From: <gregkh@linuxfoundation.org>
To: ceggers@arri.de, o.rempel@pengutronix.de,
u.kleine-koenig@pengutronix.de, wsa@kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] i2c: imx: Fix reset of I2SR_IAL flag" failed to apply to 4.14-stable tree
Date: Wed, 09 Dec 2020 09:31:34 +0100 [thread overview]
Message-ID: <1607502694173138@kroah.com> (raw)
The patch below does not apply to the 4.14-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 384a9565f70a876c2e78e58c5ca0bbf0547e4f6d Mon Sep 17 00:00:00 2001
From: Christian Eggers <ceggers@arri.de>
Date: Fri, 9 Oct 2020 13:03:18 +0200
Subject: [PATCH] i2c: imx: Fix reset of I2SR_IAL flag
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
According to the "VFxxx Controller Reference Manual" (and the comment
block starting at line 97), Vybrid requires writing a one for clearing
an interrupt flag. Syncing the method for clearing I2SR_IIF in
i2c_imx_isr().
Signed-off-by: Christian Eggers <ceggers@arri.de>
Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks")
Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: stable@vger.kernel.org
Signed-off-by: Wolfram Sang <wsa@kernel.org>
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index c98529c76348..39e98d216016 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -412,6 +412,19 @@ static void i2c_imx_dma_free(struct imx_i2c_struct *i2c_imx)
dma->chan_using = NULL;
}
+static void i2c_imx_clear_irq(struct imx_i2c_struct *i2c_imx, unsigned int bits)
+{
+ unsigned int temp;
+
+ /*
+ * i2sr_clr_opcode is the value to clear all interrupts. Here we want to
+ * clear only <bits>, so we write ~i2sr_clr_opcode with just <bits>
+ * toggled. This is required because i.MX needs W0C and Vybrid uses W1C.
+ */
+ temp = ~i2c_imx->hwdata->i2sr_clr_opcode ^ bits;
+ imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+}
+
static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool atomic)
{
unsigned long orig_jiffies = jiffies;
@@ -424,8 +437,7 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy, bool a
/* check for arbitration lost */
if (temp & I2SR_IAL) {
- temp &= ~I2SR_IAL;
- imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+ i2c_imx_clear_irq(i2c_imx, I2SR_IAL);
return -EAGAIN;
}
@@ -469,7 +481,7 @@ static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx, bool atomic)
*/
readb_poll_timeout_atomic(addr, regval, regval & I2SR_IIF, 5, 1000 + 100);
i2c_imx->i2csr = regval;
- imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
+ i2c_imx_clear_irq(i2c_imx, I2SR_IIF | I2SR_IAL);
} else {
wait_event_timeout(i2c_imx->queue, i2c_imx->i2csr & I2SR_IIF, HZ / 10);
}
@@ -623,9 +635,7 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
if (temp & I2SR_IIF) {
/* save status register */
i2c_imx->i2csr = temp;
- temp &= ~I2SR_IIF;
- temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
- imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
+ i2c_imx_clear_irq(i2c_imx, I2SR_IIF);
wake_up(&i2c_imx->queue);
return IRQ_HANDLED;
}
next reply other threads:[~2020-12-09 15:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-09 8:31 gregkh [this message]
-- strict thread matches above, loose matches on Subject: below --
2020-10-11 8:40 FAILED: patch "[PATCH] i2c: imx: Fix reset of I2SR_IAL flag" failed to apply to 4.14-stable tree gregkh
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1607502694173138@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=ceggers@arri.de \
--cc=o.rempel@pengutronix.de \
--cc=stable@vger.kernel.org \
--cc=u.kleine-koenig@pengutronix.de \
--cc=wsa@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.