All of lore.kernel.org
 help / color / mirror / Atom feed
From: satya priya <skakit@codeaurora.org>
To: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Rob Herring <robh+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org, kgunda@codeaurora.org,
	satya priya <skakit@codeaurora.org>
Subject: [PATCH V2 3/5] arm64: dts: qcom: pmk8350: Add PMIC peripherals for pmk8350
Date: Thu,  1 Apr 2021 14:43:14 +0530	[thread overview]
Message-ID: <1617268396-1837-4-git-send-email-skakit@codeaurora.org> (raw)
In-Reply-To: <1617268396-1837-1-git-send-email-skakit@codeaurora.org>

Add PON, GPIO, RTC and other PMIC infra modules support for pmk8350.

Signed-off-by: satya priya <skakit@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/pmk8350.dtsi | 100 ++++++++++++++++++++++++++++++++++
 1 file changed, 100 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pmk8350.dtsi

diff --git a/arch/arm64/boot/dts/qcom/pmk8350.dtsi b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
new file mode 100644
index 0000000..13631f2
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmk8350.dtsi
@@ -0,0 +1,100 @@
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2021, The Linux Foundation. All rights reserved.
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735a.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pmr735b.h>
+
+&spmi_bus {
+	pmk8350: pmic@0 {
+		compatible = "qcom,pmk8350", "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmk8350_pon: pon@1300 {
+			compatible = "qcom,pm8998-pon";
+			reg = <0x1300>;
+
+			pwrkey {
+				compatible = "qcom,pmk8350-pwrkey";
+				interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_POWER>;
+			};
+
+			resin {
+				compatible = "qcom,pmk8350-resin";
+				interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+				linux,code = <KEY_VOLUMEDOWN>;
+			};
+		};
+
+		pmk8350_vadc: adc@3100 {
+			compatible = "qcom,spmi-adc7";
+			reg = <0x3100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "eoc-int-en-set";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+
+			pmk8350_die_temp {
+				reg = <PMK8350_ADC7_DIE_TEMP>;
+				label = "pmk8350_die_temp";
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pm8350_die_temp {
+				reg = <PM8350_ADC7_DIE_TEMP>;
+				label = "pm8350_die_temp";
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pmr735a_die_temp {
+				reg = <PMR735A_ADC7_DIE_TEMP>;
+				label = "pmr735a_die_temp";
+				qcom,pre-scaling = <1 1>;
+			};
+
+			pmr735b_die_temp {
+				reg = <PMR735B_ADC7_DIE_TEMP>;
+				label = "pmr735b_die_temp";
+				qcom,pre-scaling = <1 1>;
+			};
+		};
+
+		pmk8350_adc_tm: adc-tm@3400 {
+			compatible = "qcom,adc-tm7";
+			reg = <0x3400>;
+			interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "threshold";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			#thermal-sensor-cells = <1>;
+			status = "disabled";
+		};
+
+		pmk8350_gpios: gpios@b000 {
+			compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
+			reg = <0xb000>;
+			gpio-controller;
+			gpio-ranges = <&pmk8350_gpios 0 0 4>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmk8350_rtc: rtc@6100 {
+			compatible = "qcom,pmk8350-rtc";
+			reg = <0x6100>, <0x6200>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+		};
+	};
+};
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member 
of Code Aurora Forum, hosted by The Linux Foundation


  parent reply	other threads:[~2021-04-01  9:14 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-01  9:13 [PATCH V2 0/5] Add PMIC DT files for sc7280 satya priya
2021-04-01  9:13 ` [PATCH V2 1/5] arm64: dts: qcom: pm7325: Add PMIC peripherals for pm7325 satya priya
2021-04-02 17:35   ` Matthias Kaehlcke
2021-04-02 20:35     ` Matthias Kaehlcke
2021-04-07 15:29       ` skakit
2021-04-07 15:24     ` skakit
2021-04-01  9:13 ` [PATCH V2 2/5] arm64: dts: qcom: pm8350c: Add PMIC peripherals for pm8350c satya priya
2021-04-01  9:13 ` satya priya [this message]
2021-04-02 18:45   ` [PATCH V2 3/5] arm64: dts: qcom: pmk8350: Add PMIC peripherals for pmk8350 Matthias Kaehlcke
2021-04-07 15:28     ` skakit
2021-04-01  9:13 ` [PATCH V2 4/5] arm64: dts: qcom: pmr735a: Add PMIC peripherals for pmr735a satya priya
2021-04-02 19:26   ` Matthias Kaehlcke
2021-04-07 15:29     ` skakit
2021-04-01  9:13 ` [PATCH V2 5/5] arm64: dts: sc7280: Include PMIC DT files for sc7280 satya priya
2021-04-04 17:41 ` [PATCH V2 0/5] Add " Bjorn Andersson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1617268396-1837-4-git-send-email-skakit@codeaurora.org \
    --to=skakit@codeaurora.org \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=kgunda@codeaurora.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.