From: Amit Singh Tomar <amittomer25@gmail.com>
To: u-boot@lists.denx.de
Subject: [PATCH v1 0/7] add Ethernet support for S700
Date: Sat, 9 May 2020 19:55:08 +0530 [thread overview]
Message-ID: <1589034315-19722-1-git-send-email-amittomer25@gmail.com> (raw)
This series adds Ethernet Support Actions Semi OWL S700 SoC.
First patch(1/7) series adds Ethernet clock for S900 and S700, S900
part is just compiled tested.
Patches(from 2/7 and 3/7) adds support for RTL 8201F PHY module and
introduce configuration option "RTL8201F_PHY_S700_RMII_TIMINGS" to
fulfil specific timing requirements for S700.
Patches(from 4/21 to 7/21) are there to enable Ethenet support in S700, MAC
is based on Designware IP.
These patches re-uses the existing driver(drivers/net/designware.c) and
programs SoC specific bits to enable ethernet. SoC specific glue code is
kept in dwmac_s700.c file, did it this way as found it more cleaner but
having done that I am not really sure, if it's bit of a overkill to have
it place in glue code or we can keep this glue code somewhere in machine
file ?
Series is tested on Cubieboard7-lite by tftping all the images needed
to boot Linux.
Amit Singh Tomar (7):
clk: actions: Add Ethernet clocks
net: phy: realtek: Add support for RTL8201F PHY module.
net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust
rx/tx timings
net: designware: s700: Add glue code for S700 mac
arm: dts: s700: add node for ethernet controller
owl: Kconfig: Enable DM eth for OWL platform
configs: Enable mac and phy configs
arch/arm/Kconfig | 1 +
arch/arm/dts/s700-u-boot.dtsi | 13 ++++++
arch/arm/include/asm/arch-owl/regs_s700.h | 8 ++++
arch/arm/include/asm/arch-owl/regs_s900.h | 4 ++
configs/cubieboard7_defconfig | 4 ++
drivers/clk/owl/clk_owl.c | 9 +++++
drivers/clk/owl/clk_owl.h | 2 -
drivers/net/Kconfig | 7 ++++
drivers/net/Makefile | 1 +
drivers/net/dwmac_s700.c | 66 +++++++++++++++++++++++++++++++
drivers/net/phy/Kconfig | 9 +++++
drivers/net/phy/realtek.c | 55 ++++++++++++++++++++++++++
12 files changed, 177 insertions(+), 2 deletions(-)
create mode 100644 drivers/net/dwmac_s700.c
--
2.7.4
next reply other threads:[~2020-05-09 14:25 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-09 14:25 Amit Singh Tomar [this message]
2020-05-09 14:25 ` [PATCH v1 1/7] clk: actions: Add Ethernet clocks Amit Singh Tomar
2020-07-08 3:02 ` Tom Rini
2020-05-09 14:25 ` [PATCH v1 2/7] net: phy: realtek: Add support for RTL8201F PHY module Amit Singh Tomar
2020-07-08 3:02 ` Tom Rini
2020-05-09 14:25 ` [PATCH v1 3/7] net: phy: realtek: Introduce PHY_RTL8201F_S700_RMII_TIMINGS to adjust rx/tx timings Amit Singh Tomar
2020-07-08 3:02 ` Tom Rini
2020-05-09 14:25 ` [PATCH v1 4/7] net: designware: s700: Add glue code for S700 mac Amit Singh Tomar
2020-07-08 3:03 ` Tom Rini
2020-05-09 14:25 ` [PATCH v1 5/7] arm: dts: s700: add node for ethernet controller Amit Singh Tomar
2020-05-12 14:18 ` André Przywara
2020-05-12 14:25 ` Tom Rini
2020-05-12 14:42 ` Amit Tomer
2020-05-12 14:53 ` Tom Rini
2020-05-12 14:53 ` André Przywara
2020-05-12 15:09 ` Tom Rini
2020-05-12 16:14 ` Amit Tomer
2020-05-12 16:39 ` André Przywara
2020-05-12 19:59 ` Tom Rini
2020-05-12 14:37 ` Amit Tomer
2020-05-12 14:56 ` André Przywara
2020-07-08 3:03 ` Tom Rini
2020-05-09 14:25 ` [PATCH v1 6/7] owl: Kconfig: Enable DM eth for OWL platform Amit Singh Tomar
2020-07-08 3:03 ` Tom Rini
2020-05-09 14:25 ` [PATCH v1 7/7] configs: Enable mac and phy configs Amit Singh Tomar
2020-07-08 3:03 ` Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1589034315-19722-1-git-send-email-amittomer25@gmail.com \
--to=amittomer25@gmail.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.