From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Linux 4.4.232
Date: Fri, 31 Jul 2020 19:15:53 +0200 [thread overview]
Message-ID: <15962157532752@kroah.com> (raw)
I'm announcing the release of the 4.4.232 kernel.
All users of the 4.4 kernel series must upgrade.
The updated 4.4.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.4.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 4 -
arch/arm64/kernel/debug-monitors.c | 4 -
arch/parisc/include/asm/atomic.h | 2
arch/x86/kernel/fpu/signal.c | 4 -
arch/x86/math-emu/wm_sqrt.S | 2
arch/xtensa/kernel/setup.c | 3 -
arch/xtensa/kernel/xtensa_ksyms.c | 4 -
drivers/base/regmap/regmap-debugfs.c | 6 ++
drivers/base/regmap/regmap.c | 2
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c | 4 -
drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm204.c | 4 -
drivers/net/ethernet/marvell/sky2.c | 2
drivers/net/ethernet/smsc/smc91x.c | 4 -
drivers/net/hippi/rrunner.c | 2
drivers/net/phy/dp83640.c | 4 +
drivers/net/usb/ax88172a.c | 1
drivers/net/wan/lapbether.c | 9 +++
drivers/net/wan/x25_asy.c | 21 +++++---
drivers/net/wireless/ath/ath9k/hif_usb.c | 52 ++++++++++++++++-----
drivers/net/wireless/ath/ath9k/hif_usb.h | 5 ++
drivers/pinctrl/pinctrl-amd.h | 2
drivers/scsi/scsi_transport_spi.c | 2
drivers/staging/comedi/drivers/addi_apci_1032.c | 20 +++++---
drivers/staging/comedi/drivers/addi_apci_1500.c | 24 +++++++--
drivers/staging/comedi/drivers/addi_apci_1564.c | 20 +++++---
drivers/staging/comedi/drivers/ni_6527.c | 2
drivers/staging/wlan-ng/prism2usb.c | 16 ++++++
drivers/tty/serial/8250/8250_core.c | 2
drivers/tty/serial/8250/8250_mtk.c | 18 +++++++
drivers/usb/gadget/udc/gr_udc.c | 7 ++
fs/btrfs/backref.c | 1
fs/btrfs/volumes.c | 8 +++
fs/cifs/inode.c | 10 ----
fs/nfs/direct.c | 13 +----
fs/nfs/file.c | 1
fs/xfs/libxfs/xfs_bmap.c | 2
include/linux/tcp.h | 5 +-
kernel/events/core.c | 5 ++
kernel/events/uprobes.c | 2
mm/memcontrol.c | 4 -
net/ax25/af_ax25.c | 10 +++-
net/core/net-sysfs.c | 2
net/ipv4/tcp_input.c | 11 ++--
net/ipv4/tcp_output.c | 13 +++--
net/ipv4/udp.c | 2
net/ipv6/ip6_gre.c | 11 ++--
net/ipv6/udp.c | 2
net/mac80211/rx.c | 26 ++++++++++
net/rxrpc/ar-output.c | 2
net/rxrpc/ar-recvmsg.c | 2
scripts/decode_stacktrace.sh | 4 -
sound/core/info.c | 4 +
sound/soc/codecs/rt5670.h | 2
tools/perf/builtin-script.c | 24 ++++-----
tools/perf/tests/attr.c | 4 -
tools/perf/tests/pmu.c | 2
tools/perf/util/annotate.c | 14 ++++-
tools/perf/util/cgroup.c | 2
tools/perf/util/pager.c | 5 +-
tools/perf/util/parse-events.c | 4 -
tools/perf/util/pmu.c | 2
tools/perf/util/probe-event.c | 21 ++++++--
tools/perf/util/srcline.c | 16 ++++++
63 files changed, 346 insertions(+), 142 deletions(-)
Arnaldo Carvalho de Melo (1):
perf annotate: Use asprintf when formatting objdump command line
Arnd Bergmann (1):
x86: math-emu: Fix up 'cmp' insn for clang ias
Ben Skeggs (1):
drm/nouveau/i2c/g94-: increase NV_PMGR_DP_AUXCTL_TRANSACTREQ timeout
Boris Burkov (1):
btrfs: fix mount failure caused by race with umount
Changbin Du (1):
perf: Make perf able to build with latest libbfd
Christophe JAILLET (1):
hippi: Fix a size used in a 'pci_free_consistent()' in an error handling path
Dan Carpenter (1):
AX.25: Prevent integer overflows in connect and sendmsg
David Howells (1):
rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATA
Eric Sandeen (1):
xfs: set format back to extents if xfs_bmap_extents_to_btree
Evgeny Novikov (1):
usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
Fangrui Song (1):
Makefile: Fix GCC_TOOLCHAIN_DIR prefix for Clang cross compilation
Filipe Manana (1):
btrfs: fix double free on ulist after backref resolution failure
George Kennedy (1):
ax88172a: fix ax88172a_unbind() failures
Greg Kroah-Hartman (1):
Linux 4.4.232
Hans de Goede (1):
ASoC: rt5670: Correct RT5670_LDO_SEL_MASK
Hugh Dickins (1):
mm/memcg: fix refcount error while moving and swapping
Ian Abbott (4):
staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support
staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift
staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift
Jacky Hu (1):
pinctrl: amd: fix npins for uart0 in kerncz_groups
Jiri Olsa (2):
perf/core: Fix locking for children siblings group read
perf tools: Fix snprint warnings for gcc 8
John David Anglin (1):
parisc: Add atomic64_set_release() define to avoid CPU soft lockups
Marc Kleine-Budde (1):
regmap: dev_get_regmap_match(): fix string comparison
Mark O'Donovan (1):
ath9k: Fix regression with Atheros 9271
Markus Theil (1):
mac80211: allow rx of mesh eapol frames with default rx key
Masami Hiramatsu (1):
perf probe: Fix to check blacklist address correctly
Max Filippov (2):
xtensa: fix __sync_fetch_and_{and,or}_4 declarations
xtensa: update *pos in cpuinfo_op.next
Miaohe Lin (1):
net: udp: Fix wrong clean up for IS_UDPLITE macro
Oleg Nesterov (1):
uprobes: Change handle_swbp() to send SIGTRAP with si_code=SI_KERNEL, to fix GDB regression
Olga Kornievskaia (1):
SUNRPC reverting d03727b248d0 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")
Peilin Ye (2):
AX.25: Fix out-of-bounds read in ax25_connect()
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
Peng Fan (1):
regmap: debugfs: check count when read regmap file
Pi-Hsun Shih (1):
scripts/decode_stacktrace: strip basepath from all paths
Qiujun Huang (1):
ath9k: Fix general protection fault in ath9k_hif_usb_rx_cb
Rustam Kovhaev (1):
staging: wlan-ng: properly check endpoint types
Sebastian Andrzej Siewior (1):
x86/fpu: Disable bottom halves while loading FPU registers
Serge Semin (1):
serial: 8250_mtk: Fix high-speed baud rates clamping
Sergey Organov (1):
net: dp83640: fix SIOCSHWTSTAMP to update the struct with actual configuration
Sergey Senozhatsky (1):
tools/lib/subcmd/pager.c: do not alias select() params
Steve French (1):
Revert "cifs: Fix the target file was deleted when rename failed."
Takashi Iwai (1):
ALSA: info: Drop WARN_ON() from buffer NULL sanity check
Tom Rix (2):
scsi: scsi_transport_spi: Fix function pointer check
net: sky2: initialize return of gm_phy_read
Wang Hai (1):
net: smc91x: Fix possible memory leak in smc_drv_probe()
Wei Yongjun (1):
ip6_gre: fix null-ptr-deref in ip6gre_init_net()
Will Deacon (1):
arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP
Xie He (2):
drivers/net/wan/lapbether: Fixed the value of hard_header_len
drivers/net/wan/x25_asy: Fix to make it work
Xiongfeng Wang (1):
net-sysfs: add a newline when printing 'tx_timeout' by sysfs
Yang Yingliang (1):
serial: 8250: fix null-ptr-deref in serial8250_start_tx()
Yuchung Cheng (1):
tcp: allow at most one TLP probe per flight
next reply other threads:[~2020-07-31 17:16 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-31 17:15 Greg Kroah-Hartman [this message]
2020-07-31 17:15 ` Linux 4.4.232 Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=15962157532752@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.