[Buildroot] build for ARM926EJ-S fails with kernel-patches-2.6.24

[paradoxxa <paradoxxa2001@web.de>]

Ok, i will try this.
Thank you very much for your help.
Best Regards


Ulf Samuelsson-4 wrote:
> 
> 
>> 
>> Hi Ulf Samuelsson,
>> here is the full .config
>> Best Regards
>> 
>> #
>> # Automatically generated make config: don't edit
>> # Tue Mar 18 10:10:04 2008
>> #
>> BR2_HAVE_DOT_CONFIG=y
>> BR2_VERSION="0.10.0-svn"
>> # BR2_alpha is not set
>> BR2_arm=y
>> BR2_arm926t=y
>> BR2_ARM_TYPE="ARM926T"
>> BR2_ARM_EABI=y
>> BR2_ARCH="arm"
>> BR2_ENDIAN="LITTLE"
>> BR2_GCC_TARGET_TUNE="arm9tdmi"
>> 
> 
> [snip]
> 
>> #
>> # Preset Devices
>> #
>> # BR2_TARGET_ARM is not set
>> # BR2_TARGET_ATMEL is not set
>> # BR2_TARGET_SHARP is not set
>> 
>> 
> 
> 
> Since you do not have $(BOARD_PATH) defined, something will break.
> This is only set, if you select a target.
> 
> Suggest you start from scratch by doing 
> 
> mv .config .config.original
> touch .config
> make at91sam9260dfc_defconfig.
> 
> then change the stuff as you need.
> 
> This will ensure that the 
> I noted that you are using an x86 based linux configuration and that will
> never work.
> 
> Best Regards
> Ulf Samuelsson
> 
> _______________________________________________
> buildroot mailing list
> buildroot at uclibc.org
> http://busybox.net/mailman/listinfo/buildroot
> 
> 

-- 
View this message in context: http://www.nabble.com/build-for-ARM926EJ-S-fails-with-kernel-patches-2.6.24-tp16119611p16180137.html
Sent from the BuildRoot mailing list archive at Nabble.com.