All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: mhiramat@kernel.org, bp@suse.de, keescook@chromium.org,
	srikar@linux.vnet.ibm.com
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] x86/uprobes: Do not use prefixes.nbytes when looping over" failed to apply to 4.4-stable tree
Date: Wed, 09 Dec 2020 10:34:13 +0100	[thread overview]
Message-ID: <1607506453129233@kroah.com> (raw)


The patch below does not apply to the 4.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From 4e9a5ae8df5b3365183150f6df49e49dece80d8c Mon Sep 17 00:00:00 2001
From: Masami Hiramatsu <mhiramat@kernel.org>
Date: Thu, 3 Dec 2020 13:50:37 +0900
Subject: [PATCH] x86/uprobes: Do not use prefixes.nbytes when looping over
 prefixes.bytes

Since insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a prefix is repeated, the proper check must
be

  insn.prefixes.bytes[i] != 0 and i < 4

instead of using insn.prefixes.nbytes.

Introduce a for_each_insn_prefix() macro for this purpose. Debugged by
Kees Cook <keescook@chromium.org>.

 [ bp: Massage commit message, sync with the respective header in tools/
   and drop "we". ]

Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Reported-by: syzbot+9b64b619f10f19d19a7c@syzkaller.appspotmail.com
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/160697103739.3146288.7437620795200799020.stgit@devnote2

diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h
index 5c1ae3eff9d4..a8c3d284fa46 100644
--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -201,6 +201,21 @@ static inline int insn_offset_immediate(struct insn *insn)
 	return insn_offset_displacement(insn) + insn->displacement.nbytes;
 }
 
+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx:  Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than 4 if some prefixes
+ * are repeated, it cannot be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix)	\
+	for (idx = 0; idx < ARRAY_SIZE(insn->prefixes.bytes) && (prefix = insn->prefixes.bytes[idx]) != 0; idx++)
+
 #define POP_SS_OPCODE 0x1f
 #define MOV_SREG_OPCODE 0x8e
 
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 3fdaa042823d..138bdb1fd136 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -255,12 +255,13 @@ static volatile u32 good_2byte_insns[256 / 32] = {
 
 static bool is_prefix_bad(struct insn *insn)
 {
+	insn_byte_t p;
 	int i;
 
-	for (i = 0; i < insn->prefixes.nbytes; i++) {
+	for_each_insn_prefix(insn, i, p) {
 		insn_attr_t attr;
 
-		attr = inat_get_opcode_attribute(insn->prefixes.bytes[i]);
+		attr = inat_get_opcode_attribute(p);
 		switch (attr) {
 		case INAT_MAKE_PREFIX(INAT_PFX_ES):
 		case INAT_MAKE_PREFIX(INAT_PFX_CS):
@@ -715,6 +716,7 @@ static const struct uprobe_xol_ops push_xol_ops = {
 static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
 {
 	u8 opc1 = OPCODE1(insn);
+	insn_byte_t p;
 	int i;
 
 	switch (opc1) {
@@ -746,8 +748,8 @@ static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
 	 * Intel and AMD behavior differ in 64-bit mode: Intel ignores 66 prefix.
 	 * No one uses these insns, reject any branch insns with such prefix.
 	 */
-	for (i = 0; i < insn->prefixes.nbytes; i++) {
-		if (insn->prefixes.bytes[i] == 0x66)
+	for_each_insn_prefix(insn, i, p) {
+		if (p == 0x66)
 			return -ENOTSUPP;
 	}
 
diff --git a/tools/arch/x86/include/asm/insn.h b/tools/arch/x86/include/asm/insn.h
index 568854b14d0a..52c6262e6bfd 100644
--- a/tools/arch/x86/include/asm/insn.h
+++ b/tools/arch/x86/include/asm/insn.h
@@ -201,6 +201,21 @@ static inline int insn_offset_immediate(struct insn *insn)
 	return insn_offset_displacement(insn) + insn->displacement.nbytes;
 }
 
+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx:  Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than 4 if some prefixes
+ * are repeated, it cannot be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix)	\
+	for (idx = 0; idx < ARRAY_SIZE(insn->prefixes.bytes) && (prefix = insn->prefixes.bytes[idx]) != 0; idx++)
+
 #define POP_SS_OPCODE 0x1f
 #define MOV_SREG_OPCODE 0x8e
 


             reply	other threads:[~2020-12-09 15:53 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-09  9:34 gregkh [this message]
2020-12-10 13:29 ` FAILED: patch "[PATCH] x86/uprobes: Do not use prefixes.nbytes when looping over" failed to apply to 4.4-stable tree Sudip Mukherjee
2020-12-10 14:08   ` Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1607506453129233@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=bp@suse.de \
    --cc=keescook@chromium.org \
    --cc=mhiramat@kernel.org \
    --cc=srikar@linux.vnet.ibm.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.