From: <gregkh@linuxfoundation.org>
To: hdegoede@redhat.com, gregkh@linuxfoundation.org,
heikki.krogerus@linux.intel.com, linux@roeck-us.net
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] usb: typec: ucsi: Hold con->lock for the entire duration of" failed to apply to 5.4-stable tree
Date: Mon, 31 Aug 2020 14:27:46 +0200 [thread overview]
Message-ID: <1598876866196148@kroah.com> (raw)
The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From bed97b30968ba354035a020989df0623e52b5536 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 9 Aug 2020 16:19:04 +0200
Subject: [PATCH] usb: typec: ucsi: Hold con->lock for the entire duration of
ucsi_register_port()
Commit 081da1325d35 ("usb: typec: ucsi: displayport: Fix a potential race
during registration") made the ucsi code hold con->lock in
ucsi_register_displayport(). But we really don't want any interactions
with the connector to run before the port-registration process is fully
complete.
This commit moves the taking of con->lock from ucsi_register_displayport()
into ucsi_register_port() to achieve this.
Cc: stable@vger.kernel.org
Fixes: 081da1325d35 ("usb: typec: ucsi: displayport: Fix a potential race during registration")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200809141904.4317-5-hdegoede@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
diff --git a/drivers/usb/typec/ucsi/displayport.c b/drivers/usb/typec/ucsi/displayport.c
index 048381c058a5..261131c9e37c 100644
--- a/drivers/usb/typec/ucsi/displayport.c
+++ b/drivers/usb/typec/ucsi/displayport.c
@@ -288,8 +288,6 @@ struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con,
struct typec_altmode *alt;
struct ucsi_dp *dp;
- mutex_lock(&con->lock);
-
/* We can't rely on the firmware with the capabilities. */
desc->vdo |= DP_CAP_DP_SIGNALING | DP_CAP_RECEPTACLE;
@@ -298,15 +296,12 @@ struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con,
desc->vdo |= all_assignments << 16;
alt = typec_port_register_altmode(con->port, desc);
- if (IS_ERR(alt)) {
- mutex_unlock(&con->lock);
+ if (IS_ERR(alt))
return alt;
- }
dp = devm_kzalloc(&alt->dev, sizeof(*dp), GFP_KERNEL);
if (!dp) {
typec_unregister_altmode(alt);
- mutex_unlock(&con->lock);
return ERR_PTR(-ENOMEM);
}
@@ -319,7 +314,5 @@ struct typec_altmode *ucsi_register_displayport(struct ucsi_connector *con,
alt->ops = &ucsi_displayport_ops;
typec_altmode_set_drvdata(alt, dp);
- mutex_unlock(&con->lock);
-
return alt;
}
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 8a35144211e5..e680fcfdee60 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -898,12 +898,15 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
con->num = index + 1;
con->ucsi = ucsi;
+ /* Delay other interactions with the con until registration is complete */
+ mutex_lock(&con->lock);
+
/* Get connector capability */
command = UCSI_GET_CONNECTOR_CAPABILITY;
command |= UCSI_CONNECTOR_NUMBER(con->num);
ret = ucsi_send_command(ucsi, command, &con->cap, sizeof(con->cap));
if (ret < 0)
- return ret;
+ goto out;
if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DRP)
cap->data = TYPEC_PORT_DRD;
@@ -935,26 +938,32 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
ret = ucsi_register_port_psy(con);
if (ret)
- return ret;
+ goto out;
/* Register the connector */
con->port = typec_register_port(ucsi->dev, cap);
- if (IS_ERR(con->port))
- return PTR_ERR(con->port);
+ if (IS_ERR(con->port)) {
+ ret = PTR_ERR(con->port);
+ goto out;
+ }
/* Alternate modes */
ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_CON);
- if (ret)
+ if (ret) {
dev_err(ucsi->dev, "con%d: failed to register alt modes\n",
con->num);
+ goto out;
+ }
/* Get the status */
command = UCSI_GET_CONNECTOR_STATUS | UCSI_CONNECTOR_NUMBER(con->num);
ret = ucsi_send_command(ucsi, command, &con->status, sizeof(con->status));
if (ret < 0) {
dev_err(ucsi->dev, "con%d: failed to get status\n", con->num);
- return 0;
+ ret = 0;
+ goto out;
}
+ ret = 0; /* ucsi_send_command() returns length on success */
switch (UCSI_CONSTAT_PARTNER_TYPE(con->status.flags)) {
case UCSI_CONSTAT_PARTNER_TYPE_UFP:
@@ -979,17 +988,21 @@ static int ucsi_register_port(struct ucsi *ucsi, int index)
if (con->partner) {
ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
- if (ret)
+ if (ret) {
dev_err(ucsi->dev,
"con%d: failed to register alternate modes\n",
con->num);
- else
+ ret = 0;
+ } else {
ucsi_altmode_update_active(con);
+ }
}
trace_ucsi_register_port(con->num, &con->status);
- return 0;
+out:
+ mutex_unlock(&con->lock);
+ return ret;
}
/**
reply other threads:[~2020-08-31 12:27 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1598876866196148@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=linux@roeck-us.net \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.