All of lore.kernel.org
 help / color / mirror / Atom feed
From: Can Guo <cang@codeaurora.org>
To: asutoshd@codeaurora.org, nguyenb@codeaurora.org,
	hongwus@codeaurora.org, rnayak@codeaurora.org,
	linux-scsi@vger.kernel.org, kernel-team@android.com,
	saravanak@google.com, salyzyn@google.com, cang@codeaurora.org
Cc: Alim Akhtar <alim.akhtar@samsung.com>,
	Avri Altman <avri.altman@wdc.com>,
	"James E.J. Bottomley" <jejb@linux.ibm.com>,
	"Martin K. Petersen" <martin.petersen@oracle.com>,
	Stanley Chu <stanley.chu@mediatek.com>,
	Bean Huo <beanhuo@micron.com>,
	Bart Van Assche <bvanassche@acm.org>,
	Satya Tangirala <satyat@google.com>,
	linux-kernel@vger.kernel.org (open list)
Subject: [PATCH v4 2/3] scsi: ufs: Clean up ufshcd_exit_clk_scaling/gating()
Date: Sun, 13 Dec 2020 08:31:43 -0800	[thread overview]
Message-ID: <1607877104-8916-3-git-send-email-cang@codeaurora.org> (raw)
In-Reply-To: <1607877104-8916-1-git-send-email-cang@codeaurora.org>

ufshcd_hba_exit() is always called after ufshcd_exit_clk_scaling() and
ufshcd_exit_clk_gating(), so move ufshcd_exit_clk_scaling/gating() to
ufshcd_hba_exit().

Signed-off-by: Can Guo <cang@codeaurora.org>
---
 drivers/scsi/ufs/ufshcd.c | 32 +++++++++++++++-----------------
 drivers/scsi/ufs/ufshcd.h |  4 ++++
 2 files changed, 19 insertions(+), 17 deletions(-)

diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 4ccdd2b..80f82cb 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -1857,11 +1857,14 @@ static void ufshcd_init_clk_scaling(struct ufs_hba *hba)
 	snprintf(wq_name, sizeof(wq_name), "ufs_clkscaling_%d",
 		 hba->host->host_no);
 	hba->clk_scaling.workq = create_singlethread_workqueue(wq_name);
+
+	hba->clk_scaling.is_initialized = true;
 }
 
 static void ufshcd_exit_clk_scaling(struct ufs_hba *hba)
 {
-	if (!ufshcd_is_clkscaling_supported(hba))
+	if (!ufshcd_is_clkscaling_supported(hba) ||
+	    !hba->clk_scaling.is_initialized)
 		return;
 
 	if (hba->devfreq)
@@ -1905,12 +1908,16 @@ static void ufshcd_init_clk_gating(struct ufs_hba *hba)
 	hba->clk_gating.enable_attr.attr.mode = 0644;
 	if (device_create_file(hba->dev, &hba->clk_gating.enable_attr))
 		dev_err(hba->dev, "Failed to create sysfs for clkgate_enable\n");
+
+	hba->clk_gating.is_initialized = true;
 }
 
 static void ufshcd_exit_clk_gating(struct ufs_hba *hba)
 {
-	if (!ufshcd_is_clkgating_allowed(hba))
+	if (!ufshcd_is_clkgating_allowed(hba) ||
+	    !hba->clk_gating.is_initialized)
 		return;
+
 	device_remove_file(hba->dev, &hba->clk_gating.delay_attr);
 	device_remove_file(hba->dev, &hba->clk_gating.enable_attr);
 	cancel_work_sync(&hba->clk_gating.ungate_work);
@@ -7775,7 +7782,6 @@ static void ufshcd_async_scan(void *data, async_cookie_t cookie)
 	 */
 	if (ret) {
 		pm_runtime_put_sync(hba->dev);
-		ufshcd_exit_clk_scaling(hba);
 		ufshcd_hba_exit(hba);
 	}
 }
@@ -8212,12 +8218,12 @@ static int ufshcd_hba_init(struct ufs_hba *hba)
 static void ufshcd_hba_exit(struct ufs_hba *hba)
 {
 	if (hba->is_powered) {
+		ufshcd_exit_clk_scaling(hba);
+		ufshcd_exit_clk_gating(hba);
+		if (hba->eh_wq)
+			destroy_workqueue(hba->eh_wq);
 		ufshcd_variant_hba_exit(hba);
 		ufshcd_setup_vreg(hba, false);
-		ufshcd_suspend_clkscaling(hba);
-		if (ufshcd_is_clkscaling_supported(hba))
-			if (hba->devfreq)
-				ufshcd_suspend_clkscaling(hba);
 		ufshcd_setup_clocks(hba, false);
 		ufshcd_setup_hba_vreg(hba, false);
 		hba->is_powered = false;
@@ -8966,13 +8972,9 @@ void ufshcd_remove(struct ufs_hba *hba)
 	blk_mq_free_tag_set(&hba->tmf_tag_set);
 	blk_cleanup_queue(hba->cmd_queue);
 	scsi_remove_host(hba->host);
-	destroy_workqueue(hba->eh_wq);
 	/* disable interrupts */
 	ufshcd_disable_intr(hba, hba->intr_mask);
 	ufshcd_hba_stop(hba);
-
-	ufshcd_exit_clk_scaling(hba);
-	ufshcd_exit_clk_gating(hba);
 	ufshcd_hba_exit(hba);
 }
 EXPORT_SYMBOL_GPL(ufshcd_remove);
@@ -9171,7 +9173,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	err = devm_request_irq(dev, irq, ufshcd_intr, IRQF_SHARED, UFSHCD, hba);
 	if (err) {
 		dev_err(hba->dev, "request irq failed\n");
-		goto exit_gating;
+		goto out_disable;
 	} else {
 		hba->is_irq_enabled = true;
 	}
@@ -9179,7 +9181,7 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	err = scsi_add_host(host, hba->dev);
 	if (err) {
 		dev_err(hba->dev, "scsi_add_host failed\n");
-		goto exit_gating;
+		goto out_disable;
 	}
 
 	hba->cmd_queue = blk_mq_init_queue(&hba->host->tag_set);
@@ -9262,10 +9264,6 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
 	blk_cleanup_queue(hba->cmd_queue);
 out_remove_scsi_host:
 	scsi_remove_host(hba->host);
-exit_gating:
-	ufshcd_exit_clk_scaling(hba);
-	ufshcd_exit_clk_gating(hba);
-	destroy_workqueue(hba->eh_wq);
 out_disable:
 	hba->is_irq_enabled = false;
 	ufshcd_hba_exit(hba);
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 9fcecba..3c57847 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -347,6 +347,7 @@ enum clk_gating_state {
  * @delay_attr: sysfs attribute to control delay_attr
  * @enable_attr: sysfs attribute to enable/disable clock gating
  * @is_enabled: Indicates the current status of clock gating
+ * @is_initialized: Indicates whether clock gating is initialized or not
  * @active_reqs: number of requests that are pending and should be waited for
  * completion before gating clocks.
  */
@@ -359,6 +360,7 @@ struct ufs_clk_gating {
 	struct device_attribute delay_attr;
 	struct device_attribute enable_attr;
 	bool is_enabled;
+	bool is_initialized;
 	int active_reqs;
 	struct workqueue_struct *clk_gating_workq;
 };
@@ -384,6 +386,7 @@ struct ufs_saved_pwr_info {
  * @resume_work: worker to resume devfreq
  * @is_enabled: tracks if scaling is currently enabled or not
  * @is_allowed: tracks if scaling is currently allowed or not
+ * @is_initialized: Indicates whether clock scaling is initialized or not
  * @is_busy_started: tracks if busy period has started or not
  * @is_suspended: tracks if devfreq is suspended or not
  */
@@ -399,6 +402,7 @@ struct ufs_clk_scaling {
 	struct work_struct resume_work;
 	bool is_enabled;
 	bool is_allowed;
+	bool is_initialized;
 	bool is_busy_started;
 	bool is_suspended;
 };
-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.


  parent reply	other threads:[~2020-12-13 16:33 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-12-13 16:31 [PATCH v4 0/3] Three changes related with UFS clock scaling Can Guo
2020-12-13 16:31 ` [PATCH v4 1/3] scsi: ufs: Protect some contexts from unexpected " Can Guo
2020-12-15  5:43   ` Stanley Chu
2020-12-18  6:26     ` Can Guo
2020-12-16 13:31   ` Bean Huo
2020-12-13 16:31 ` Can Guo [this message]
2020-12-15  5:55   ` [PATCH v4 2/3] scsi: ufs: Clean up ufshcd_exit_clk_scaling/gating() Stanley Chu
2020-12-16 14:18   ` Bean Huo
2020-12-13 16:31 ` [PATCH v4 3/3] scsi: ufs: Revert "Make sure clk scaling happens only when HBA is runtime ACTIVE" Can Guo
2020-12-15  6:15   ` Stanley Chu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1607877104-8916-3-git-send-email-cang@codeaurora.org \
    --to=cang@codeaurora.org \
    --cc=alim.akhtar@samsung.com \
    --cc=asutoshd@codeaurora.org \
    --cc=avri.altman@wdc.com \
    --cc=beanhuo@micron.com \
    --cc=bvanassche@acm.org \
    --cc=hongwus@codeaurora.org \
    --cc=jejb@linux.ibm.com \
    --cc=kernel-team@android.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=nguyenb@codeaurora.org \
    --cc=rnayak@codeaurora.org \
    --cc=salyzyn@google.com \
    --cc=saravanak@google.com \
    --cc=satyat@google.com \
    --cc=stanley.chu@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.