[Xenomai-help] Re : Problem with rtdm_irq_request

[seb p <sebas_p2002@domain.hid>]

[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1.1: Type: text/plain; charset=utf-8, Size: 1682 bytes --]

I try with the last version of xenomai but it's the same problem.

I send you my code. 

Thank you for your help.

Seb.




________________________________
De : Philippe Gerum <rpm@xenomai.org>
À : seb p <sebas_p2002@domain.hid>
Cc : xenomai@xenomai.org© le : Lundi, 2 Février 2009, 9h52mn 27s
Objet : Re: [Xenomai-help] Problem with  rtdm_irq_request

seb p wrote:
> Hello,
> 
> I use a atmel card AT91SAM9260 and I install Linux 2.6.25 with xenomai
> 2.4.4. I am doing a RTDM serial driver. I use the function
> rtdm_irq_request
> <http://www.xenomai.org/documentation/trunk/html/api/group__rtdmirq.html#g9bb3d95218ac5261e4033fb0bf695073>
> with the routine rt_rs485_interrupt. The interrupt number is 7. The
> interrupt is enable when a carracter is in the buffer Rx and the
> programm execute the routine rt_rs485_interrupt. But in my programm,
> when a caracter is in the buffer Rx, the programm doesn't execute the
> routine and I must reboot the linux. The console don't answer.
> 
> Have you got an idea of the problem? Thanks.
>

Time is a scarce resource for everyone. With that in mind, please:

- do not report issues based on outdated Xenomai releases unless you made sure
that such issue also happens on the latest release. Xenomai 2.4.6.1 will happily
work over 2.6.25/arm.

- send an excerpt of your code that helps understanding the issue.

> Séb.
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Xenomai-help mailing list
> Xenomai-help@domain.hid> https://mail.gna.org/listinfo/xenomai-help


-- 
Philippe.



      

[-- Attachment #1.2: Type: text/html, Size: 2789 bytes --]

[-- Attachment #2: driver_serial_rt.tar.gz --]
[-- Type: application/x-gzip, Size: 4076 bytes --]