All of lore.kernel.org
 help / color / mirror / Atom feed
From: <gregkh@linuxfoundation.org>
To: mark.tomlinson@alliedtelesis.co.nz, gregkh@linuxfoundation.org,
	stable@vger.kernel.org
Subject: patch "usb: max-3421: Prevent corruption of freed memory" added to usb-linus
Date: Wed, 21 Jul 2021 09:49:12 +0200	[thread overview]
Message-ID: <1626853752172191@kroah.com> (raw)


This is a note to let you know that I've just added the patch titled

    usb: max-3421: Prevent corruption of freed memory

to my usb git tree which can be found at
    git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb.git
in the usb-linus branch.

The patch will show up in the next release of the linux-next tree
(usually sometime within the next 24 hours during the week.)

The patch will hopefully also be merged in Linus's tree for the
next -rc kernel release.

If you have any questions about this process, please let me know.


From b5fdf5c6e6bee35837e160c00ac89327bdad031b Mon Sep 17 00:00:00 2001
From: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Date: Fri, 25 Jun 2021 15:14:56 +1200
Subject: usb: max-3421: Prevent corruption of freed memory

The MAX-3421 USB driver remembers the state of the USB toggles for a
device/endpoint. To save SPI writes, this was only done when a new
device/endpoint was being used. Unfortunately, if the old device was
removed, this would cause writes to freed memory.

To fix this, a simpler scheme is used. The toggles are read from
hardware when a URB is completed, and the toggles are always written to
hardware when any URB transaction is started. This will cause a few more
SPI transactions, but no causes kernel panics.

Fixes: 2d53139f3162 ("Add support for using a MAX3421E chip as a host driver.")
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Mark Tomlinson <mark.tomlinson@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20210625031456.8632-1-mark.tomlinson@alliedtelesis.co.nz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
 drivers/usb/host/max3421-hcd.c | 44 +++++++++++-----------------------
 1 file changed, 14 insertions(+), 30 deletions(-)

diff --git a/drivers/usb/host/max3421-hcd.c b/drivers/usb/host/max3421-hcd.c
index e7a8e0609853..59cc1bc7f12f 100644
--- a/drivers/usb/host/max3421-hcd.c
+++ b/drivers/usb/host/max3421-hcd.c
@@ -153,8 +153,6 @@ struct max3421_hcd {
 	 */
 	struct urb *curr_urb;
 	enum scheduling_pass sched_pass;
-	struct usb_device *loaded_dev;	/* dev that's loaded into the chip */
-	int loaded_epnum;		/* epnum whose toggles are loaded */
 	int urb_done;			/* > 0 -> no errors, < 0: errno */
 	size_t curr_len;
 	u8 hien;
@@ -492,39 +490,17 @@ max3421_set_speed(struct usb_hcd *hcd, struct usb_device *dev)
  * Caller must NOT hold HCD spinlock.
  */
 static void
-max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum,
-		    int force_toggles)
+max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum)
 {
-	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
-	int old_epnum, same_ep, rcvtog, sndtog;
-	struct usb_device *old_dev;
+	int rcvtog, sndtog;
 	u8 hctl;
 
-	old_dev = max3421_hcd->loaded_dev;
-	old_epnum = max3421_hcd->loaded_epnum;
-
-	same_ep = (dev == old_dev && epnum == old_epnum);
-	if (same_ep && !force_toggles)
-		return;
-
-	if (old_dev && !same_ep) {
-		/* save the old end-points toggles: */
-		u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
-
-		rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
-		sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
-
-		/* no locking: HCD (i.e., we) own toggles, don't we? */
-		usb_settoggle(old_dev, old_epnum, 0, rcvtog);
-		usb_settoggle(old_dev, old_epnum, 1, sndtog);
-	}
 	/* setup new endpoint's toggle bits: */
 	rcvtog = usb_gettoggle(dev, epnum, 0);
 	sndtog = usb_gettoggle(dev, epnum, 1);
 	hctl = (BIT(rcvtog + MAX3421_HCTL_RCVTOG0_BIT) |
 		BIT(sndtog + MAX3421_HCTL_SNDTOG0_BIT));
 
-	max3421_hcd->loaded_epnum = epnum;
 	spi_wr8(hcd, MAX3421_REG_HCTL, hctl);
 
 	/*
@@ -532,7 +508,6 @@ max3421_set_address(struct usb_hcd *hcd, struct usb_device *dev, int epnum,
 	 * address-assignment so it's best to just always load the
 	 * address whenever the end-point changed/was forced.
 	 */
-	max3421_hcd->loaded_dev = dev;
 	spi_wr8(hcd, MAX3421_REG_PERADDR, dev->devnum);
 }
 
@@ -667,7 +642,7 @@ max3421_select_and_start_urb(struct usb_hcd *hcd)
 	struct max3421_hcd *max3421_hcd = hcd_to_max3421(hcd);
 	struct urb *urb, *curr_urb = NULL;
 	struct max3421_ep *max3421_ep;
-	int epnum, force_toggles = 0;
+	int epnum;
 	struct usb_host_endpoint *ep;
 	struct list_head *pos;
 	unsigned long flags;
@@ -777,7 +752,6 @@ max3421_select_and_start_urb(struct usb_hcd *hcd)
 			usb_settoggle(urb->dev, epnum, 0, 1);
 			usb_settoggle(urb->dev, epnum, 1, 1);
 			max3421_ep->pkt_state = PKT_STATE_SETUP;
-			force_toggles = 1;
 		} else
 			max3421_ep->pkt_state = PKT_STATE_TRANSFER;
 	}
@@ -785,7 +759,7 @@ max3421_select_and_start_urb(struct usb_hcd *hcd)
 	spin_unlock_irqrestore(&max3421_hcd->lock, flags);
 
 	max3421_ep->last_active = max3421_hcd->frame_number;
-	max3421_set_address(hcd, urb->dev, epnum, force_toggles);
+	max3421_set_address(hcd, urb->dev, epnum);
 	max3421_set_speed(hcd, urb->dev);
 	max3421_next_transfer(hcd, 0);
 	return 1;
@@ -1379,6 +1353,16 @@ max3421_urb_done(struct usb_hcd *hcd)
 		status = 0;
 	urb = max3421_hcd->curr_urb;
 	if (urb) {
+		/* save the old end-points toggles: */
+		u8 hrsl = spi_rd8(hcd, MAX3421_REG_HRSL);
+		int rcvtog = (hrsl >> MAX3421_HRSL_RCVTOGRD_BIT) & 1;
+		int sndtog = (hrsl >> MAX3421_HRSL_SNDTOGRD_BIT) & 1;
+		int epnum = usb_endpoint_num(&urb->ep->desc);
+
+		/* no locking: HCD (i.e., we) own toggles, don't we? */
+		usb_settoggle(urb->dev, epnum, 0, rcvtog);
+		usb_settoggle(urb->dev, epnum, 1, sndtog);
+
 		max3421_hcd->curr_urb = NULL;
 		spin_lock_irqsave(&max3421_hcd->lock, flags);
 		usb_hcd_unlink_urb_from_ep(hcd, urb);
-- 
2.32.0



                 reply	other threads:[~2021-07-21  7:50 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1626853752172191@kroah.com \
    --to=gregkh@linuxfoundation.org \
    --cc=mark.tomlinson@alliedtelesis.co.nz \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.