From: Corentin Labbe <clabbe@baylibre.com>
To: davem@davemloft.net, herbert@gondor.apana.org.au,
mripard@kernel.org, wens@csie.org
Cc: linux-arm-kernel@lists.infradead.org,
linux-crypto@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-sunxi@googlegroups.com,
Corentin Labbe <clabbe@baylibre.com>
Subject: [PATCH v3 02/14] crypto: sun8i-ss: Add support for the PRNG
Date: Sun, 21 Jun 2020 19:30:55 +0000 [thread overview]
Message-ID: <1592767867-35982-3-git-send-email-clabbe@baylibre.com> (raw)
In-Reply-To: <1592767867-35982-1-git-send-email-clabbe@baylibre.com>
This patch had support for the PRNG present in the SS.
The output was tested with rngtest without any failure.
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
---
drivers/crypto/allwinner/Kconfig | 8 +
drivers/crypto/allwinner/sun8i-ss/Makefile | 1 +
.../crypto/allwinner/sun8i-ss/sun8i-ss-core.c | 39 ++++
.../crypto/allwinner/sun8i-ss/sun8i-ss-prng.c | 170 ++++++++++++++++++
drivers/crypto/allwinner/sun8i-ss/sun8i-ss.h | 25 +++
5 files changed, 243 insertions(+)
create mode 100644 drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c
diff --git a/drivers/crypto/allwinner/Kconfig b/drivers/crypto/allwinner/Kconfig
index d315427ea1ba..a0bdb26d0fe4 100644
--- a/drivers/crypto/allwinner/Kconfig
+++ b/drivers/crypto/allwinner/Kconfig
@@ -95,3 +95,11 @@ config CRYPTO_DEV_SUN8I_SS_DEBUG
Say y to enable sun8i-ss debug stats.
This will create /sys/kernel/debug/sun8i-ss/stats for displaying
the number of requests per flow and per algorithm.
+
+config CRYPTO_DEV_SUN8I_SS_PRNG
+ bool "Support for Allwinner Security System PRNG"
+ depends on CRYPTO_DEV_SUN8I_SS
+ select CRYPTO_RNG
+ help
+ Select this option if you want to provide kernel-side support for
+ the Pseudo-Random Number Generator found in the Security System.
diff --git a/drivers/crypto/allwinner/sun8i-ss/Makefile b/drivers/crypto/allwinner/sun8i-ss/Makefile
index add7b0543fd5..49f2f912c816 100644
--- a/drivers/crypto/allwinner/sun8i-ss/Makefile
+++ b/drivers/crypto/allwinner/sun8i-ss/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_CRYPTO_DEV_SUN8I_SS) += sun8i-ss.o
sun8i-ss-y += sun8i-ss-core.o sun8i-ss-cipher.o
+sun8i-ss-$(CONFIG_CRYPTO_DEV_SUN8I_SS_PRNG) += sun8i-ss-prng.o
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
index 81eff935fb5c..592ee35616ba 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-core.c
@@ -22,6 +22,7 @@
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
+#include <crypto/internal/rng.h>
#include <crypto/internal/skcipher.h>
#include "sun8i-ss.h"
@@ -260,6 +261,25 @@ static struct sun8i_ss_alg_template ss_algs[] = {
.decrypt = sun8i_ss_skdecrypt,
}
},
+#ifdef CONFIG_CRYPTO_DEV_SUN8I_SS_PRNG
+{
+ .type = CRYPTO_ALG_TYPE_RNG,
+ .alg.rng = {
+ .base = {
+ .cra_name = "stdrng",
+ .cra_driver_name = "sun8i-ss-prng",
+ .cra_priority = 300,
+ .cra_ctxsize = sizeof(struct sun8i_ss_rng_tfm_ctx),
+ .cra_module = THIS_MODULE,
+ .cra_init = sun8i_ss_prng_init,
+ .cra_exit = sun8i_ss_prng_exit,
+ },
+ .generate = sun8i_ss_prng_generate,
+ .seed = sun8i_ss_prng_seed,
+ .seedsize = PRNG_SEED_SIZE,
+ }
+},
+#endif
};
#ifdef CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG
@@ -281,6 +301,12 @@ static int sun8i_ss_dbgfs_read(struct seq_file *seq, void *v)
ss_algs[i].alg.skcipher.base.cra_name,
ss_algs[i].stat_req, ss_algs[i].stat_fb);
break;
+ case CRYPTO_ALG_TYPE_RNG:
+ seq_printf(seq, "%s %s %lu %lu\n",
+ ss_algs[i].alg.rng.base.cra_driver_name,
+ ss_algs[i].alg.rng.base.cra_name,
+ ss_algs[i].stat_req, ss_algs[i].stat_bytes);
+ break;
}
}
return 0;
@@ -444,6 +470,14 @@ static int sun8i_ss_register_algs(struct sun8i_ss_dev *ss)
return err;
}
break;
+ case CRYPTO_ALG_TYPE_RNG:
+ err = crypto_register_rng(&ss_algs[i].alg.rng);
+ if (err) {
+ dev_err(ss->dev, "Fail to register %s\n",
+ ss_algs[i].alg.rng.base.cra_name);
+ ss_algs[i].ss = NULL;
+ }
+ break;
default:
ss_algs[i].ss = NULL;
dev_err(ss->dev, "ERROR: tried to register an unknown algo\n");
@@ -465,6 +499,11 @@ static void sun8i_ss_unregister_algs(struct sun8i_ss_dev *ss)
ss_algs[i].alg.skcipher.base.cra_name);
crypto_unregister_skcipher(&ss_algs[i].alg.skcipher);
break;
+ case CRYPTO_ALG_TYPE_RNG:
+ dev_info(ss->dev, "Unregister %d %s\n", i,
+ ss_algs[i].alg.rng.base.cra_name);
+ crypto_unregister_rng(&ss_algs[i].alg.rng);
+ break;
}
}
}
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c
new file mode 100644
index 000000000000..b5752692991e
--- /dev/null
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sun8i-ss-prng.c - hardware cryptographic offloader for
+ * Allwinner A80/A83T SoC
+ *
+ * Copyright (C) 2015-2020 Corentin Labbe <clabbe@baylibre.com>
+ *
+ * This file handle the PRNG found in the SS
+ *
+ * You could find a link for the datasheet in Documentation/arm/sunxi.rst
+ */
+#include "sun8i-ss.h"
+#include <linux/pm_runtime.h>
+#include <crypto/internal/rng.h>
+
+int sun8i_ss_prng_seed(struct crypto_rng *tfm, const u8 *seed,
+ unsigned int slen)
+{
+ struct sun8i_ss_rng_tfm_ctx *ctx = crypto_rng_ctx(tfm);
+
+ if (ctx->seed && ctx->slen != slen) {
+ memzero_explicit(ctx->seed, ctx->slen);
+ kfree(ctx->seed);
+ ctx->slen = 0;
+ ctx->seed = NULL;
+ }
+ if (!ctx->seed)
+ ctx->seed = kmalloc(slen, GFP_KERNEL | GFP_DMA);
+ if (!ctx->seed)
+ return -ENOMEM;
+
+ memcpy(ctx->seed, seed, slen);
+ ctx->slen = slen;
+
+ return 0;
+}
+
+int sun8i_ss_prng_init(struct crypto_tfm *tfm)
+{
+ struct sun8i_ss_rng_tfm_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ memset(ctx, 0, sizeof(struct sun8i_ss_rng_tfm_ctx));
+ return 0;
+}
+
+void sun8i_ss_prng_exit(struct crypto_tfm *tfm)
+{
+ struct sun8i_ss_rng_tfm_ctx *ctx = crypto_tfm_ctx(tfm);
+
+ memzero_explicit(ctx->seed, ctx->slen);
+ kfree(ctx->seed);
+ ctx->seed = NULL;
+ ctx->slen = 0;
+}
+
+int sun8i_ss_prng_generate(struct crypto_rng *tfm, const u8 *src,
+ unsigned int slen, u8 *dst, unsigned int dlen)
+{
+ struct sun8i_ss_rng_tfm_ctx *ctx = crypto_rng_ctx(tfm);
+ struct rng_alg *alg = crypto_rng_alg(tfm);
+ struct sun8i_ss_alg_template *algt;
+ struct sun8i_ss_dev *ss;
+ dma_addr_t dma_iv, dma_dst;
+ unsigned int todo;
+ int err = 0;
+ int flow;
+ void *d;
+ u32 v;
+
+ algt = container_of(alg, struct sun8i_ss_alg_template, alg.rng);
+ ss = algt->ss;
+
+ if (ctx->slen == 0) {
+ dev_err(ss->dev, "The PRNG is not seeded\n");
+ return -EINVAL;
+ }
+
+ /* The SS does not give an updated seed, so we need to get a new one.
+ * So we will ask for an extra PRNG_SEED_SIZE data.
+ * We want dlen + seedsize rounded up to a multiple of PRNG_DATA_SIZE
+ */
+ todo = dlen + PRNG_SEED_SIZE + PRNG_DATA_SIZE;
+ todo -= todo % PRNG_DATA_SIZE;
+
+ d = kzalloc(todo, GFP_KERNEL | GFP_DMA);
+ if (!d)
+ return -ENOMEM;
+
+ flow = sun8i_ss_get_engine_number(ss);
+
+#ifdef CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG
+ algt->stat_req++;
+ algt->stat_bytes += todo;
+#endif
+
+ v = SS_ALG_PRNG | SS_PRNG_CONTINUE | SS_START;
+ if (flow)
+ v |= SS_FLOW1;
+ else
+ v |= SS_FLOW0;
+
+ dma_iv = dma_map_single(ss->dev, ctx->seed, ctx->slen, DMA_TO_DEVICE);
+ if (dma_mapping_error(ss->dev, dma_iv)) {
+ dev_err(ss->dev, "Cannot DMA MAP IV\n");
+ return -EFAULT;
+ }
+
+ dma_dst = dma_map_single(ss->dev, d, todo, DMA_FROM_DEVICE);
+ if (dma_mapping_error(ss->dev, dma_dst)) {
+ dev_err(ss->dev, "Cannot DMA MAP DST\n");
+ err = -EFAULT;
+ goto err_iv;
+ }
+
+ err = pm_runtime_get_sync(ss->dev);
+ if (err < 0)
+ goto err_pm;
+ err = 0;
+
+ mutex_lock(&ss->mlock);
+ writel(dma_iv, ss->base + SS_IV_ADR_REG);
+ /* the PRNG act badly (failing rngtest) without SS_KEY_ADR_REG set */
+ writel(dma_iv, ss->base + SS_KEY_ADR_REG);
+ writel(dma_dst, ss->base + SS_DST_ADR_REG);
+ writel(todo / 4, ss->base + SS_LEN_ADR_REG);
+
+ reinit_completion(&ss->flows[flow].complete);
+ ss->flows[flow].status = 0;
+ /* Be sure all data is written before enabling the task */
+ wmb();
+
+ writel(v, ss->base + SS_CTL_REG);
+
+ wait_for_completion_interruptible_timeout(&ss->flows[flow].complete,
+ msecs_to_jiffies(todo));
+ if (ss->flows[flow].status == 0) {
+ dev_err(ss->dev, "DMA timeout for PRNG (size=%u)\n", todo);
+ err = -EFAULT;
+ }
+ /* Since cipher and hash use the linux/cryptoengine and that we have
+ * a cryptoengine per flow, we are sure that they will issue only one
+ * request per flow.
+ * Since the cryptoengine wait for completion before submitting a new
+ * one, the mlock could be left just after the final writel.
+ * But cryptoengine cannot handle crypto_rng, so we need to be sure
+ * nothing will use our flow.
+ * The easiest way is to grab mlock until the hardware end our requests.
+ * We could have used a per flow lock, but this would increase
+ * complexity.
+ * The drawback is that no request could be handled for the other flow.
+ */
+ mutex_unlock(&ss->mlock);
+
+ pm_runtime_put(ss->dev);
+
+err_pm:
+ dma_unmap_single(ss->dev, dma_dst, todo, DMA_FROM_DEVICE);
+err_iv:
+ dma_unmap_single(ss->dev, dma_iv, ctx->slen, DMA_TO_DEVICE);
+
+ if (!err) {
+ memcpy(dst, d, dlen);
+ /* Update seed */
+ memcpy(ctx->seed, d + dlen, ctx->slen);
+ }
+ memzero_explicit(d, todo);
+ kfree(d);
+
+ return err;
+}
diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss.h b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss.h
index f7a64033fc03..0223e10495ac 100644
--- a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss.h
+++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss.h
@@ -8,6 +8,7 @@
#include <crypto/aes.h>
#include <crypto/des.h>
#include <crypto/engine.h>
+#include <crypto/rng.h>
#include <crypto/skcipher.h>
#include <linux/atomic.h>
#include <linux/debugfs.h>
@@ -21,6 +22,7 @@
#define SS_ALG_AES 0
#define SS_ALG_DES (1 << 2)
#define SS_ALG_3DES (2 << 2)
+#define SS_ALG_PRNG (4 << 2)
#define SS_CTL_REG 0x00
#define SS_INT_CTL_REG 0x04
@@ -52,6 +54,8 @@
#define SS_FLOW0 BIT(30)
#define SS_FLOW1 BIT(31)
+#define SS_PRNG_CONTINUE BIT(18)
+
#define MAX_SG 8
#define MAXFLOW 2
@@ -61,6 +65,9 @@
#define SS_DIE_ID_SHIFT 20
#define SS_DIE_ID_MASK 0x07
+#define PRNG_DATA_SIZE (160 / 8)
+#define PRNG_SEED_SIZE DIV_ROUND_UP(175, 8)
+
/*
* struct ss_clock - Describe clocks used by sun8i-ss
* @name: Name of clock needed by this variant
@@ -179,6 +186,16 @@ struct sun8i_cipher_tfm_ctx {
struct crypto_sync_skcipher *fallback_tfm;
};
+/*
+ * struct sun8i_ss_prng_ctx - context for PRNG TFM
+ * @seed: The seed to use
+ * @slen: The size of the seed
+ */
+struct sun8i_ss_rng_tfm_ctx {
+ void *seed;
+ unsigned int slen;
+};
+
/*
* struct sun8i_ss_alg_template - crypto_alg template
* @type: the CRYPTO_ALG_TYPE for this template
@@ -189,6 +206,7 @@ struct sun8i_cipher_tfm_ctx {
* @alg: one of sub struct must be used
* @stat_req: number of request done on this template
* @stat_fb: number of request which has fallbacked
+ * @stat_bytes: total data size done by this template
*/
struct sun8i_ss_alg_template {
u32 type;
@@ -197,10 +215,12 @@ struct sun8i_ss_alg_template {
struct sun8i_ss_dev *ss;
union {
struct skcipher_alg skcipher;
+ struct rng_alg rng;
} alg;
#ifdef CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG
unsigned long stat_req;
unsigned long stat_fb;
+ unsigned long stat_bytes;
#endif
};
@@ -218,3 +238,8 @@ int sun8i_ss_skencrypt(struct skcipher_request *areq);
int sun8i_ss_get_engine_number(struct sun8i_ss_dev *ss);
int sun8i_ss_run_task(struct sun8i_ss_dev *ss, struct sun8i_cipher_req_ctx *rctx, const char *name);
+int sun8i_ss_prng_generate(struct crypto_rng *tfm, const u8 *src,
+ unsigned int slen, u8 *dst, unsigned int dlen);
+int sun8i_ss_prng_seed(struct crypto_rng *tfm, const u8 *seed, unsigned int slen);
+int sun8i_ss_prng_init(struct crypto_tfm *tfm);
+void sun8i_ss_prng_exit(struct crypto_tfm *tfm);
--
2.26.2
next prev parent reply other threads:[~2020-06-21 19:32 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-21 19:30 [PATCH v3 00/14] crypto: allwinner: add xRNG and hashes Corentin Labbe
2020-06-21 19:30 ` [PATCH v3 01/14] crypto: sun8i-ss: Add SS_START define Corentin Labbe
2020-06-21 19:30 ` Corentin Labbe [this message]
2020-06-21 19:30 ` [PATCH v3 03/14] crypto: sun8i-ss: support hash algorithms Corentin Labbe
2020-06-21 21:06 ` kernel test robot
2020-06-21 21:06 ` kernel test robot
2020-06-21 19:30 ` [PATCH v3 04/14] crypto: sun8i-ss: fix a trivial typo Corentin Labbe
2020-06-21 19:30 ` [PATCH v3 05/14] crypto: sun8i-ss: Add more comment on some structures Corentin Labbe
2020-06-21 19:30 ` [PATCH v3 06/14] crypto: sun8i-ss: better debug printing Corentin Labbe
2020-06-21 19:31 ` [PATCH v3 07/14] crypto: sun8i-ce: move iv data to request context Corentin Labbe
2020-06-21 19:31 ` [PATCH v3 08/14] crypto: sun8i-ce: split into prepare/run/unprepare Corentin Labbe
2020-06-21 20:36 ` kernel test robot
2020-06-21 20:36 ` kernel test robot
2020-06-21 21:32 ` kernel test robot
2020-06-21 21:32 ` kernel test robot
2020-06-21 19:31 ` [PATCH v3 09/14] crypto: sun8i-ce: handle different error registers Corentin Labbe
2020-06-21 19:31 ` [PATCH v3 10/14] crypto: sun8i-ce: rename has_t_dlen_in_bytes to cipher_t_dlen_in_bytes Corentin Labbe
2020-06-21 19:31 ` [PATCH v3 11/14] crypto: sun8i-ce: support hash algorithms Corentin Labbe
2020-06-21 21:07 ` kernel test robot
2020-06-21 21:07 ` kernel test robot
2020-06-21 22:29 ` kernel test robot
2020-06-21 22:29 ` kernel test robot
2020-06-21 19:31 ` [PATCH v3 12/14] crypto: sun8i-ce: Add stat_bytes debugfs Corentin Labbe
2020-06-21 19:31 ` [PATCH v3 13/14] crypto: sun8i-ce: Add support for the PRNG Corentin Labbe
2020-06-21 21:56 ` kernel test robot
2020-06-21 21:56 ` kernel test robot
2020-06-21 23:38 ` kernel test robot
2020-06-21 23:38 ` kernel test robot
2020-06-21 19:31 ` [PATCH v3 14/14] crypto: sun8i-ce: Add support for the TRNG Corentin Labbe
2020-06-21 22:26 ` kernel test robot
2020-06-21 22:26 ` kernel test robot
2020-06-22 0:27 ` kernel test robot
2020-06-22 0:27 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1592767867-35982-3-git-send-email-clabbe@baylibre.com \
--to=clabbe@baylibre.com \
--cc=davem@davemloft.net \
--cc=herbert@gondor.apana.org.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-crypto@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@googlegroups.com \
--cc=mripard@kernel.org \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.