From: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
To: agross@kernel.org, bjorn.andersson@linaro.org,
lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org,
plai@codeaurora.org, bgoswami@codeaurora.org, perex@perex.cz,
tiwai@suse.com, srinivas.kandagatla@linaro.org,
rohitkr@codeaurora.org, linux-arm-msm@vger.kernel.org,
alsa-devel@alsa-project.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: V Sujith Kumar Reddy <vsujithk@codeaurora.org>,
Srinivasa Rao <srivasam@codeaurora.org>
Subject: [PATCH v11 7/7] ASoC: qcom: sc7180: Add support for audio over DP
Date: Thu, 8 Oct 2020 10:47:03 +0530 [thread overview]
Message-ID: <1602134223-2562-8-git-send-email-srivasam@codeaurora.org> (raw)
In-Reply-To: <1602134223-2562-1-git-send-email-srivasam@codeaurora.org>
From: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Add support for audio playback over DP in lpass
sc7180 platform driver. Update lpass_variant
structure for hdmi data configuaration.
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao <srivasam@codeaurora.org>
---
sound/soc/qcom/lpass-sc7180.c | 116 +++++++++++++++++++++++++++++++++++++-----
1 file changed, 102 insertions(+), 14 deletions(-)
diff --git a/sound/soc/qcom/lpass-sc7180.c b/sound/soc/qcom/lpass-sc7180.c
index a8a3d8f..c6292f9e 100644
--- a/sound/soc/qcom/lpass-sc7180.c
+++ b/sound/soc/qcom/lpass-sc7180.c
@@ -60,38 +60,65 @@ static struct snd_soc_dai_driver sc7180_lpass_cpu_dai_driver[] = {
.probe = &asoc_qcom_lpass_cpu_dai_probe,
.ops = &asoc_qcom_lpass_cpu_dai_ops,
},
+ [LPASS_DP_RX] = {
+ .id = LPASS_DP_RX,
+ .name = "Hdmi",
+ .playback = {
+ .stream_name = "Hdmi Playback",
+ .formats = SNDRV_PCM_FMTBIT_S24,
+ .rates = SNDRV_PCM_RATE_48000,
+ .rate_min = 48000,
+ .rate_max = 48000,
+ .channels_min = 2,
+ .channels_max = 2,
+ },
+ .ops = &asoc_qcom_lpass_hdmi_dai_ops,
+ },
};
static int sc7180_lpass_alloc_dma_channel(struct lpass_data *drvdata,
- int direction)
+ int direction, unsigned int dai_id)
{
struct lpass_variant *v = drvdata->variant;
int chan = 0;
- if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
- chan = find_first_zero_bit(&drvdata->dma_ch_bit_map,
- v->rdma_channels);
+ if (dai_id == LPASS_DP_RX) {
+ if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ chan = find_first_zero_bit(&drvdata->hdmi_dma_ch_bit_map,
+ v->hdmi_rdma_channels);
+
+ if (chan >= v->hdmi_rdma_channels)
+ return -EBUSY;
+ }
+ set_bit(chan, &drvdata->hdmi_dma_ch_bit_map);
+ } else {
+ if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ chan = find_first_zero_bit(&drvdata->dma_ch_bit_map,
+ v->rdma_channels);
if (chan >= v->rdma_channels)
return -EBUSY;
- } else {
- chan = find_next_zero_bit(&drvdata->dma_ch_bit_map,
+ } else {
+ chan = find_next_zero_bit(&drvdata->dma_ch_bit_map,
v->wrdma_channel_start +
v->wrdma_channels,
v->wrdma_channel_start);
- if (chan >= v->wrdma_channel_start + v->wrdma_channels)
- return -EBUSY;
- }
-
- set_bit(chan, &drvdata->dma_ch_bit_map);
+ if (chan >= v->wrdma_channel_start + v->wrdma_channels)
+ return -EBUSY;
+ }
+ set_bit(chan, &drvdata->dma_ch_bit_map);
+ }
return chan;
}
-static int sc7180_lpass_free_dma_channel(struct lpass_data *drvdata, int chan)
+static int sc7180_lpass_free_dma_channel(struct lpass_data *drvdata, int chan, unsigned int dai_id)
{
- clear_bit(chan, &drvdata->dma_ch_bit_map);
+ if (dai_id == LPASS_DP_RX)
+ clear_bit(chan, &drvdata->hdmi_dma_ch_bit_map);
+ else
+ clear_bit(chan, &drvdata->dma_ch_bit_map);
return 0;
}
@@ -144,6 +171,9 @@ static struct lpass_variant sc7180_data = {
.rdma_reg_base = 0xC000,
.rdma_reg_stride = 0x1000,
.rdma_channels = 5,
+ .hdmi_rdma_reg_base = 0x64000,
+ .hdmi_rdma_reg_stride = 0x1000,
+ .hdmi_rdma_channels = 4,
.dmactl_audif_start = 1,
.wrdma_reg_base = 0x18000,
.wrdma_reg_stride = 0x1000,
@@ -163,7 +193,7 @@ static struct lpass_variant sc7180_data = {
.rdma_dyncclk = REG_FIELD_ID(0xC000, 21, 21, 5, 0x1000),
.rdma_bursten = REG_FIELD_ID(0xC000, 20, 20, 5, 0x1000),
.rdma_wpscnt = REG_FIELD_ID(0xC000, 16, 19, 5, 0x1000),
- .rdma_intf = REG_FIELD_ID(0xC000, 12, 15, 5, 0x1000),
+ .rdma_intf = REG_FIELD_ID(0xC000, 12, 15, 5, 0x1000),
.rdma_fifowm = REG_FIELD_ID(0xC000, 1, 5, 5, 0x1000),
.rdma_enable = REG_FIELD_ID(0xC000, 0, 0, 5, 0x1000),
@@ -174,6 +204,64 @@ static struct lpass_variant sc7180_data = {
.wrdma_fifowm = REG_FIELD_ID(0x18000, 1, 5, 4, 0x1000),
.wrdma_enable = REG_FIELD_ID(0x18000, 0, 0, 4, 0x1000),
+ .hdmi_tx_ctl_addr = 0x1000,
+ .hdmi_legacy_addr = 0x1008,
+ .hdmi_vbit_addr = 0x610c0,
+ .hdmi_ch_lsb_addr = 0x61048,
+ .hdmi_ch_msb_addr = 0x6104c,
+ .ch_stride = 0x8,
+ .hdmi_parity_addr = 0x61034,
+ .hdmi_dmactl_addr = 0x61038,
+ .hdmi_dma_stride = 0x4,
+ .hdmi_DP_addr = 0x610c8,
+ .hdmi_sstream_addr = 0x6101c,
+ .hdmi_irq_reg_base = 0x63000,
+ .hdmi_irq_ports = 1,
+
+ .hdmi_rdma_dyncclk = REG_FIELD_ID(0x64000, 14, 14, 4, 0x1000),
+ .hdmi_rdma_bursten = REG_FIELD_ID(0x64000, 13, 13, 4, 0x1000),
+ .hdmi_rdma_burst8 = REG_FIELD_ID(0x64000, 15, 15, 4, 0x1000),
+ .hdmi_rdma_burst16 = REG_FIELD_ID(0x64000, 16, 16, 4, 0x1000),
+ .hdmi_rdma_dynburst = REG_FIELD_ID(0x64000, 18, 18, 4, 0x1000),
+ .hdmi_rdma_wpscnt = REG_FIELD_ID(0x64000, 10, 12, 4, 0x1000),
+ .hdmi_rdma_fifowm = REG_FIELD_ID(0x64000, 1, 5, 4, 0x1000),
+ .hdmi_rdma_enable = REG_FIELD_ID(0x64000, 0, 0, 4, 0x1000),
+
+ .sstream_en = REG_FIELD(0x6101c, 0, 0),
+ .dma_sel = REG_FIELD(0x6101c, 1, 2),
+ .auto_bbit_en = REG_FIELD(0x6101c, 3, 3),
+ .layout = REG_FIELD(0x6101c, 4, 4),
+ .layout_sp = REG_FIELD(0x6101c, 5, 8),
+ .set_sp_on_en = REG_FIELD(0x6101c, 10, 10),
+ .dp_audio = REG_FIELD(0x6101c, 11, 11),
+ .dp_staffing_en = REG_FIELD(0x6101c, 12, 12),
+ .dp_sp_b_hw_en = REG_FIELD(0x6101c, 13, 13),
+
+ .mute = REG_FIELD(0x610c8, 0, 0),
+ .as_sdp_cc = REG_FIELD(0x610c8, 1, 3),
+ .as_sdp_ct = REG_FIELD(0x610c8, 4, 7),
+ .aif_db4 = REG_FIELD(0x610c8, 8, 15),
+ .frequency = REG_FIELD(0x610c8, 16, 21),
+ .mst_index = REG_FIELD(0x610c8, 28, 29),
+ .dptx_index = REG_FIELD(0x610c8, 30, 31),
+
+ .soft_reset = REG_FIELD(0x1000, 31, 31),
+ .force_reset = REG_FIELD(0x1000, 30, 30),
+
+ .use_hw_chs = REG_FIELD(0x61038, 0, 0),
+ .use_hw_usr = REG_FIELD(0x61038, 1, 1),
+ .hw_chs_sel = REG_FIELD(0x61038, 2, 4),
+ .hw_usr_sel = REG_FIELD(0x61038, 5, 6),
+
+ .replace_vbit = REG_FIELD(0x610c0, 0, 0),
+ .vbit_stream = REG_FIELD(0x610c0, 1, 1),
+
+ .legacy_en = REG_FIELD(0x1008, 0, 0),
+ .calc_en = REG_FIELD(0x61034, 0, 0),
+ .lsb_bits = REG_FIELD(0x61048, 0, 31),
+ .msb_bits = REG_FIELD(0x6104c, 0, 31),
+
+
.clk_name = (const char*[]) {
"pcnoc-sway-clk",
"audio-core",
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.,
is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
next prev parent reply other threads:[~2020-10-08 5:21 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-08 5:16 [PATCH v11 0/7] Qualcomm's lpass-hdmi ASoC driver to support audio over dp port Srinivasa Rao Mandadapu
2020-10-08 5:16 ` [PATCH v11 1/7] ASoC: Add sc7180-lpass binding header hdmi define Srinivasa Rao Mandadapu
2020-10-08 5:16 ` [PATCH v11 2/7] ASoC: dt-bindings: Add dt binding for lpass hdmi Srinivasa Rao Mandadapu
2020-10-08 5:16 ` [PATCH v11 3/7] Asoc:qcom:lpass-cpu:Update dts property read API Srinivasa Rao Mandadapu
2020-10-08 5:17 ` [PATCH v11 4/7] Asoc: qcom: lpass:Update lpaif_dmactl members order Srinivasa Rao Mandadapu
2020-10-08 5:17 ` [PATCH v11 5/7] ASoC: qcom: Add support for lpass hdmi driver Srinivasa Rao Mandadapu
2020-10-08 5:37 ` Srinivas Kandagatla
2020-10-08 5:17 ` [PATCH v11 6/7] Asoc: qcom: lpass-platform : Increase buffer size Srinivasa Rao Mandadapu
2020-10-08 5:17 ` Srinivasa Rao Mandadapu [this message]
2020-10-08 5:37 ` [PATCH v11 0/7] Qualcomm's lpass-hdmi ASoC driver to support audio over dp port Srinivas Kandagatla
2021-01-13 20:08 ` Stephan Gerhold
2021-01-13 20:08 ` Stephan Gerhold
2021-01-13 22:24 ` Srinivas Kandagatla
2021-01-13 22:24 ` Srinivas Kandagatla
2021-01-14 7:59 ` Stephan Gerhold
2021-01-14 7:59 ` Stephan Gerhold
2020-10-08 22:01 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1602134223-2562-8-git-send-email-srivasam@codeaurora.org \
--to=srivasam@codeaurora.org \
--cc=agross@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@codeaurora.org \
--cc=bjorn.andersson@linaro.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lgirdwood@gmail.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=perex@perex.cz \
--cc=plai@codeaurora.org \
--cc=robh+dt@kernel.org \
--cc=rohitkr@codeaurora.org \
--cc=srinivas.kandagatla@linaro.org \
--cc=tiwai@suse.com \
--cc=vsujithk@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.