From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Linux 4.14.222
Date: Tue, 23 Feb 2021 15:00:09 +0100 [thread overview]
Message-ID: <16140888095787@kroah.com> (raw)
I'm announcing the release of the 4.14.222 kernel.
All users of the 4.14 kernel series must upgrade.
The updated 4.14.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-4.14.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Makefile | 9 ++
arch/arm/boot/dts/lpc32xx.dtsi | 3
arch/arm/kernel/signal.c | 14 ++-
arch/arm/xen/enlighten.c | 2
arch/arm/xen/p2m.c | 6 +
arch/arm64/boot/dts/rockchip/rk3399.dtsi | 2
arch/h8300/kernel/asm-offsets.c | 3
arch/mips/kernel/smp-bmips.c | 2
arch/x86/Makefile | 6 -
arch/x86/xen/p2m.c | 15 +---
drivers/block/xen-blkback/blkback.c | 30 ++++----
drivers/i2c/busses/i2c-stm32f7.c | 11 ++-
drivers/net/wireless/intel/iwlwifi/mvm/debugfs-vif.c | 3
drivers/net/wireless/intel/iwlwifi/mvm/ops.c | 3
drivers/net/wireless/intel/iwlwifi/pcie/tx.c | 5 +
drivers/net/xen-netback/netback.c | 4 -
drivers/net/xen-netback/rx.c | 9 ++
drivers/platform/x86/hp-wmi.c | 14 ++-
drivers/remoteproc/qcom_q6v5_pil.c | 11 ++-
drivers/scsi/qla2xxx/qla_tmpl.c | 9 +-
drivers/scsi/qla2xxx/qla_tmpl.h | 2
drivers/usb/dwc3/ulpi.c | 20 ++++-
drivers/usb/gadget/function/u_ether.c | 11 ++-
drivers/xen/gntdev.c | 33 ++++++---
drivers/xen/xen-scsiback.c | 4 -
drivers/xen/xenbus/xenbus.h | 1
drivers/xen/xenbus/xenbus_probe.c | 2
fs/fs-writeback.c | 2
fs/nfs/pnfs.c | 8 +-
fs/overlayfs/copy_up.c | 15 ++--
fs/overlayfs/inode.c | 2
fs/squashfs/export.c | 41 +++++++++--
fs/squashfs/id.c | 40 +++++++++--
fs/squashfs/squashfs_fs_sb.h | 1
fs/squashfs/super.c | 6 -
fs/squashfs/xattr.h | 10 ++
fs/squashfs/xattr_id.c | 66 ++++++++++++++++--
include/linux/backing-dev.h | 10 ++
include/linux/ftrace.h | 4 -
include/linux/netdevice.h | 2
include/linux/string.h | 4 +
include/linux/sunrpc/xdr.h | 3
include/trace/events/writeback.h | 35 ++++-----
include/xen/grant_table.h | 1
include/xen/xenbus.h | 2
kernel/bpf/stackmap.c | 2
kernel/trace/ftrace.c | 2
kernel/trace/trace.c | 2
kernel/trace/trace_events.c | 3
lib/string.c | 47 +++++++++++--
mm/backing-dev.c | 1
mm/memblock.c | 48 +------------
net/key/af_key.c | 6 -
net/netfilter/nf_conntrack_core.c | 3
net/netfilter/xt_recent.c | 12 ++-
net/sunrpc/auth_gss/auth_gss.c | 30 --------
net/sunrpc/auth_gss/auth_gss_internal.h | 45 ++++++++++++
net/sunrpc/auth_gss/gss_krb5_mech.c | 31 --------
net/vmw_vsock/af_vsock.c | 13 +--
net/vmw_vsock/hyperv_transport.c | 4 -
net/vmw_vsock/virtio_transport_common.c | 4 -
scripts/Makefile.build | 3
security/commoncap.c | 67 ++++++++++++-------
virt/kvm/kvm_main.c | 3
64 files changed, 514 insertions(+), 298 deletions(-)
Alain Volmat (1):
i2c: stm32f7: fix configuration of the digital filter
Alexandre Belloni (1):
ARM: dts: lpc32xx: Revert set default clock rate of HCLK PLL
Amir Goldstein (1):
ovl: skip getxattr of security labels
Andi Kleen (1):
trace: Use -mcount-record for dynamic ftrace
Arun Easi (1):
scsi: qla2xxx: Fix crash during driver load on big endian machines
Borislav Petkov (1):
x86/build: Disable CET instrumentation in the kernel for 32-bit too
Bui Quang Minh (1):
bpf: Check for integer overflow when using roundup_pow_of_two()
Cong Wang (1):
af_key: relax availability checks for skb size calculation
Dave Wysochanski (2):
SUNRPC: Move simple_get_bytes and simple_get_netobj into private header
SUNRPC: Handle 0 length opaque XDR object data properly
Edwin Peer (1):
net: watchdog: hold device global xmit lock during tx disable
Emmanuel Grumbach (1):
iwlwifi: pcie: add a NULL check in iwl_pcie_txq_unmap
Felipe Balbi (1):
usb: dwc3: ulpi: fix checkpatch warning
Florian Westphal (1):
netfilter: conntrack: skip identical origin tuple in same zone only
Greg Kroah-Hartman (1):
Linux 4.14.222
Greg Thelen (1):
tracing: Fix SKIP_STACK_VALIDATION=1 build due to bad merge with -mrecord-mcount
Hans de Goede (1):
platform/x86: hp-wmi: Disable tablet-mode reporting by default
Jaedon Shin (1):
MIPS: BMIPS: Fix section mismatch warning
Jan Beulich (8):
Xen/x86: don't bail early from clear_foreign_p2m_mapping()
Xen/x86: also check kernel mapping in set_foreign_p2m_mapping()
Xen/gntdev: correct dev_bus_addr handling in gntdev_map_grant_pages()
Xen/gntdev: correct error checking in gntdev_map_grant_pages()
xen-blkback: don't "handle" error by BUG()
xen-netback: don't "handle" error by BUG()
xen-scsiback: don't "handle" error by BUG()
xen-blkback: fix error handling in xen_blkbk_map()
Johannes Berg (2):
iwlwifi: mvm: take mutex for calling iwl_mvm_get_sync_time()
iwlwifi: mvm: guard against device removal in reprobe
John Greb (1):
USB: Gadget Ethernet: Re-enable Jumbo frames.
Jozsef Kadlecsik (1):
netfilter: xt_recent: Fix attempt to update deleted entry
Juergen Gross (1):
xen/netback: avoid race in xenvif_rx_ring_slots_available()
Julien Grall (1):
arm/xen: Don't probe xenbus as part of an early initcall
Lai Jiangshan (1):
kvm: check tlbs_dirty directly
Manish Narani (1):
usb: gadget: u_ether: Fix MTU size mismatch with RX packet size
Marc Zyngier (1):
arm64: dts: rockchip: Fix PCIe DT properties on rk3399
Miklos Szeredi (2):
ovl: perform vfs_getxattr() with mounter creds
cap: fix conversions on getxattr
Norbert Slusarek (1):
net/vmw_vsock: improve locking in vsock_connect_timeout()
Phillip Lougher (3):
squashfs: add more sanity checks in id lookup
squashfs: add more sanity checks in inode lookup
squashfs: add more sanity checks in xattr id lookup
Qian Cai (1):
include/trace/events/writeback.h: fix -Wstringop-truncation warnings
Randy Dunlap (1):
h8300: fix PREEMPTION build, TI_PRE_COUNT undefined
Roman Gushchin (1):
memblock: do not start bottom-up allocations with kernel_end
Russell King (1):
ARM: ensure the signal page contains defined contents
Serge Semin (1):
usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
Sibi Sankar (2):
remoteproc: qcom_q6v5_mss: Validate modem blob firmware size before load
remoteproc: qcom_q6v5_mss: Validate MBA firmware size before load
Stefano Garzarella (2):
vsock/virtio: update credit only if socket is not closed
vsock: fix locking in vsock_shutdown()
Stefano Stabellini (1):
xen/arm: don't ignore return errors from set_phys_to_machine
Steven Rostedt (VMware) (3):
fgraph: Initialize tracing_graph_pause at task creation
tracing: Do not count ftrace events in top level enable output
tracing: Check length before giving out the filter buffer
Theodore Ts'o (1):
memcg: fix a crash in wb_workfn when a device disappears
Tobin C. Harding (1):
lib/string: Add strscpy_pad() function
Trond Myklebust (1):
pNFS/NFSv4: Try to return invalid layout in pnfs_layout_process()
Vasily Gorbik (1):
tracing: Avoid calling cc-option -mrecord-mcount for every Makefile
next reply other threads:[~2021-02-23 14:03 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-23 14:00 Greg Kroah-Hartman [this message]
2021-02-23 14:00 ` Linux 4.14.222 Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16140888095787@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.