@ static int cdns_uart_probe(struct platform_device *pdev)
struct resource *res;
struct cdns_uart *cdns_uart_data;
const struct of_device_id *match;
- struct uart_driver *cdns_uart_uart_driver;
- char *driver_name;
-#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- struct console *cdns_uart_console;
-#endif
cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
GFP_KERNEL);
@@ -1429,12 +1440,6 @@ static int cdns_uart_probe(struct platform_device *pdev)
if (!port)
return -ENOMEM;
- cdns_uart_uart_driver = devm_kzalloc(&pdev->dev,
- sizeof(*cdns_uart_uart_driver),
- GFP_KERNEL);
- if (!cdns_uart_uart_driver)
- return -ENOMEM;
-
/* Look for a serialN alias */
id = of_alias_get_id(pdev->dev.of_node, "serial");
if (id < 0)
@@ -1445,50 +1450,25 @@ static int cdns_uart_probe(struct platform_device *pdev)
return -ENODEV;
}
- /* There is a need to use unique driver name */
- driver_name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%s%d",
- CDNS_UART_NAME, id);
- if (!driver_name)
- return -ENOMEM;
-
- cdns_uart_uart_driver->owner = THIS_MODULE;
- cdns_uart_uart_driver->driver_name = driver_name;
- cdns_uart_uart_driver->dev_name = CDNS_UART_TTY_NAME;
- cdns_uart_uart_driver->major = CDNS_UART_MAJOR;
- cdns_uart_uart_driver->minor = id;
- cdns_uart_uart_driver->nr = 1;
-
+ if (!cdns_uart_uart_driver.state) {
+ cdns_uart_uart_driver.owner = THIS_MODULE;
+ cdns_uart_uart_driver.driver_name = CDNS_UART_NAME;
+ cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME;
+ cdns_uart_uart_driver.major = CDNS_UART_MAJOR;
+ cdns_uart_uart_driver.minor = CDNS_UART_MINOR;
+ cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
- cdns_uart_console = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_console),
- GFP_KERNEL);
- if (!cdns_uart_console)
- return -ENOMEM;
-
- strncpy(cdns_uart_console->name, CDNS_UART_TTY_NAME,
- sizeof(cdns_uart_console->name));
- cdns_uart_console->index = id;
- cdns_uart_console->write = cdns_uart_console_write;
- cdns_uart_console->device = uart_console_device;
- cdns_uart_console->setup = cdns_uart_console_setup;
- cdns_uart_console->flags = CON_PRINTBUFFER;
- cdns_uart_console->data = cdns_uart_uart_driver;
- cdns_uart_uart_driver->cons = cdns_uart_console;
+ cdns_uart_uart_driver.cons = &cdns_uart_console;
#endif
- rc = uart_register_driver(cdns_uart_uart_driver);
- if (rc < 0) {
- dev_err(&pdev->dev, "Failed to register driver\n");
- return rc;
+ rc = uart_register_driver(&cdns_uart_uart_driver);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "Failed to register driver\n");
+ return rc;
+ }
}
- cdns_uart_data->cdns_uart_driver = cdns_uart_uart_driver;
-
- /*
- * Setting up proper name_base needs to be done after uart
- * registration because tty_driver structure is not filled.
- * name_base is 0 by default.
- */
- cdns_uart_uart_driver->tty_driver->name_base = id;
+ cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver;
match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
if (match && match->data) {
@@ -1566,6 +1546,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
port->ops = &cdns_uart_ops;
port->fifosize = CDNS_UART_FIFO_SIZE;
port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE);
+ port->line = id;
/*
* Register the port.
@@ -1597,7 +1578,7 @@ static int cdns_uart_probe(struct platform_device *pdev)
console_port = port;
#endif
- rc = uart_add_one_port(cdns_uart_uart_driver, port);
+ rc = uart_add_one_port(&cdns_uart_uart_driver, port);
if (rc) {
dev_err(&pdev->dev,
"uart_add_one_port() failed; err=%i\n", rc);
@@ -1607,12 +1588,15 @@ static int cdns_uart_probe(struct platform_device *pdev)
#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
/* This is not port which is used for console that's why clean it up */
if (console_port == port &&
- !(cdns_uart_uart_driver->cons->flags & CON_ENABLED))
+ !(cdns_uart_uart_driver.cons->flags & CON_ENABLED))
console_port = NULL;
#endif
cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
"cts-override");
+
+ instances++;
+
return 0;
err_out_pm_disable:
@@ -1628,8 +1612,8 @@ static int cdns_uart_probe(struct platform_device *pdev)
err_out_clk_dis_pclk:
clk_disable_unprepare(cdns_uart_data->pclk);
err_out_unregister_driver:
- uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
-
+ if (!instances)
+ uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
return rc;
}
@@ -1664,7 +1648,8 @@ static int cdns_uart_remove(struct platform_device *pdev)
console_port = NULL;
#endif
- uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
+ if (!--instances)
+ uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
return rc;
}
--
2.26.1
reply other threads:[~2020-04-16 14:07 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1587046000103236@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=johan@kernel.org \
--cc=michal.simek@xilinx.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.