All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: dianders@chromium.org, bjorn.andersson@linaro.org,
	linus.walleij@linaro.org, mkshah@codeaurora.org,
	swboyd@chromium.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] pinctrl: qcom: Properly clear "intr_ack_high" interrupts when" failed to apply to 5.4-stable tree
Date: Mon, 25 Jan 2021 15:41:15 +0100	[thread overview]
Message-ID: <1611585675228156@kroah.com> (raw)


The patch below does not apply to the 5.4-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.

thanks,

greg k-h

------------------ original commit in Linus's tree ------------------

From a95881d6aa2c000e3649f27a1a7329cf356e6bb3 Mon Sep 17 00:00:00 2001
From: Douglas Anderson <dianders@chromium.org>
Date: Thu, 14 Jan 2021 19:16:23 -0800
Subject: [PATCH] pinctrl: qcom: Properly clear "intr_ack_high" interrupts when
 unmasking

In commit 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for
msm gpio") we tried to Ack interrupts during unmask.  However, that
patch forgot to check "intr_ack_high" so, presumably, it only worked
for a certain subset of SoCs.

Let's add a small accessor so we don't need to open-code the logic in
both places.

This was found by code inspection.  I don't have any access to the
hardware in question nor software that needs the Ack during unmask.

Fixes: 4b7618fdc7e6 ("pinctrl: qcom: Add irq_enable callback for msm gpio")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Maulik Shah <mkshah@codeaurora.org>
Tested-by: Maulik Shah <mkshah@codeaurora.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210114191601.v7.3.I32d0f4e174d45363b49ab611a13c3da8f1e87d0f@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 2f363c28d9d9..192ed31eabf4 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -96,6 +96,14 @@ MSM_ACCESSOR(intr_cfg)
 MSM_ACCESSOR(intr_status)
 MSM_ACCESSOR(intr_target)
 
+static void msm_ack_intr_status(struct msm_pinctrl *pctrl,
+				const struct msm_pingroup *g)
+{
+	u32 val = g->intr_ack_high ? BIT(g->intr_status_bit) : 0;
+
+	msm_writel_intr_status(val, pctrl, g);
+}
+
 static int msm_get_groups_count(struct pinctrl_dev *pctldev)
 {
 	struct msm_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
@@ -797,7 +805,7 @@ static void msm_gpio_irq_clear_unmask(struct irq_data *d, bool status_clear)
 	 * when the interrupt is not in use.
 	 */
 	if (status_clear)
-		msm_writel_intr_status(0, pctrl, g);
+		msm_ack_intr_status(pctrl, g);
 
 	val = msm_readl_intr_cfg(pctrl, g);
 	val |= BIT(g->intr_raw_status_bit);
@@ -890,7 +898,6 @@ static void msm_gpio_irq_ack(struct irq_data *d)
 	struct msm_pinctrl *pctrl = gpiochip_get_data(gc);
 	const struct msm_pingroup *g;
 	unsigned long flags;
-	u32 val;
 
 	if (test_bit(d->hwirq, pctrl->skip_wake_irqs)) {
 		if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
@@ -902,8 +909,7 @@ static void msm_gpio_irq_ack(struct irq_data *d)
 
 	raw_spin_lock_irqsave(&pctrl->lock, flags);
 
-	val = g->intr_ack_high ? BIT(g->intr_status_bit) : 0;
-	msm_writel_intr_status(val, pctrl, g);
+	msm_ack_intr_status(pctrl, g);
 
 	if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
 		msm_gpio_update_dual_edge_pos(pctrl, g, d);


             reply	other threads:[~2021-01-25 14:48 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-25 14:41 gregkh [this message]
2021-01-25 16:26 ` FAILED: patch "[PATCH] pinctrl: qcom: Properly clear "intr_ack_high" interrupts when" failed to apply to 5.4-stable tree Doug Anderson
2021-01-25 16:37   ` Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1611585675228156@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=dianders@chromium.org \
    --cc=linus.walleij@linaro.org \
    --cc=mkshah@codeaurora.org \
    --cc=stable@vger.kernel.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.