All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: hadess@hadess.net, gregkh@linuxfoundation.org, m.v.b@runbox.com,
	pany@fedoraproject.org, stable@vger.kernel.org,
	stern@rowland.harvard.edu
Subject: patch "usbcore: Check both id_table and match() when both available" added to usb-linus
Date: Wed, 28 Oct 2020 13:25:13 +0100	[thread overview]
Message-ID: <160388791323815@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    usbcore: Check both id_table and match() when both available

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


From 0942d59b0af46511d59dbf5bd69ec4a64d1a854c Mon Sep 17 00:00:00 2001
From: Bastien Nocera <hadess@hadess.net>
Date: Thu, 22 Oct 2020 09:55:20 -0400
Subject: usbcore: Check both id_table and match() when both available

From: Bastien Nocera <hadess@hadess.net>

When a USB device driver has both an id_table and a match() function, make
sure to check both to find a match, first matching the id_table, then
checking the match() function.

This makes it possible to have module autoloading done through the
id_table when devices are plugged in, before checking for further
device eligibility in the match() function.

Cc: <stable@vger.kernel.org> # 5.8
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Co-developed-by: M. Vefa Bicakci <m.v.b@runbox.com>
Tested-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Signed-off-by: M. Vefa Bicakci <m.v.b@runbox.com>
Tested-by: Pan (Pany) YUAN <pany@fedoraproject.org>
Link: https://lore.kernel.org/r/20201022135521.375211-2-m.v.b@runbox.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/core/driver.c  | 30 +++++++++++++++++++++---------
 drivers/usb/core/generic.c |  4 +---
 drivers/usb/core/usb.h     |  2 ++
 3 files changed, 24 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c
index 98b7449c11f3..4dfa44d6cc3c 100644
--- a/drivers/usb/core/driver.c
+++ b/drivers/usb/core/driver.c
@@ -839,6 +839,22 @@ const struct usb_device_id *usb_device_match_id(struct usb_device *udev,
 	return NULL;
 }
 
+bool usb_driver_applicable(struct usb_device *udev,
+			   struct usb_device_driver *udrv)
+{
+	if (udrv->id_table && udrv->match)
+		return usb_device_match_id(udev, udrv->id_table) != NULL &&
+		       udrv->match(udev);
+
+	if (udrv->id_table)
+		return usb_device_match_id(udev, udrv->id_table) != NULL;
+
+	if (udrv->match)
+		return udrv->match(udev);
+
+	return false;
+}
+
 static int usb_device_match(struct device *dev, struct device_driver *drv)
 {
 	/* devices and interfaces are handled separately */
@@ -853,17 +869,14 @@ static int usb_device_match(struct device *dev, struct device_driver *drv)
 		udev = to_usb_device(dev);
 		udrv = to_usb_device_driver(drv);
 
-		if (udrv->id_table)
-			return usb_device_match_id(udev, udrv->id_table) != NULL;
-
-		if (udrv->match)
-			return udrv->match(udev);
-
 		/* If the device driver under consideration does not have a
 		 * id_table or a match function, then let the driver's probe
 		 * function decide.
 		 */
-		return 1;
+		if (!udrv->id_table && !udrv->match)
+			return 1;
+
+		return usb_driver_applicable(udev, udrv);
 
 	} else if (is_usb_interface(dev)) {
 		struct usb_interface *intf;
@@ -941,8 +954,7 @@ static int __usb_bus_reprobe_drivers(struct device *dev, void *data)
 		return 0;
 
 	udev = to_usb_device(dev);
-	if (usb_device_match_id(udev, new_udriver->id_table) == NULL &&
-	    (!new_udriver->match || new_udriver->match(udev) == 0))
+	if (!usb_driver_applicable(udev, new_udriver))
 		return 0;
 
 	ret = device_reprobe(dev);
diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
index 22c887f5c497..26f9fb9f67ca 100644
--- a/drivers/usb/core/generic.c
+++ b/drivers/usb/core/generic.c
@@ -205,9 +205,7 @@ static int __check_for_non_generic_match(struct device_driver *drv, void *data)
 	udrv = to_usb_device_driver(drv);
 	if (udrv == &usb_generic_driver)
 		return 0;
-	if (usb_device_match_id(udev, udrv->id_table) != NULL)
-		return 1;
-	return (udrv->match && udrv->match(udev));
+	return usb_driver_applicable(udev, udrv);
 }
 
 static bool usb_generic_driver_match(struct usb_device *udev)
diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h
index c893f54a3420..82538daac8b8 100644
--- a/drivers/usb/core/usb.h
+++ b/drivers/usb/core/usb.h
@@ -74,6 +74,8 @@ extern int usb_match_device(struct usb_device *dev,
 			    const struct usb_device_id *id);
 extern const struct usb_device_id *usb_device_match_id(struct usb_device *udev,
 				const struct usb_device_id *id);
+extern bool usb_driver_applicable(struct usb_device *udev,
+				  struct usb_device_driver *udrv);
 extern void usb_forced_unbind_intf(struct usb_interface *intf);
 extern void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev);
 
-- 
2.29.1



                 reply	other threads:[~2020-10-29  0:55 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=160388791323815@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=hadess@hadess.net \
    --cc=m.v.b@runbox.com \
    --cc=pany@fedoraproject.org \
    --cc=stable@vger.kernel.org \
    --cc=stern@rowland.harvard.edu \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.