From: <gregkh@linuxfoundation.org>
To: gcwilson@linux.ibm.com, jarkko.sakkinen@linux.intel.com,
phaml@us.ibm.com, stefanb@linux.ibm.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] tpm: ibmvtpm: retry on H_CLOSED in tpm_ibmvtpm_send()" failed to apply to 4.4-stable tree
Date: Mon, 27 Apr 2020 17:18:20 +0200 [thread overview]
Message-ID: <1588000700181236@kroah.com> (raw)
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From eba5cf3dcb844c82f54d4a857e124824e252206d Mon Sep 17 00:00:00 2001
From: George Wilson <gcwilson@linux.ibm.com>
Date: Thu, 19 Mar 2020 23:27:58 -0400
Subject: [PATCH] tpm: ibmvtpm: retry on H_CLOSED in tpm_ibmvtpm_send()
tpm_ibmvtpm_send() can fail during PowerVM Live Partition Mobility resume
with an H_CLOSED return from ibmvtpm_send_crq(). The PAPR says, 'The
"partner partition suspended" transport event disables the associated CRQ
such that any H_SEND_CRQ hcall() to the associated CRQ returns H_Closed
until the CRQ has been explicitly enabled using the H_ENABLE_CRQ hcall.'
This patch adds a check in tpm_ibmvtpm_send() for an H_CLOSED return from
ibmvtpm_send_crq() and in that case calls tpm_ibmvtpm_resume() and
retries the ibmvtpm_send_crq() once.
Cc: stable@vger.kernel.org # 3.7.x
Fixes: 132f76294744 ("drivers/char/tpm: Add new device driver to support IBM vTPM")
Reported-by: Linh Pham <phaml@us.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: George Wilson <gcwilson@linux.ibm.com>
Tested-by: Linh Pham <phaml@us.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
diff --git a/drivers/char/tpm/tpm_ibmvtpm.c b/drivers/char/tpm/tpm_ibmvtpm.c
index 1a49db9e108e..09fe45246b8c 100644
--- a/drivers/char/tpm/tpm_ibmvtpm.c
+++ b/drivers/char/tpm/tpm_ibmvtpm.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (C) 2012 IBM Corporation
+ * Copyright (C) 2012-2020 IBM Corporation
*
* Author: Ashley Lai <ashleydlai@gmail.com>
*
@@ -134,6 +134,64 @@ static int tpm_ibmvtpm_recv(struct tpm_chip *chip, u8 *buf, size_t count)
return len;
}
+/**
+ * ibmvtpm_crq_send_init - Send a CRQ initialize message
+ * @ibmvtpm: vtpm device struct
+ *
+ * Return:
+ * 0 on success.
+ * Non-zero on failure.
+ */
+static int ibmvtpm_crq_send_init(struct ibmvtpm_dev *ibmvtpm)
+{
+ int rc;
+
+ rc = ibmvtpm_send_crq_word(ibmvtpm->vdev, INIT_CRQ_CMD);
+ if (rc != H_SUCCESS)
+ dev_err(ibmvtpm->dev,
+ "%s failed rc=%d\n", __func__, rc);
+
+ return rc;
+}
+
+/**
+ * tpm_ibmvtpm_resume - Resume from suspend
+ *
+ * @dev: device struct
+ *
+ * Return: Always 0.
+ */
+static int tpm_ibmvtpm_resume(struct device *dev)
+{
+ struct tpm_chip *chip = dev_get_drvdata(dev);
+ struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+ int rc = 0;
+
+ do {
+ if (rc)
+ msleep(100);
+ rc = plpar_hcall_norets(H_ENABLE_CRQ,
+ ibmvtpm->vdev->unit_address);
+ } while (rc == H_IN_PROGRESS || rc == H_BUSY || H_IS_LONG_BUSY(rc));
+
+ if (rc) {
+ dev_err(dev, "Error enabling ibmvtpm rc=%d\n", rc);
+ return rc;
+ }
+
+ rc = vio_enable_interrupts(ibmvtpm->vdev);
+ if (rc) {
+ dev_err(dev, "Error vio_enable_interrupts rc=%d\n", rc);
+ return rc;
+ }
+
+ rc = ibmvtpm_crq_send_init(ibmvtpm);
+ if (rc)
+ dev_err(dev, "Error send_init rc=%d\n", rc);
+
+ return rc;
+}
+
/**
* tpm_ibmvtpm_send() - Send a TPM command
* @chip: tpm chip struct
@@ -147,6 +205,7 @@ static int tpm_ibmvtpm_recv(struct tpm_chip *chip, u8 *buf, size_t count)
static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
{
struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
+ bool retry = true;
int rc, sig;
if (!ibmvtpm->rtce_buf) {
@@ -180,18 +239,27 @@ static int tpm_ibmvtpm_send(struct tpm_chip *chip, u8 *buf, size_t count)
*/
ibmvtpm->tpm_processing_cmd = true;
+again:
rc = ibmvtpm_send_crq(ibmvtpm->vdev,
IBMVTPM_VALID_CMD, VTPM_TPM_COMMAND,
count, ibmvtpm->rtce_dma_handle);
if (rc != H_SUCCESS) {
+ /*
+ * H_CLOSED can be returned after LPM resume. Call
+ * tpm_ibmvtpm_resume() to re-enable the CRQ then retry
+ * ibmvtpm_send_crq() once before failing.
+ */
+ if (rc == H_CLOSED && retry) {
+ tpm_ibmvtpm_resume(ibmvtpm->dev);
+ retry = false;
+ goto again;
+ }
dev_err(ibmvtpm->dev, "tpm_ibmvtpm_send failed rc=%d\n", rc);
- rc = 0;
ibmvtpm->tpm_processing_cmd = false;
- } else
- rc = 0;
+ }
spin_unlock(&ibmvtpm->rtce_lock);
- return rc;
+ return 0;
}
static void tpm_ibmvtpm_cancel(struct tpm_chip *chip)
@@ -269,26 +337,6 @@ static int ibmvtpm_crq_send_init_complete(struct ibmvtpm_dev *ibmvtpm)
return rc;
}
-/**
- * ibmvtpm_crq_send_init - Send a CRQ initialize message
- * @ibmvtpm: vtpm device struct
- *
- * Return:
- * 0 on success.
- * Non-zero on failure.
- */
-static int ibmvtpm_crq_send_init(struct ibmvtpm_dev *ibmvtpm)
-{
- int rc;
-
- rc = ibmvtpm_send_crq_word(ibmvtpm->vdev, INIT_CRQ_CMD);
- if (rc != H_SUCCESS)
- dev_err(ibmvtpm->dev,
- "ibmvtpm_crq_send_init failed rc=%d\n", rc);
-
- return rc;
-}
-
/**
* tpm_ibmvtpm_remove - ibm vtpm remove entry point
* @vdev: vio device struct
@@ -401,44 +449,6 @@ static int ibmvtpm_reset_crq(struct ibmvtpm_dev *ibmvtpm)
ibmvtpm->crq_dma_handle, CRQ_RES_BUF_SIZE);
}
-/**
- * tpm_ibmvtpm_resume - Resume from suspend
- *
- * @dev: device struct
- *
- * Return: Always 0.
- */
-static int tpm_ibmvtpm_resume(struct device *dev)
-{
- struct tpm_chip *chip = dev_get_drvdata(dev);
- struct ibmvtpm_dev *ibmvtpm = dev_get_drvdata(&chip->dev);
- int rc = 0;
-
- do {
- if (rc)
- msleep(100);
- rc = plpar_hcall_norets(H_ENABLE_CRQ,
- ibmvtpm->vdev->unit_address);
- } while (rc == H_IN_PROGRESS || rc == H_BUSY || H_IS_LONG_BUSY(rc));
-
- if (rc) {
- dev_err(dev, "Error enabling ibmvtpm rc=%d\n", rc);
- return rc;
- }
-
- rc = vio_enable_interrupts(ibmvtpm->vdev);
- if (rc) {
- dev_err(dev, "Error vio_enable_interrupts rc=%d\n", rc);
- return rc;
- }
-
- rc = ibmvtpm_crq_send_init(ibmvtpm);
- if (rc)
- dev_err(dev, "Error send_init rc=%d\n", rc);
-
- return rc;
-}
-
static bool tpm_ibmvtpm_req_canceled(struct tpm_chip *chip, u8 status)
{
return (status == 0);
reply other threads:[~2020-04-27 15:18 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1588000700181236@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=gcwilson@linux.ibm.com \
--cc=jarkko.sakkinen@linux.intel.com \
--cc=phaml@us.ibm.com \
--cc=stable@vger.kernel.org \
--cc=stefanb@linux.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.