From: James Bottomley <James.Bottomley@HansenPartnership.com>
To: Andrew Morton <akpm@linux-foundation.org>,
Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>,
linux-kernel <linux-kernel@vger.kernel.org>
Subject: [GIT PULL] first round of SCSI updates for the 5.6+ merge window
Date: Thu, 04 Jun 2020 21:55:25 -0700 [thread overview]
Message-ID: <1591332925.3685.16.camel@HansenPartnership.com> (raw)
This series consists of the usual driver updates (qla2xxx, ufs, zfcp,
target, scsi_debug, lpfc, qedi, qedf, hisi_sas, mpt3sas) plus a host of
other minor updates. There are no major core changes in this series
apart from a refactoring in scsi_lib.c.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Alex Dewar (2):
scsi: aic7xxx: Remove unnecessary NULL checks before kfree
scsi: aic7xxx: Use kzalloc() instead of kmalloc()+memset()
André Almeida (1):
scsi: core: doc: Change function comments to kernel-doc style
Arun Easi (1):
scsi: qla2xxx: Fix MPI failure AEN (8200) handling
Asutosh Das (4):
scsi: ufs-qcom: Configure write booster type
scsi: ufs: sysfs: Add sysfs entries for write booster
scsi: ufs: Add write booster feature support
scsi: ufs: full reinit upon resume if link was off
Bart Van Assche (20):
scsi: qla2xxx: Remove an unused function
scsi: qla2xxx: Fix endianness annotations in source files
scsi: qla2xxx: Fix endianness annotations in header files
scsi: qla2xxx: Use make_handle() instead of open-coding it
scsi: qla2xxx: Cast explicitly to uint16_t / uint32_t
scsi: qla2xxx: Change {RD,WRT}_REG_*() function names from upper case into lower case
scsi: qla2xxx: Fix the code that reads from mailbox registers
scsi: qla2xxx: Use register names instead of register offsets
scsi: qla2xxx: Change two hardcoded constants into offsetof() / sizeof() expressions
scsi: qla2xxx: Increase the size of struct qla_fcp_prio_cfg to FCP_PRIO_CFG_SIZE
scsi: qla2xxx: Make a gap in struct qla2xxx_offld_chain explicit
scsi: qla2xxx: Add more BUILD_BUG_ON() statements
scsi: qla2xxx: Sort BUILD_BUG_ON() statements alphabetically
scsi: qla2xxx: Simplify the functions for dumping firmware
scsi: qla2xxx: Suppress two recently introduced compiler warnings
scsi: qla2xxx: Fix spelling of a variable name
scsi: ufs: Make ufshcd_wait_for_register() sleep instead of busy-waiting
scsi: sr: Use {get,put}_unaligned_be*() instead of open-coding these functions
scsi: qla2xxx: Use ARRAY_SIZE() instead of open-coding it
scsi: qla2xxx: Split qla2x00_configure_local_loop()
Benjamin Block (8):
scsi: zfcp: Move allocation of the shost object to after xconf- and xport-data
scsi: zfcp: Fence early sysfs interfaces for accesses of shost objects
scsi: zfcp: Fence adapter status propagation for common statuses
scsi: zfcp: Move p-t-p port allocation to after xport data
scsi: zfcp: Fence fc_host updates during link-down handling
scsi: zfcp: Move fc_host updates during xport data handling into fenced function
scsi: zfcp: Move shost updates during xconfig data handling into fenced function
scsi: zfcp: Move shost modification after QDIO (re-)open into fenced function
Bob Liu (1):
scsi: iscsi: Register sysfs for iscsi workqueue
Bodo Stroesser (6):
scsi: target: tcmu: Userspace must not complete queued commands
scsi: target: loopback: Fix READ with data and sensebytes
scsi: target: tcmu: Make pgr_support and alua_support attributes writable
scsi: target: Make transport_flags per device
scsi: target: tcmu: Add attributes enforce_pr_isids and force_pr_aptpl
scsi: target: Add missing emulate_pr attribute to passthrough backends
Chad Dupuis (2):
scsi: qedf: Fix crash when MFW calls for protocol stats while function is still probing
scsi: qedf: Add schedule recovery handler
Chandrakanth Patil (1):
scsi: megaraid_sas: Update driver version to 07.714.04.00-rc1
Chen Tao (1):
scsi: ibmvscsi: Make some functions static
ChenTao (1):
scsi: ufs-mediatek: Make ufs_mtk_fixup_dev_quirks static
Christoph Hellwig (1):
scsi: mpt3sas: Don't change the DMA coherent mask after allocations
Christophe JAILLET (1):
scsi: aacraid: Fix error handling paths in aac_probe_one()
Colin Ian King (2):
scsi: lpfc: Remove redundant initialization to variable rc
scsi: qla2xxx: make 1-bit bit-fields unsigned int
Damien Le Moal (7):
scsi: sd: Add zoned capabilities device attribute
scsi: sd: Signal drive managed SMR disks
scsi: scsi_debug: Disallow zone sizes that are not powers of 2
scsi: scsi_debug: Implement ZBC host-aware emulation
scsi: scsi_debug: Add zone_size_mb module parameter
scsi: scsi_debug: Add zone_nr_conv module parameter
scsi: scsi_debug: Add zone_max_open module parameter
Dan Carpenter (5):
scsi: cxgb3i: Fix some leaks in init_act_open()
scsi: target: tcmu: Fix a use after free in tcmu_check_expired_queue_cmd()
scsi: aacraid: Fix an oops in error handling
scsi: scsi_debug: Fix an error handling bug in sdeb_zbc_model_str()
scsi: qedi: Check for buffer overflow in qedi_set_path()
Daniel Wagner (2):
scsi: qla2xxx: Remove return value from qla_nvme_ls()
scsi: qedf: Simplify mutex_unlock() usage
Dick Kennedy (8):
scsi: lpfc: Update lpfc version to 12.8.0.1
scsi: lpfc: Fix MDS Diagnostic Enablement definition
scsi: lpfc: Fix noderef and address space warnings
scsi: lpfc: Remove unnecessary lockdep_assert_held calls
scsi: lpfc: Change default queue allocation for reduced memory consumption
scsi: lpfc: Fix negation of else clause in lpfc_prep_node_fc4type
scsi: lpfc: Remove re-binding of nvme rport during registration
scsi: lpfc: Maintain atomic consistency of queue_claimed flag
Douglas Gilbert (12):
scsi: scsi_debug: Parser tables and code interaction
scsi: scsi_debug: Add ZBC module parameter
scsi: scsi_debug: Add ZBC zone commands
scsi: scsi_debug: Add ZBC mode and VPD pages
scsi: scsi_debug: Bump to version 1.89
scsi: scsi_debug: Re-arrange parameters alphabetically
scsi: scsi_debug: Implement PRE-FETCH commands
scsi: scsi_debug: Improve command duration calculation
scsi: scsi_debug: Weaken rwlock around ramdisk access
scsi: scsi_debug: Implement VERIFY(10), add VERIFY(16)
scsi: scsi_debug: Add per_host_store option
scsi: scsi_debug: Randomize command completion time
Gabriel Krisman Bertazi (1):
scsi: iscsi: Fix deadlock on recovery path during GFP_IO reclaim
Gustavo A. R. Silva (2):
scsi: ufs: Replace zero-length array with flexible-array
scsi: libsas: Replace zero-length array with flexible-array
Hannes Reinecke (1):
scsi: core: Remove 'list' entry from struct scsi_cmnd
James Smart (1):
scsi: lpfc: remove duplicate unloading checks
Jason Yan (45):
scsi: hisi_sas: Display proc_name in sysfs
scsi: bfa: Make bfad_iocmd_ioc_get_stats() static
scsi: mpt3sas: Use true, false for ioc->use_32bit_dma
scsi: vmw_pvscsi: Use true, false for adapter->use_msg
scsi: fnic: Use true, false for fnic->internal_reset_inprogress
scsi: qedi: Remove comparison of 0/1 to bool variable
scsi: qla2xxx: Make qlafx00_process_aen() return void
scsi: qla2xxx: Use true, false for ha->fw_dumped
scsi: qla2xxx: Use true, false for need_mpi_reset
scsi: qla2xxx: Make qla_set_ini_mode() return void
scsi: ufs: Use true for bool variables in ufshcd_complete_dev_init()
scsi: sgiwd93: Remove unneeded semicolon in sgiwd93.c
scsi: qla4xxx: Remove unneeded semicolon in ql4_os.c
scsi: isci: Use true, false for bool variables
scsi: bnx2fc: Remove unneeded semicolon in bnx2fc_fcoe.c
scsi: bfa: Remove unneeded semicolon in bfa_fcs_rport.c
scsi: snic: Make snic_io_exch_ver_cmpl_handler() return void
scsi: mpt3sas: Remove NULL check before freeing function
scsi: ipr: Remove NULL check before freeing function
scsi: bfa: Remove unneeded semicolon in bfa_fcs_lport_ns_sm_online()
scsi: BusLogic: Remove conversion to bool in blogic_inquiry()
scsi: megaraid: Use true, false for bool variables
scsi: mpt3sas: use true,false for bool variables
scsi: fcoe: remove unneeded semicolon in fcoe.c
scsi: ufs-qcom: remove unneeded variable 'ret'
scsi: st: remove unneeded variable 'result' in st_release()
scsi: mvsas: remove unused symbol 'mvs_th'
scsi: mvsas: make mvst_host_attrs static
scsi: qedi: make qedi_ll2_buf_size static
scsi: fnic: make vnic_wq_get_ctrl and vnic_wq_alloc_ring static
scsi: fnic: make fnic_list and fnic_list_lock static
scsi: fnic: make some symbols static
scsi: ipr: remove unneeded semicolon
scsi: qla1280: make qla1280_firmware_mutex and qla1280_fw_tbl static
scsi: megaraid: make two symbols static in megaraid_sas_base.c
scsi: megaraid: make some symbols static in megaraid_sas_fusion.c
scsi: megaraid: make some symbols static in megaraid_sas_fp.c
scsi: megaraid: make two symbols static in megaraid_mbox.c
scsi: bfa: bfad.c: make max_rport_logins static
scsi: bfa: bfad_attr.c: make two funcitons static
scsi: bfa: bfa_ioc_ct.c: make two funcitons static
scsi: bfa: bfa_fcs_lport.c: make bfa_fcport_get_loop_attr() static
scsi: bfa: bfa_fcpim.c: make two functions static
scsi: bfa: bfa_core.c: make bfa_isr_rspq() static
scsi: bfa: bfa_svc.c: make two functions static
Javed Hasan (3):
scsi: qedf: Honor status qualifier in FCP_RSP per spec
scsi: qedf: Acquire rport_lock for resetting the delay_timestamp
scsi: qedf: Increase the upper limit of retry delay
Jeffrey Hugo (1):
scsi: ufs-qcom: Fix scheduling while atomic issue
Johannes Thumshirn (1):
scsi: core: free sgtables in case command setup fails
John Garry (1):
scsi: hisi_sas: Stop returning error code from slot_complete_vX_hw()
Jules Irenge (2):
scsi: bnx2fc: Add missing annotation for bnx2fc_abts_cleanup()
scsi: libsas: Add missing annotation for sas_ata_qc_issue()
Kashyap Desai (1):
scsi: megaraid_sas: Limit device queue depth to controller queue depth
Lance Digby (1):
scsi: target: core: Add initiatorname to NON_EXISTENT_LUN error
Luo Jiaxing (3):
scsi: hisi_sas: Add SAS_RAS_INTR0 to debugfs register name list
scsi: hisi_sas: Modify the commit information for DSM method
scsi: hisi_sas: Do not reset phy timer to wait for stray phy up
Manish Rangankar (4):
scsi: qedi: Add modules param to enable qed iSCSI debug
scsi: qedi: Use correct msix count for fastpath vectors
scsi: qedi: Avoid unnecessary endpoint allocation on link down
scsi: qedi: Remove additional char from boot target iqnname
Maurizio Lombardi (1):
scsi: target: iscsi: Remove the iscsi_data_count structure
Mauro Carvalho Chehab (1):
scsi: docs: fusion: get rid of a doc build warning
Ming Lei (1):
scsi: core: Avoid calling synchronize_rcu() for each device in scsi_host_block()
Nilesh Javali (2):
scsi: qedi: Fix termination timeouts in session logout
scsi: qedi: Do not flush offload work if ARP not resolved
Samuel Zou (1):
scsi: mpt3sas: Remove unused including <linux/version.h>
Saurav Kashyap (3):
scsi: qedf: Get dev info after updating the params
scsi: qedf: Implement callback for bw_update
scsi: qedf: Keep track of num of pending flogi
Shivasharan S (1):
scsi: megaraid_sas: Replace undefined MFI_BIG_ENDIAN macro with __BIG_ENDIAN_BITFIELD macro
Sreekanth Reddy (1):
scsi: mpt3sas: Disable DIF when prot_mask set to zero
Stanley Chu (15):
scsi: ufs: Fix WriteBooster flush during runtime suspend
scsi: ufs: Fix index of attributes query for WriteBooster feature
scsi: ufs: Allow WriteBooster on UFS 2.2 devices
scsi: ufs: Remove unnecessary memset for dev_info
scsi: ufs-mediatek: Customize WriteBooster flush policy
scsi: ufs: Customize flush threshold for WriteBooster
scsi: ufs: Introduce ufs_hba_variant_params to group customizable parameters
scsi: ufs: Cleanup WriteBooster feature
scsi: ufs-mediatek: Enable WriteBooster capability
scsi: ufs: Add LU Dedicated buffer mode support for WriteBooster
scsi: ufs: Add "index" in parameter list of ufshcd_query_flag()
scsi: ufs-mediatek: Add fixup_dev_quirks vops
scsi: ufs: Export ufs_fixup_device_setup() function
scsi: ufs: Introduce fixup_dev_quirks vops
scsi: ufs: Enable WriteBooster on some pre-3.1 UFS devices
Sudarsana Reddy Kalluru (1):
scsi: qed: Send BW update notifications to the protocol drivers
Sudhakar Panneerselvam (1):
scsi: vhost: Notify TCM about the maximum sg entries supported per command
Suganath Prabu (6):
scsi: mpt3sas: Update maintainers
scsi: mpt3sas: Capture IOC data for debugging purposes
scsi: mpt3sas: Update mpt3sas version to 33.101.00.00
scsi: mpt3sas: Handle RDPQ DMA allocation in same 4G region
scsi: mpt3sas: Separate out RDPQ allocation to new function
scsi: mpt3sas: Rename function name is_MSB_are_same
Suganath Prabu S (2):
scsi: mpt3sas: Fix reply queue count in non RDPQ mode
scsi: mpt3sas: Fix double free warnings
Sumit Saxena (2):
scsi: megaraid_sas: TM command refire leads to controller firmware crash
scsi: megaraid_sas: Remove IO buffer hole detection logic
Viacheslav Dubeyko (3):
scsi: qla2xxx: Fix issue with adapter's stopping state
scsi: qla2xxx: Fix failure message in qlt_disable_vha()
scsi: qla2xxx: Fix warning after FC target reset
Vignesh Raghavendra (1):
scsi: ufs: ti-j721e-ufs: Fix unwinding of pm_runtime changes
Wang Hai (1):
scsi: gdth: Make __gdth_execute static
Wei Yongjun (1):
scsi: cxlflash: Fix error return code in cxlflash_probe()
Wu Bo (1):
scsi: pmcraid: Replace dma_pool_malloc with dma_pool_zalloc
Xie XiuQi (1):
scsi: qedi: Remove unused variable udev & uctrl
Xiongfeng Wang (1):
scsi: dpt_i2o: Remove always false 'chan < 0' statement
Xiyu Yang (1):
scsi: lpfc: Fix lpfc_nodelist leak when processing unsolicited event
Xu Wang (1):
scsi: cxgb4i: Remove superfluous null check
Ye Bin (2):
scsi: core: Refactor scsi_mq_setup_tags function
scsi: core: Fix incorrect usage of shost_for_each_device
YueHaibing (1):
scsi: bfa: Remove set but not used variable 'fchs'
Zou Wei (2):
scsi: aacraid: Use memdup_user() as a cleanup
scsi: aacraid: Make some symbols static
And the diffstat:
MAINTAINERS | 2 +-
drivers/message/fusion/mptbase.c | 8 +-
drivers/net/ethernet/qlogic/qed/qed.h | 1 +
drivers/net/ethernet/qlogic/qed/qed_main.c | 9 +
drivers/s390/scsi/zfcp_aux.c | 5 +-
drivers/s390/scsi/zfcp_diag.h | 6 +-
drivers/s390/scsi/zfcp_erp.c | 84 +-
drivers/s390/scsi/zfcp_ext.h | 11 +
drivers/s390/scsi/zfcp_fsf.c | 76 +-
drivers/s390/scsi/zfcp_qdio.c | 19 +-
drivers/s390/scsi/zfcp_scsi.c | 131 +-
drivers/s390/scsi/zfcp_sysfs.c | 16 +-
drivers/scsi/BusLogic.c | 2 +-
drivers/scsi/aacraid/aachba.c | 1 -
drivers/scsi/aacraid/commctrl.c | 13 +-
drivers/scsi/aacraid/commsup.c | 4 +-
drivers/scsi/aacraid/linit.c | 16 +-
drivers/scsi/aic7xxx/aic79xx_core.c | 18 +-
drivers/scsi/aic7xxx/aic7xxx_core.c | 19 +-
drivers/scsi/aic94xx/aic94xx_sds.c | 14 +-
drivers/scsi/bfa/bfa_core.c | 2 +-
drivers/scsi/bfa/bfa_fcpim.c | 4 +-
drivers/scsi/bfa/bfa_fcs_lport.c | 4 +-
drivers/scsi/bfa/bfa_fcs_rport.c | 4 +-
drivers/scsi/bfa/bfa_ioc_ct.c | 4 +-
drivers/scsi/bfa/bfa_svc.c | 7 +-
drivers/scsi/bfa/bfad.c | 2 +-
drivers/scsi/bfa/bfad_attr.c | 4 +-
drivers/scsi/bfa/bfad_bsg.c | 2 +-
drivers/scsi/bnx2fc/bnx2fc_fcoe.c | 4 +-
drivers/scsi/bnx2fc/bnx2fc_io.c | 1 +
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c | 18 +-
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c | 7 +-
drivers/scsi/cxlflash/main.c | 1 +
drivers/scsi/dpt_i2o.c | 2 +-
drivers/scsi/fcoe/fcoe.c | 4 +-
drivers/scsi/fnic/fnic_main.c | 4 +-
drivers/scsi/fnic/fnic_scsi.c | 6 +-
drivers/scsi/fnic/vnic_dev.c | 12 +-
drivers/scsi/fnic/vnic_wq.c | 4 +-
drivers/scsi/gdth.c | 4 +-
drivers/scsi/hisi_sas/hisi_sas_main.c | 5 +-
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 13 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 17 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 26 +-
drivers/scsi/ibmvscsi/ibmvscsi.c | 4 +-
drivers/scsi/ipr.c | 5 +-
drivers/scsi/isci/isci.h | 6 +-
drivers/scsi/libiscsi.c | 4 +-
drivers/scsi/libsas/sas_ata.c | 1 +
drivers/scsi/lpfc/lpfc.h | 23 +-
drivers/scsi/lpfc/lpfc_attr.c | 108 +-
drivers/scsi/lpfc/lpfc_ct.c | 1 -
drivers/scsi/lpfc/lpfc_debugfs.c | 3 +-
drivers/scsi/lpfc/lpfc_els.c | 12 +-
drivers/scsi/lpfc/lpfc_hbadisc.c | 8 +-
drivers/scsi/lpfc/lpfc_hw4.h | 2 +-
drivers/scsi/lpfc/lpfc_init.c | 82 +-
drivers/scsi/lpfc/lpfc_mbox.c | 3 +-
drivers/scsi/lpfc/lpfc_nvme.c | 37 -
drivers/scsi/lpfc/lpfc_nvmet.c | 11 -
drivers/scsi/lpfc/lpfc_sli.c | 45 +-
drivers/scsi/lpfc/lpfc_sli4.h | 2 +-
drivers/scsi/lpfc/lpfc_version.h | 2 +-
drivers/scsi/megaraid/megaraid_mbox.c | 6 +-
drivers/scsi/megaraid/megaraid_sas.h | 8 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 10 +-
drivers/scsi/megaraid/megaraid_sas_fp.c | 12 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 81 +-
drivers/scsi/megaraid/megaraid_sas_fusion.h | 6 +-
drivers/scsi/mpt3sas/Makefile | 3 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 266 ++--
drivers/scsi/mpt3sas/mpt3sas_base.h | 21 +-
drivers/scsi/mpt3sas/mpt3sas_debugfs.c | 157 ++
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 8 +-
drivers/scsi/mvsas/mv_init.c | 6 +-
drivers/scsi/pmcraid.c | 4 +-
drivers/scsi/qedf/qedf.h | 6 +-
drivers/scsi/qedf/qedf_els.c | 10 +-
drivers/scsi/qedf/qedf_io.c | 48 +-
drivers/scsi/qedf/qedf_main.c | 135 +-
drivers/scsi/qedi/qedi_iscsi.c | 21 +-
drivers/scsi/qedi/qedi_main.c | 22 +-
drivers/scsi/qla1280.c | 4 +-
drivers/scsi/qla2xxx/qla_attr.c | 40 +-
drivers/scsi/qla2xxx/qla_bsg.c | 8 +-
drivers/scsi/qla2xxx/qla_dbg.c | 866 +++++------
drivers/scsi/qla2xxx/qla_dbg.h | 443 +++---
drivers/scsi/qla2xxx/qla_def.h | 728 +++++-----
drivers/scsi/qla2xxx/qla_fw.h | 768 +++++-----
drivers/scsi/qla2xxx/qla_gbl.h | 26 +-
drivers/scsi/qla2xxx/qla_init.c | 380 ++---
drivers/scsi/qla2xxx/qla_inline.h | 8 +-
drivers/scsi/qla2xxx/qla_iocb.c | 140 +-
drivers/scsi/qla2xxx/qla_isr.c | 287 ++--
drivers/scsi/qla2xxx/qla_mbx.c | 123 +-
drivers/scsi/qla2xxx/qla_mid.c | 4 +-
drivers/scsi/qla2xxx/qla_mr.c | 120 +-
drivers/scsi/qla2xxx/qla_mr.h | 32 +-
drivers/scsi/qla2xxx/qla_nvme.c | 16 +-
drivers/scsi/qla2xxx/qla_nvme.h | 64 +-
drivers/scsi/qla2xxx/qla_nx.c | 208 ++-
drivers/scsi/qla2xxx/qla_nx.h | 36 +-
drivers/scsi/qla2xxx/qla_nx2.c | 26 +-
drivers/scsi/qla2xxx/qla_os.c | 133 +-
drivers/scsi/qla2xxx/qla_sup.c | 323 +++--
drivers/scsi/qla2xxx/qla_target.c | 111 +-
drivers/scsi/qla2xxx/qla_target.h | 232 +--
drivers/scsi/qla2xxx/qla_tmpl.c | 140 +-
drivers/scsi/qla2xxx/qla_tmpl.h | 2 +-
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 16 +
drivers/scsi/qla4xxx/ql4_os.c | 2 +-
drivers/scsi/scsi_debug.c | 2072 +++++++++++++++++++++++----
drivers/scsi/scsi_error.c | 2 +
drivers/scsi/scsi_lib.c | 230 ++-
drivers/scsi/scsi_transport_iscsi.c | 68 +-
drivers/scsi/sd.c | 19 +
drivers/scsi/sgiwd93.c | 2 +-
drivers/scsi/snic/snic.h | 2 +-
drivers/scsi/snic/snic_ctl.c | 5 +-
drivers/scsi/sr.c | 26 +-
drivers/scsi/st.c | 5 +-
drivers/scsi/ufs/ti-j721e-ufs.c | 13 +-
drivers/scsi/ufs/ufs-mediatek.c | 30 +-
drivers/scsi/ufs/ufs-qcom.c | 10 +-
drivers/scsi/ufs/ufs-sysfs.c | 61 +-
drivers/scsi/ufs/ufs.h | 43 +-
drivers/scsi/ufs/ufs_quirks.h | 7 +
drivers/scsi/ufs/ufshcd.c | 515 +++++--
drivers/scsi/ufs/ufshcd.h | 45 +-
drivers/scsi/vmw_pvscsi.c | 2 +-
drivers/target/iscsi/iscsi_target_util.c | 30 +-
drivers/target/loopback/tcm_loop.c | 36 +-
drivers/target/target_core_alua.c | 10 +-
drivers/target/target_core_configfs.c | 82 +-
drivers/target/target_core_device.c | 13 +-
drivers/target/target_core_pr.c | 2 +-
drivers/target/target_core_pscsi.c | 6 +-
drivers/target/target_core_tpg.c | 3 +-
drivers/target/target_core_transport.c | 6 +-
drivers/target/target_core_user.c | 177 ++-
drivers/vhost/scsi.c | 1 +
include/linux/qed/qed_if.h | 1 +
include/scsi/sas.h | 8 +-
include/scsi/scsi_cmnd.h | 1 -
include/target/iscsi/iscsi_target_core.h | 10 -
include/target/target_core_backend.h | 4 +-
include/target/target_core_base.h | 1 +
include/trace/events/qla.h | 7 +
149 files changed, 6664 insertions(+), 3982 deletions(-)
create mode 100644 drivers/scsi/mpt3sas/mpt3sas_debugfs.c
James
next reply other threads:[~2020-06-05 4:55 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-05 4:55 James Bottomley [this message]
2020-06-05 21:11 ` [GIT PULL] first round of SCSI updates for the 5.6+ merge window Linus Torvalds
2020-06-05 21:18 ` James Bottomley
2020-06-05 21:25 ` Linus Torvalds
2020-06-05 21:41 ` James Bottomley
-- strict thread matches above, loose matches on Subject: below --
2020-04-02 16:06 James Bottomley
2020-04-03 0:40 ` pr-tracker-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1591332925.3685.16.camel@HansenPartnership.com \
--to=james.bottomley@hansenpartnership.com \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.