From: <gregkh@linuxfoundation.org>
To: johannes.thumshirn@wdc.com, dsterba@suse.com, josef@toxicpanda.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] btrfs: reschedule when cloning lots of extents" failed to apply to 4.4-stable tree
Date: Tue, 03 Nov 2020 14:56:59 +0100 [thread overview]
Message-ID: <1604411819131223@kroah.com> (raw)
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6b613cc97f0ace77f92f7bc112b8f6ad3f52baf8 Mon Sep 17 00:00:00 2001
From: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Date: Tue, 22 Sep 2020 17:27:29 +0900
Subject: [PATCH] btrfs: reschedule when cloning lots of extents
We have several occurrences of a soft lockup from fstest's generic/175
testcase, which look more or less like this one:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [xfs_io:10030]
Kernel panic - not syncing: softlockup: hung tasks
CPU: 0 PID: 10030 Comm: xfs_io Tainted: G L 5.9.0-rc5+ #768
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014
Call Trace:
<IRQ>
dump_stack+0x77/0xa0
panic+0xfa/0x2cb
watchdog_timer_fn.cold+0x85/0xa5
? lockup_detector_update_enable+0x50/0x50
__hrtimer_run_queues+0x99/0x4c0
? recalibrate_cpu_khz+0x10/0x10
hrtimer_run_queues+0x9f/0xb0
update_process_times+0x28/0x80
tick_handle_periodic+0x1b/0x60
__sysvec_apic_timer_interrupt+0x76/0x210
asm_call_on_stack+0x12/0x20
</IRQ>
sysvec_apic_timer_interrupt+0x7f/0x90
asm_sysvec_apic_timer_interrupt+0x12/0x20
RIP: 0010:btrfs_tree_unlock+0x91/0x1a0 [btrfs]
RSP: 0018:ffffc90007123a58 EFLAGS: 00000282
RAX: ffff8881cea2fbe0 RBX: ffff8881cea2fbe0 RCX: 0000000000000000
RDX: ffff8881d23fd200 RSI: ffffffff82045220 RDI: ffff8881cea2fba0
RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000032
R10: 0000160000000000 R11: 0000000000001000 R12: 0000000000001000
R13: ffff8882357fd5b0 R14: ffff88816fa76e70 R15: ffff8881cea2fad0
? btrfs_tree_unlock+0x15b/0x1a0 [btrfs]
btrfs_release_path+0x67/0x80 [btrfs]
btrfs_insert_replace_extent+0x177/0x2c0 [btrfs]
btrfs_replace_file_extents+0x472/0x7c0 [btrfs]
btrfs_clone+0x9ba/0xbd0 [btrfs]
btrfs_clone_files.isra.0+0xeb/0x140 [btrfs]
? file_update_time+0xcd/0x120
btrfs_remap_file_range+0x322/0x3b0 [btrfs]
do_clone_file_range+0xb7/0x1e0
vfs_clone_file_range+0x30/0xa0
ioctl_file_clone+0x8a/0xc0
do_vfs_ioctl+0x5b2/0x6f0
__x64_sys_ioctl+0x37/0xa0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f87977fc247
RSP: 002b:00007ffd51a2f6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f87977fc247
RDX: 00007ffd51a2f710 RSI: 000000004020940d RDI: 0000000000000003
RBP: 0000000000000004 R08: 00007ffd51a79080 R09: 0000000000000000
R10: 00005621f11352f2 R11: 0000000000000206 R12: 0000000000000000
R13: 0000000000000000 R14: 00005621f128b958 R15: 0000000080000000
Kernel Offset: disabled
---[ end Kernel panic - not syncing: softlockup: hung tasks ]---
All of these lockup reports have the call chain btrfs_clone_files() ->
btrfs_clone() in common. btrfs_clone_files() calls btrfs_clone() with
both source and destination extents locked and loops over the source
extent to create the clones.
Conditionally reschedule in the btrfs_clone() loop, to give some time back
to other processes.
CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
diff --git a/fs/btrfs/reflink.c b/fs/btrfs/reflink.c
index 39b3269e5760..99aa87c08912 100644
--- a/fs/btrfs/reflink.c
+++ b/fs/btrfs/reflink.c
@@ -520,6 +520,8 @@ static int btrfs_clone(struct inode *src, struct inode *inode,
ret = -EINTR;
goto out;
}
+
+ cond_resched();
}
ret = 0;
reply other threads:[~2020-11-03 13:56 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1604411819131223@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=dsterba@suse.com \
--cc=johannes.thumshirn@wdc.com \
--cc=josef@toxicpanda.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.