From: Li Jun <jun.li@nxp.com>
To: gregkh@linuxfoundation.org, stern@rowland.harvard.edu,
mathias.nyman@intel.com
Cc: peter.chen@kernel.org, jun.li@nxp.com, jackp@codeaurora.org,
linux-usb@vger.kernel.org, linux-imx@nxp.com
Subject: [PATCH v3 1/3] usb: host: move EH SINGLE_STEP_SET_FEATURE implementation to core
Date: Fri, 7 May 2021 14:58:00 +0800 [thread overview]
Message-ID: <1620370682-10199-1-git-send-email-jun.li@nxp.com> (raw)
From: Peter Chen <peter.chen@nxp.com>
It is needed at USB Certification test for Embedded Host 2.0, and
the detail is at CH6.4.1.1 of On-The-Go and Embedded Host Supplement
to the USB Revision 2.0 Specification. Since other USB 2.0 capable
host like XHCI also need it, so move it to HCD core.
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
---
Change for v3:
- Add Alan's A-b tag.
Change for v2:
- No change.
drivers/usb/core/hcd.c | 134 ++++++++++++++++++++++++++++++++++
drivers/usb/host/ehci-hcd.c | 4 ++
drivers/usb/host/ehci-hub.c | 139 ------------------------------------
drivers/usb/host/ehci-q.c | 2 +-
include/linux/usb/hcd.h | 13 +++-
5 files changed, 151 insertions(+), 141 deletions(-)
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 6119fb41d736..d7eb9f179ca6 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -2110,6 +2110,140 @@ int usb_hcd_get_frame_number (struct usb_device *udev)
return hcd->driver->get_frame_number (hcd);
}
+/*-------------------------------------------------------------------------*/
+#ifdef CONFIG_USB_HCD_TEST_MODE
+
+static void usb_ehset_completion(struct urb *urb)
+{
+ struct completion *done = urb->context;
+
+ complete(done);
+}
+/*
+ * Allocate and initialize a control URB. This request will be used by the
+ * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages
+ * of the GetDescriptor request are sent 15 seconds after the SETUP stage.
+ * Return NULL if failed.
+ */
+static struct urb *request_single_step_set_feature_urb(
+ struct usb_device *udev,
+ void *dr,
+ void *buf,
+ struct completion *done)
+{
+ struct urb *urb;
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+ struct usb_host_endpoint *ep;
+
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb)
+ return NULL;
+
+ urb->pipe = usb_rcvctrlpipe(udev, 0);
+ ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out)
+ [usb_pipeendpoint(urb->pipe)];
+ if (!ep) {
+ usb_free_urb(urb);
+ return NULL;
+ }
+
+ urb->ep = ep;
+ urb->dev = udev;
+ urb->setup_packet = (void *)dr;
+ urb->transfer_buffer = buf;
+ urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
+ urb->complete = usb_ehset_completion;
+ urb->status = -EINPROGRESS;
+ urb->actual_length = 0;
+ urb->transfer_flags = URB_DIR_IN;
+ usb_get_urb(urb);
+ atomic_inc(&urb->use_count);
+ atomic_inc(&urb->dev->urbnum);
+ urb->setup_dma = dma_map_single(
+ hcd->self.sysdev,
+ urb->setup_packet,
+ sizeof(struct usb_ctrlrequest),
+ DMA_TO_DEVICE);
+ urb->transfer_dma = dma_map_single(
+ hcd->self.sysdev,
+ urb->transfer_buffer,
+ urb->transfer_buffer_length,
+ DMA_FROM_DEVICE);
+ urb->context = done;
+ return urb;
+}
+
+int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
+{
+ int retval = -ENOMEM;
+ struct usb_ctrlrequest *dr;
+ struct urb *urb;
+ struct usb_device *udev;
+ struct usb_device_descriptor *buf;
+ DECLARE_COMPLETION_ONSTACK(done);
+
+ /* Obtain udev of the rhub's child port */
+ udev = usb_hub_find_child(hcd->self.root_hub, port);
+ if (!udev) {
+ dev_err(hcd->self.controller, "No device attached to the RootHub\n");
+ return -ENODEV;
+ }
+ buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
+ if (!dr) {
+ kfree(buf);
+ return -ENOMEM;
+ }
+
+ /* Fill Setup packet for GetDescriptor */
+ dr->bRequestType = USB_DIR_IN;
+ dr->bRequest = USB_REQ_GET_DESCRIPTOR;
+ dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
+ dr->wIndex = 0;
+ dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
+ urb = request_single_step_set_feature_urb(udev, dr, buf, &done);
+ if (!urb)
+ goto cleanup;
+
+ /* Submit just the SETUP stage */
+ retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 1);
+ if (retval)
+ goto out1;
+ if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
+ usb_kill_urb(urb);
+ retval = -ETIMEDOUT;
+ dev_err(hcd->self.controller,
+ "%s SETUP stage timed out on ep0\n", __func__);
+ goto out1;
+ }
+ msleep(15 * 1000);
+
+ /* Complete remaining DATA and STATUS stages using the same URB */
+ urb->status = -EINPROGRESS;
+ usb_get_urb(urb);
+ atomic_inc(&urb->use_count);
+ atomic_inc(&urb->dev->urbnum);
+ retval = hcd->driver->submit_single_step_set_feature(hcd, urb, 0);
+ if (!retval && !wait_for_completion_timeout(&done,
+ msecs_to_jiffies(2000))) {
+ usb_kill_urb(urb);
+ retval = -ETIMEDOUT;
+ dev_err(hcd->self.controller,
+ "%s IN stage timed out on ep0\n", __func__);
+ }
+out1:
+ usb_free_urb(urb);
+cleanup:
+ kfree(dr);
+ kfree(buf);
+ return retval;
+}
+EXPORT_SYMBOL_GPL(ehset_single_step_set_feature);
+#endif /* CONFIG_USB_HCD_TEST_MODE */
+
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_PM
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 94b5e64ae9a2..35eec0c0edcd 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1238,6 +1238,10 @@ static const struct hc_driver ehci_hc_driver = {
* device support
*/
.free_dev = ehci_remove_device,
+#ifdef CONFIG_USB_HCD_TEST_MODE
+ /* EH SINGLE_STEP_SET_FEATURE test support */
+ .submit_single_step_set_feature = ehci_submit_single_step_set_feature,
+#endif
};
void ehci_init_driver(struct hc_driver *drv,
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 159cc27b1a36..c4f6a2559a98 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -726,145 +726,6 @@ ehci_hub_descriptor (
desc->wHubCharacteristics = cpu_to_le16(temp);
}
-/*-------------------------------------------------------------------------*/
-#ifdef CONFIG_USB_HCD_TEST_MODE
-
-#define EHSET_TEST_SINGLE_STEP_SET_FEATURE 0x06
-
-static void usb_ehset_completion(struct urb *urb)
-{
- struct completion *done = urb->context;
-
- complete(done);
-}
-static int submit_single_step_set_feature(
- struct usb_hcd *hcd,
- struct urb *urb,
- int is_setup
-);
-
-/*
- * Allocate and initialize a control URB. This request will be used by the
- * EHSET SINGLE_STEP_SET_FEATURE test in which the DATA and STATUS stages
- * of the GetDescriptor request are sent 15 seconds after the SETUP stage.
- * Return NULL if failed.
- */
-static struct urb *request_single_step_set_feature_urb(
- struct usb_device *udev,
- void *dr,
- void *buf,
- struct completion *done
-) {
- struct urb *urb;
- struct usb_hcd *hcd = bus_to_hcd(udev->bus);
- struct usb_host_endpoint *ep;
-
- urb = usb_alloc_urb(0, GFP_KERNEL);
- if (!urb)
- return NULL;
-
- urb->pipe = usb_rcvctrlpipe(udev, 0);
- ep = (usb_pipein(urb->pipe) ? udev->ep_in : udev->ep_out)
- [usb_pipeendpoint(urb->pipe)];
- if (!ep) {
- usb_free_urb(urb);
- return NULL;
- }
-
- urb->ep = ep;
- urb->dev = udev;
- urb->setup_packet = (void *)dr;
- urb->transfer_buffer = buf;
- urb->transfer_buffer_length = USB_DT_DEVICE_SIZE;
- urb->complete = usb_ehset_completion;
- urb->status = -EINPROGRESS;
- urb->actual_length = 0;
- urb->transfer_flags = URB_DIR_IN;
- usb_get_urb(urb);
- atomic_inc(&urb->use_count);
- atomic_inc(&urb->dev->urbnum);
- urb->setup_dma = dma_map_single(
- hcd->self.sysdev,
- urb->setup_packet,
- sizeof(struct usb_ctrlrequest),
- DMA_TO_DEVICE);
- urb->transfer_dma = dma_map_single(
- hcd->self.sysdev,
- urb->transfer_buffer,
- urb->transfer_buffer_length,
- DMA_FROM_DEVICE);
- urb->context = done;
- return urb;
-}
-
-static int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
-{
- int retval = -ENOMEM;
- struct usb_ctrlrequest *dr;
- struct urb *urb;
- struct usb_device *udev;
- struct ehci_hcd *ehci = hcd_to_ehci(hcd);
- struct usb_device_descriptor *buf;
- DECLARE_COMPLETION_ONSTACK(done);
-
- /* Obtain udev of the rhub's child port */
- udev = usb_hub_find_child(hcd->self.root_hub, port);
- if (!udev) {
- ehci_err(ehci, "No device attached to the RootHub\n");
- return -ENODEV;
- }
- buf = kmalloc(USB_DT_DEVICE_SIZE, GFP_KERNEL);
- if (!buf)
- return -ENOMEM;
-
- dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL);
- if (!dr) {
- kfree(buf);
- return -ENOMEM;
- }
-
- /* Fill Setup packet for GetDescriptor */
- dr->bRequestType = USB_DIR_IN;
- dr->bRequest = USB_REQ_GET_DESCRIPTOR;
- dr->wValue = cpu_to_le16(USB_DT_DEVICE << 8);
- dr->wIndex = 0;
- dr->wLength = cpu_to_le16(USB_DT_DEVICE_SIZE);
- urb = request_single_step_set_feature_urb(udev, dr, buf, &done);
- if (!urb)
- goto cleanup;
-
- /* Submit just the SETUP stage */
- retval = submit_single_step_set_feature(hcd, urb, 1);
- if (retval)
- goto out1;
- if (!wait_for_completion_timeout(&done, msecs_to_jiffies(2000))) {
- usb_kill_urb(urb);
- retval = -ETIMEDOUT;
- ehci_err(ehci, "%s SETUP stage timed out on ep0\n", __func__);
- goto out1;
- }
- msleep(15 * 1000);
-
- /* Complete remaining DATA and STATUS stages using the same URB */
- urb->status = -EINPROGRESS;
- usb_get_urb(urb);
- atomic_inc(&urb->use_count);
- atomic_inc(&urb->dev->urbnum);
- retval = submit_single_step_set_feature(hcd, urb, 0);
- if (!retval && !wait_for_completion_timeout(&done,
- msecs_to_jiffies(2000))) {
- usb_kill_urb(urb);
- retval = -ETIMEDOUT;
- ehci_err(ehci, "%s IN stage timed out on ep0\n", __func__);
- }
-out1:
- usb_free_urb(urb);
-cleanup:
- kfree(dr);
- kfree(buf);
- return retval;
-}
-#endif /* CONFIG_USB_HCD_TEST_MODE */
/*-------------------------------------------------------------------------*/
int ehci_hub_control(
diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c
index a826715ae9bd..2cbf4f85bff3 100644
--- a/drivers/usb/host/ehci-q.c
+++ b/drivers/usb/host/ehci-q.c
@@ -1165,7 +1165,7 @@ submit_async (
* performed; TRUE - SETUP and FALSE - IN+STATUS
* Returns 0 if success
*/
-static int submit_single_step_set_feature(
+static int ehci_submit_single_step_set_feature(
struct usb_hcd *hcd,
struct urb *urb,
int is_setup
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index 96281cd50ff6..22c5d1c0acf3 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -409,7 +409,10 @@ struct hc_driver {
int (*find_raw_port_number)(struct usb_hcd *, int);
/* Call for power on/off the port if necessary */
int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable);
-
+ /* Call for SINGLE_STEP_SET_FEATURE Test for USB2 EH certification */
+#define EHSET_TEST_SINGLE_STEP_SET_FEATURE 0x06
+ int (*submit_single_step_set_feature)(struct usb_hcd *,
+ struct urb *, int);
};
static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd)
@@ -474,6 +477,14 @@ int usb_hcd_setup_local_mem(struct usb_hcd *hcd, phys_addr_t phys_addr,
struct platform_device;
extern void usb_hcd_platform_shutdown(struct platform_device *dev);
+#ifdef CONFIG_USB_HCD_TEST_MODE
+extern int ehset_single_step_set_feature(struct usb_hcd *hcd, int port);
+#else
+static inline int ehset_single_step_set_feature(struct usb_hcd *hcd, int port)
+{
+ return 0;
+}
+#endif /* CONFIG_USB_HCD_TEST_MODE */
#ifdef CONFIG_USB_PCI
struct pci_dev;
--
2.25.1
next reply other threads:[~2021-05-07 7:14 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-07 6:58 Li Jun [this message]
2021-05-07 6:58 ` [PATCH v3 2/3] usb: host: xhci: add EH SINGLE_STEP_SET_FEATURE Test for USB2 Li Jun
2021-06-11 9:18 ` Jun Li
2021-07-16 3:12 ` Jun Li
2021-07-16 14:35 ` Mathias Nyman
2021-08-21 10:34 ` Jun Li
2021-05-07 6:58 ` [PATCH v3 3/3] usb: core: hcd: use map_urb_for_dma for single step set feature urb Li Jun
2021-05-07 15:42 ` Alan Stern
2021-05-07 16:52 ` Jack Pham
2021-05-07 17:40 ` Alan Stern
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1620370682-10199-1-git-send-email-jun.li@nxp.com \
--to=jun.li@nxp.com \
--cc=gregkh@linuxfoundation.org \
--cc=jackp@codeaurora.org \
--cc=linux-imx@nxp.com \
--cc=linux-usb@vger.kernel.org \
--cc=mathias.nyman@intel.com \
--cc=peter.chen@kernel.org \
--cc=stern@rowland.harvard.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.