All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hongtao Wu <wuht06@gmail.com>
To: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Rob Herring <robh+dt@kernel.org>
Cc: Orson Zhai <orsonzhai@gmail.com>,
	Baolin Wang <baolin.wang7@gmail.com>,
	Chunyan Zhang <zhang.lyra@gmail.com>,
	linux-pci@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, Billows Wu <billows.wu@unisoc.com>
Subject: [PATCH 1/2] dt-bindings: PCI: sprd: Document Unisoc PCIe RC host controller
Date: Fri, 21 Aug 2020 17:51:48 +0800	[thread overview]
Message-ID: <1598003509-27896-2-git-send-email-wuht06@gmail.com> (raw)
In-Reply-To: <1598003509-27896-1-git-send-email-wuht06@gmail.com>

From: Billows Wu <billows.wu@unisoc.com>

This series adds PCIe bindings for Uisoc SoCs.
This controller is based on DesignWare PCIe IP.

Signed-off-by: Billows Wu <billows.wu@unisoc.com>
---
 .../devicetree/bindings/pci/sprd-pcie.yaml         | 88 ++++++++++++++++++++++
 1 file changed, 88 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/sprd-pcie.yaml

diff --git a/Documentation/devicetree/bindings/pci/sprd-pcie.yaml b/Documentation/devicetree/bindings/pci/sprd-pcie.yaml
new file mode 100644
index 0000000..6eab4b8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/sprd-pcie.yaml
@@ -0,0 +1,88 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/sprd-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SoC PCIe Host Controller Device Tree Bindings
+
+maintainers:
+  - Billows Wu <billows.wu@unisoc.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+  - $ref: "sprd-pcie.yaml#"
+
+properties:
+  compatible:
+    items:
+      - const: sprd,pcie
+      - const: sprd,pcie-ep
+
+  reg:
+    minItems: 2
+    maxItems: 3
+    items:
+      - description: Controller control and status registers.
+      - description: PCIe shadow registers.
+      - description: PCIe configuration registers.
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: cfg
+
+  ranges:
+    maxItems: 2
+
+  num-lanes:
+    maxItems: 1
+    description: Number of lanes to use for this port.
+
+  num-ib-windows:
+    maxItems: 1
+    description: Number of inbound windows to use for this port.
+
+  num-ob-windows:
+    maxItems: 1
+    description: Number of outbound windows to use for this port.
+
+  bus-range:
+    description: Range of bus numbers associated with this controller.
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - num-lanes
+  - ranges
+  - bus-range
+  - interrupts
+  - interrupt-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    pcie0@2b100000 {
+        compatible = "sprd,pcie", "snps,dw-pcie";
+        reg = <0x0 0x2b100000 0x0 0x2000>,
+              <0x2 0x00000000 0x0 0x2000>;
+        reg-names = "dbi", "config";
+        #address-cells = <3>;
+        #size-cells = <2>;
+        device_type = "pci";
+        ranges = <0x01000000 0x0 0x00000000 0x2 0x00002000 0x0 0x00010000
+                  0x03000000 0x0 0x10000000 0x2 0x10000000 0x1 0xefffffff>;
+        bus-range = <0  15>;
+        num-lanes = <1>;
+        num-viewport = <8>;
+        interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-names = "msi";
+    };
--
2.7.4


  reply	other threads:[~2020-08-21  9:52 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-21  9:51 [PATCH 0/2] PCI: Add new Unisoc PCIe driver Hongtao Wu
2020-08-21  9:51 ` Hongtao Wu [this message]
2020-08-21 22:11   ` [PATCH 1/2] dt-bindings: PCI: sprd: Document Unisoc PCIe RC host controller Rob Herring
2020-08-21  9:51 ` [PATCH 2/2] PCI: sprd: Add support for Unisoc SoCs' PCIe controller Hongtao Wu
2020-08-21 12:19   ` kernel test robot
2020-08-21 12:19     ` kernel test robot
2020-08-21 15:15   ` Randy Dunlap
2020-08-21 22:21   ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1598003509-27896-2-git-send-email-wuht06@gmail.com \
    --to=wuht06@gmail.com \
    --cc=baolin.wang7@gmail.com \
    --cc=billows.wu@unisoc.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=orsonzhai@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=zhang.lyra@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.