From: <gregkh@linuxfoundation.org>
To: krzk@kernel.org, o.rempel@pengutronix.de, stable@vger.kernel.org,
wsa@kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] i2c: imx: Fix external abort on interrupt in exit paths" failed to apply to 4.4-stable tree
Date: Tue, 03 Nov 2020 16:42:38 +0100 [thread overview]
Message-ID: <160441815892158@kroah.com> (raw)
The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From e50e4f0b85be308a01b830c5fbdffc657e1a6dd0 Mon Sep 17 00:00:00 2001
From: Krzysztof Kozlowski <krzk@kernel.org>
Date: Sun, 20 Sep 2020 23:12:38 +0200
Subject: [PATCH] i2c: imx: Fix external abort on interrupt in exit paths
If interrupt comes late, during probe error path or device remove (could
be triggered with CONFIG_DEBUG_SHIRQ), the interrupt handler
i2c_imx_isr() will access registers with the clock being disabled. This
leads to external abort on non-linefetch on Toradex Colibri VF50 module
(with Vybrid VF5xx):
Unhandled fault: external abort on non-linefetch (0x1008) at 0x8882d003
Internal error: : 1008 [#1] ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 5.7.0 #607
Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree)
(i2c_imx_isr) from [<8017009c>] (free_irq+0x25c/0x3b0)
(free_irq) from [<805844ec>] (release_nodes+0x178/0x284)
(release_nodes) from [<80580030>] (really_probe+0x10c/0x348)
(really_probe) from [<80580380>] (driver_probe_device+0x60/0x170)
(driver_probe_device) from [<80580630>] (device_driver_attach+0x58/0x60)
(device_driver_attach) from [<805806bc>] (__driver_attach+0x84/0xc0)
(__driver_attach) from [<8057e228>] (bus_for_each_dev+0x68/0xb4)
(bus_for_each_dev) from [<8057f3ec>] (bus_add_driver+0x144/0x1ec)
(bus_add_driver) from [<80581320>] (driver_register+0x78/0x110)
(driver_register) from [<8010213c>] (do_one_initcall+0xa8/0x2f4)
(do_one_initcall) from [<80c0100c>] (kernel_init_freeable+0x178/0x1dc)
(kernel_init_freeable) from [<80807048>] (kernel_init+0x8/0x110)
(kernel_init) from [<80100114>] (ret_from_fork+0x14/0x20)
Additionally, the i2c_imx_isr() could wake up the wait queue
(imx_i2c_struct->queue) before its initialization happens.
The resource-managed framework should not be used for interrupt handling,
because the resource will be released too late - after disabling clocks.
The interrupt handler is not prepared for such case.
Fixes: 1c4b6c3bcf30 ("i2c: imx: implement bus recovery")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 63f4367c312b..c98529c76348 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1169,14 +1169,6 @@ static int i2c_imx_probe(struct platform_device *pdev)
return ret;
}
- /* Request IRQ */
- ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, IRQF_SHARED,
- pdev->name, i2c_imx);
- if (ret) {
- dev_err(&pdev->dev, "can't claim irq %d\n", irq);
- goto clk_disable;
- }
-
/* Init queue */
init_waitqueue_head(&i2c_imx->queue);
@@ -1195,6 +1187,14 @@ static int i2c_imx_probe(struct platform_device *pdev)
if (ret < 0)
goto rpm_disable;
+ /* Request IRQ */
+ ret = request_threaded_irq(irq, i2c_imx_isr, NULL, IRQF_SHARED,
+ pdev->name, i2c_imx);
+ if (ret) {
+ dev_err(&pdev->dev, "can't claim irq %d\n", irq);
+ goto rpm_disable;
+ }
+
/* Set up clock divider */
i2c_imx->bitrate = I2C_MAX_STANDARD_MODE_FREQ;
ret = of_property_read_u32(pdev->dev.of_node,
@@ -1237,13 +1237,12 @@ static int i2c_imx_probe(struct platform_device *pdev)
clk_notifier_unregister:
clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
+ free_irq(irq, i2c_imx);
rpm_disable:
pm_runtime_put_noidle(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_set_suspended(&pdev->dev);
pm_runtime_dont_use_autosuspend(&pdev->dev);
-
-clk_disable:
clk_disable_unprepare(i2c_imx->clk);
return ret;
}
@@ -1251,7 +1250,7 @@ static int i2c_imx_probe(struct platform_device *pdev)
static int i2c_imx_remove(struct platform_device *pdev)
{
struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
- int ret;
+ int irq, ret;
ret = pm_runtime_get_sync(&pdev->dev);
if (ret < 0)
@@ -1271,6 +1270,9 @@ static int i2c_imx_remove(struct platform_device *pdev)
imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
clk_notifier_unregister(i2c_imx->clk, &i2c_imx->clk_change_nb);
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0)
+ free_irq(irq, i2c_imx);
clk_disable_unprepare(i2c_imx->clk);
pm_runtime_put_noidle(&pdev->dev);
reply other threads:[~2020-11-03 15:41 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=160441815892158@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=krzk@kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=stable@vger.kernel.org \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.