From: Maharaja Kennadyrajan <mkenna@codeaurora.org>
To: 000ath11k@lists.infradead.org, linux-wireless@vger.kernel.org
Cc: Maharaja Kennadyrajan <mkenna@codeaurora.org>
Subject: [PATCH v3 0/3] Add support to configure beacon tx mode
Date: Tue, 8 Jun 2021 20:34:00 +0530 [thread overview]
Message-ID: <1623164643-7803-1-git-send-email-mkenna@codeaurora.org> (raw)
Add support to configure the beacon tx mode as STAGGERED
or BURST mode via hostapd configuration during the AP
bring-up or via wpa_suppplicant configuration during MESH
bring-up.
Beacons can be sent out in burst(continuously in a single shot
one after another) or staggered (equally spread out over beacon
interval) mode.
V3: Addressed Johnson's comment on v2 patch.
V2: Addressed Johannes's comment on v1 patch.
Maharaja Kennadyrajan (3):
nl80211: Add support for beacon tx mode
mac80211: Add support for beacon tx mode
ath11k: Add support for beacon tx mode
drivers/net/wireless/ath/ath11k/mac.c | 10 +++++++---
include/net/cfg80211.h | 4 ++++
include/net/mac80211.h | 2 ++
include/uapi/linux/nl80211.h | 16 ++++++++++++++++
net/mac80211/cfg.c | 2 ++
net/wireless/nl80211.c | 9 +++++++++
6 files changed, 40 insertions(+), 3 deletions(-)
--
2.7.4
next reply other threads:[~2021-06-08 15:06 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-08 15:04 Maharaja Kennadyrajan [this message]
2021-06-08 15:04 ` [PATCH v3 1/3] nl80211: Add support for beacon tx mode Maharaja Kennadyrajan
2021-06-08 15:04 ` [PATCH v3 2/3] mac80211: " Maharaja Kennadyrajan
2021-06-08 15:04 ` [PATCH v3 3/3] ath11k: " Maharaja Kennadyrajan
2021-06-08 15:06 ` [PATCH v3 0/3] Add support to configure " Maharaja Kennadyrajan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1623164643-7803-1-git-send-email-mkenna@codeaurora.org \
--to=mkenna@codeaurora.org \
--cc=000ath11k@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.