From: Patrick DELAUNAY <patrick.delaunay@st.com>
To: u-boot@lists.denx.de
Subject: [PULL] Pull request for u-boot master = u-boot-stm32-20201125
Date: Wed, 25 Nov 2020 14:55:02 +0000 [thread overview]
Message-ID: <1606316102821.13856@st.com> (raw)
Hi Tom,
Please pull the STM32 related patches for u-boot/master, v2021.01: u-boot-stm32-20201125
- STM32 MCU's DT update
- Add DHCOM based STM32MP15x PicoITX board
- Correct ALIGN macro usage for on syram for SPL dcache support
- Fixes on DHCOM: uSD card-detect GPIO and Drop QSPI CS2
- Fix compilation issue for spl_mmc_boot_partition
- Fix MTD partitions for serial boot
- Add support of MCU HOLD BOOT with reset for stm32 remoteproc
(prepare alligneent with kernel DT)
- Correct bias information and support in STM32 soc and STMFX
- Support optional vbus in usbphyc
- Update FIT examples to avoid kernel zImage relocation before decompression
CI status:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm/-/commits/u-boot-stm32-20201125
Thanks,
Patrick
git request-pull origin/master https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git u-boot-stm32-20201125
The following changes since commit d361eafe82bfbf90ab0a592ae59daef99faee5ec:
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-usb (2020-11-22 11:00:11 -0500)
are available in the Git repository at:
https://gitlab.denx.de/u-boot/custodians/u-boot-stm.git tags/u-boot-stm32-20201125
for you to fetch changes up to 60a2dd6aa20f6c0938856b764e7ebdee722d998e:
board: st: stm32mp1: update load address for FIT examples (2020-11-25 14:27:19 +0100)
----------------------------------------------------------------
- STM32 MCU's DT update
- Add DHCOM based STM32MP15x PicoITX board
- Correct ALIGN macro usage for on syram for SPL dcache support
- Fixes on DHCOM: uSD card-detect GPIO and Drop QSPI CS2
- Fix compilation issue for spl_mmc_boot_partition
- Fix MTD partitions for serial boot
- Add support of MCU HOLD BOOT with reset for stm32 remoteproc
(prepare alligneent with kernel DT)
- Correct bias information and support in STM32 soc and STMFX
- Support optional vbus in usbphyc
- Update FIT examples to avoid kernel zImage relocation before decompression
----------------------------------------------------------------
Marek Vasut (3):
ARM: dts: stm32: Add DHCOM based PicoITX board
ARM: dts: stm32: Fix uSD card-detect GPIO on DHCOM
ARM: dts: stm32: Drop QSPI CS2 on DHCOM
Patrice Chotard (4):
ARM: dts: sync armv7-m.dtsi with kernel v5.10-rc1
ARM: dts: stm32: DT sync with kernel v5.10-rc1 for MCU's boards
ARM: dts: stm32: Fix timer initialization for stm32 MCU's board
ARM: dts: stm32: Fix typo in stm32h7-u-boot.dtsi
Patrick Delaunay (11):
arm: stm32mp: correct the ALIGN macro usage
board: stm32mp1: no MTD partitions fixup for serial boot
reset: stm32: Add support of MCU HOLD BOOT
remoteproc: stm32: use reset for hold boot
remoteproc: stm32: update error management in stm32_copro_start
pinctrl: stm32: display bias information for all pins
gpio: stm32: correct the bias management
pinctrl: stmfx: update pincontrol and gpio device name
pinctrl: stmfx: update pin name
phy: stm32: usbphyc: manage optional vbus regulator on phy_power_on/off
board: st: stm32mp1: update load address for FIT examples
Richard Genoud (1):
SPL: stm32mp1: fix spl_mmc_boot_partition not defined
arch/arm/dts/Makefile | 1 +
arch/arm/dts/armv7-m.dtsi | 4 +--
arch/arm/dts/stm32429i-eval-u-boot.dtsi | 6 ++++-
arch/arm/dts/stm32429i-eval.dts | 21 ++++++++++-----
arch/arm/dts/stm32746g-eval-u-boot.dtsi | 4 +--
arch/arm/dts/stm32746g-eval.dts | 13 +++++-----
arch/arm/dts/stm32f4-pinctrl.dtsi | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++----------
arch/arm/dts/stm32f429-disco-u-boot.dtsi | 6 ++++-
arch/arm/dts/stm32f429-disco.dts | 99 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++---
arch/arm/dts/stm32f429.dtsi | 30 +++++++++++++++-------
arch/arm/dts/stm32f469-disco-u-boot.dtsi | 26 +++++++++++--------
arch/arm/dts/stm32f469-disco.dts | 19 +++++++++-----
arch/arm/dts/stm32f469.dtsi | 1 -
arch/arm/dts/stm32f7-pinctrl.dtsi | 22 ++++++++--------
arch/arm/dts/stm32f7-u-boot.dtsi | 3 +--
arch/arm/dts/stm32f746-disco-u-boot.dtsi | 8 ++----
arch/arm/dts/stm32f746-disco.dts | 2 +-
arch/arm/dts/stm32f746.dtsi | 12 ++++-----
arch/arm/dts/stm32f769-disco-u-boot.dtsi | 4 +--
arch/arm/dts/stm32f769-disco.dts | 6 ++---
arch/arm/dts/stm32h7-u-boot.dtsi | 6 ++++-
arch/arm/dts/stm32h743-pinctrl.dtsi | 10 ++++----
arch/arm/dts/stm32h743.dtsi | 37 +++++++++++++++++++--------
arch/arm/dts/stm32h743i-disco.dts | 2 +-
arch/arm/dts/stm32h743i-eval.dts | 2 +-
arch/arm/dts/stm32mp15-u-boot.dtsi | 7 +++++
arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi | 14 ++++++++++
arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts | 93 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
arch/arm/dts/stm32mp15xx-dhcom.dtsi | 15 +++--------
arch/arm/mach-stm32mp/cpu.c | 4 +--
arch/arm/mach-stm32mp/spl.c | 2 ++
board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its | 22 ++++++++++++++++
board/st/stm32mp1/fit_copro_kernel_dtb.its | 18 +++++++++++--
board/st/stm32mp1/fit_kernel_dtb.its | 6 ++---
board/st/stm32mp1/stm32mp1.c | 11 +++++---
configs/stm32mp15_dhcom_basic_defconfig | 2 +-
doc/device-tree-bindings/phy/phy-stm32-usbphyc.txt | 2 ++
drivers/gpio/stm32_gpio.c | 28 ++++++++++----------
drivers/phy/phy-stm32-usbphyc.c | 33 ++++++++++++++++--------
drivers/pinctrl/pinctrl-stmfx.c | 13 ++++++----
drivers/pinctrl/pinctrl_stm32.c | 24 ++++++++---------
drivers/remoteproc/stm32_copro.c | 108 +++++++++++++++++++++++------------------------------------------------------
drivers/reset/stm32-reset.c | 17 +++++++++---
include/dt-bindings/reset/stm32mp1-resets.h | 1 +
44 files changed, 611 insertions(+), 260 deletions(-)
create mode 100644 arch/arm/dts/stm32mp15xx-dhcom-picoitx-u-boot.dtsi
create mode 100644 arch/arm/dts/stm32mp15xx-dhcom-picoitx.dts
next reply other threads:[~2020-11-25 14:55 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-25 14:55 Patrick DELAUNAY [this message]
2020-11-26 3:52 ` [PULL] Pull request for u-boot master = u-boot-stm32-20201125 Tom Rini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1606316102821.13856@st.com \
--to=patrick.delaunay@st.com \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.