From: Anoob Joseph <anoobj@marvell.com>
To: Akhil Goyal <gakhil@marvell.com>,
Declan Doherty <declan.doherty@intel.com>,
Fan Zhang <roy.fan.zhang@intel.com>,
"Konstantin Ananyev" <konstantin.ananyev@intel.com>
Cc: Tejasree Kondoj <ktejasree@marvell.com>,
Jerin Jacob <jerinj@marvell.com>,
Archana Muniganti <marchana@marvell.com>,
Hemant Agrawal <hemant.agrawal@nxp.com>,
Radu Nicolau <radu.nicolau@intel.com>,
Ciara Power <ciara.power@intel.com>,
Gagandeep Singh <g.singh@nxp.com>, <dev@dpdk.org>,
Anoob Joseph <anoobj@marvell.com>
Subject: [dpdk-dev] [PATCH v3 2/3] crypto/cnxk: add IV in SA in lookaside IPsec debug mode
Date: Tue, 7 Sep 2021 21:47:41 +0530 [thread overview]
Message-ID: <1631031463-211-3-git-send-email-anoobj@marvell.com> (raw)
In-Reply-To: <1631031463-211-1-git-send-email-anoobj@marvell.com>
From: Tejasree Kondoj <ktejasree@marvell.com>
Adding IV in SA in lookaside IPsec debug mode. It helps
to verify lookaside PMD using known outbound vectors in
lookaside autotest.
Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
---
drivers/crypto/cnxk/cn10k_ipsec.c | 16 +++++++++
drivers/crypto/cnxk/cn10k_ipsec.h | 2 ++
drivers/crypto/cnxk/cn10k_ipsec_la_ops.h | 44 +++++++++++++++++++++++
drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c | 29 +++++++++++++--
drivers/crypto/cnxk/meson.build | 6 ++++
5 files changed, 95 insertions(+), 2 deletions(-)
diff --git a/drivers/crypto/cnxk/cn10k_ipsec.c b/drivers/crypto/cnxk/cn10k_ipsec.c
index 5c57cf2..ebb2a7e 100644
--- a/drivers/crypto/cnxk/cn10k_ipsec.c
+++ b/drivers/crypto/cnxk/cn10k_ipsec.c
@@ -57,6 +57,22 @@ cn10k_ipsec_outb_sa_create(struct roc_cpt *roc_cpt,
sa->inst.w7 = ipsec_cpt_inst_w7_get(roc_cpt, sa);
+#ifdef LA_IPSEC_DEBUG
+ /* Use IV from application in debug mode */
+ if (ipsec_xfrm->options.iv_gen_disable == 1) {
+ out_sa->w2.s.iv_src = ROC_IE_OT_SA_IV_SRC_FROM_SA;
+ if (crypto_xfrm->type == RTE_CRYPTO_SYM_XFORM_AEAD) {
+ sa->iv_offset = crypto_xfrm->aead.iv.offset;
+ sa->iv_length = crypto_xfrm->aead.iv.length;
+ }
+ }
+#else
+ if (ipsec_xfrm->options.iv_gen_disable != 0) {
+ plt_err("Application provided IV not supported");
+ return -ENOTSUP;
+ }
+#endif
+
/* Get Rlen calculation data */
ret = cnxk_ipsec_outb_rlens_get(&rlens, ipsec_xfrm, crypto_xfrm);
if (ret)
diff --git a/drivers/crypto/cnxk/cn10k_ipsec.h b/drivers/crypto/cnxk/cn10k_ipsec.h
index bc52c60..6f974b7 100644
--- a/drivers/crypto/cnxk/cn10k_ipsec.h
+++ b/drivers/crypto/cnxk/cn10k_ipsec.h
@@ -21,6 +21,8 @@ struct cn10k_ipsec_sa {
/** Pre-populated CPT inst words */
struct cnxk_cpt_inst_tmpl inst;
uint16_t max_extended_len;
+ uint16_t iv_offset;
+ uint8_t iv_length;
};
struct cn10k_sec_session {
diff --git a/drivers/crypto/cnxk/cn10k_ipsec_la_ops.h b/drivers/crypto/cnxk/cn10k_ipsec_la_ops.h
index fe91638..862476a 100644
--- a/drivers/crypto/cnxk/cn10k_ipsec_la_ops.h
+++ b/drivers/crypto/cnxk/cn10k_ipsec_la_ops.h
@@ -12,6 +12,41 @@
#include "cn10k_ipsec.h"
#include "cnxk_cryptodev.h"
+static inline void
+ipsec_po_sa_iv_set(struct cn10k_ipsec_sa *sess, struct rte_crypto_op *cop)
+{
+ uint64_t *iv = &sess->out_sa.iv.u64[0];
+ uint64_t *tmp_iv;
+
+ memcpy(iv, rte_crypto_op_ctod_offset(cop, uint8_t *, sess->iv_offset),
+ 16);
+ tmp_iv = (uint64_t *)iv;
+ *tmp_iv = rte_be_to_cpu_64(*tmp_iv);
+
+ tmp_iv = (uint64_t *)(iv + 1);
+ *tmp_iv = rte_be_to_cpu_64(*tmp_iv);
+}
+
+static inline void
+ipsec_po_sa_aes_gcm_iv_set(struct cn10k_ipsec_sa *sess,
+ struct rte_crypto_op *cop)
+{
+ uint8_t *iv = &sess->out_sa.iv.s.iv_dbg1[0];
+ uint32_t *tmp_iv;
+
+ memcpy(iv, rte_crypto_op_ctod_offset(cop, uint8_t *, sess->iv_offset),
+ 4);
+ tmp_iv = (uint32_t *)iv;
+ *tmp_iv = rte_be_to_cpu_32(*tmp_iv);
+
+ iv = &sess->out_sa.iv.s.iv_dbg2[0];
+ memcpy(iv,
+ rte_crypto_op_ctod_offset(cop, uint8_t *, sess->iv_offset + 4),
+ 4);
+ tmp_iv = (uint32_t *)iv;
+ *tmp_iv = rte_be_to_cpu_32(*tmp_iv);
+}
+
static __rte_always_inline int
process_outb_sa(struct rte_crypto_op *cop, struct cn10k_ipsec_sa *sess,
struct cpt_inst_s *inst)
@@ -24,6 +59,15 @@ process_outb_sa(struct rte_crypto_op *cop, struct cn10k_ipsec_sa *sess,
return -ENOMEM;
}
+#ifdef LA_IPSEC_DEBUG
+ if (sess->out_sa.w2.s.iv_src == ROC_IE_OT_SA_IV_SRC_FROM_SA) {
+ if (sess->out_sa.w2.s.enc_type == ROC_IE_OT_SA_ENC_AES_GCM)
+ ipsec_po_sa_aes_gcm_iv_set(sess, cop);
+ else
+ ipsec_po_sa_iv_set(sess, cop);
+ }
+#endif
+
/* Prepare CPT instruction */
inst->w4.u64 = sess->inst.w4;
inst->w4.s.dlen = rte_pktmbuf_pkt_len(m_src);
diff --git a/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c b/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c
index c4f7824..4b97639 100644
--- a/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c
+++ b/drivers/crypto/cnxk/cnxk_cryptodev_capabilities.c
@@ -807,7 +807,7 @@ static const struct rte_security_capability sec_caps_templ[] = {
.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
.mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
.direction = RTE_SECURITY_IPSEC_SA_DIR_INGRESS,
- .options = { 0 }
+ .options = { 0 },
},
.crypto_capabilities = NULL,
},
@@ -818,7 +818,7 @@ static const struct rte_security_capability sec_caps_templ[] = {
.proto = RTE_SECURITY_IPSEC_SA_PROTO_ESP,
.mode = RTE_SECURITY_IPSEC_SA_MODE_TUNNEL,
.direction = RTE_SECURITY_IPSEC_SA_DIR_EGRESS,
- .options = { 0 }
+ .options = { 0 },
},
.crypto_capabilities = NULL,
},
@@ -913,6 +913,24 @@ cnxk_sec_caps_update(struct rte_security_capability *sec_cap)
sec_cap->ipsec.options.udp_encap = 1;
}
+static void
+cn10k_sec_caps_update(struct rte_security_capability *sec_cap)
+{
+ if (sec_cap->ipsec.direction == RTE_SECURITY_IPSEC_SA_DIR_EGRESS) {
+#ifdef LA_IPSEC_DEBUG
+ sec_cap->ipsec.options.iv_gen_disable = 1;
+#endif
+ }
+}
+
+static void
+cn9k_sec_caps_update(struct rte_security_capability *sec_cap)
+{
+ if (sec_cap->ipsec.direction == RTE_SECURITY_IPSEC_SA_DIR_EGRESS) {
+ sec_cap->ipsec.options.iv_gen_disable = 1;
+ }
+}
+
void
cnxk_cpt_caps_populate(struct cnxk_cpt_vf *vf)
{
@@ -928,6 +946,13 @@ cnxk_cpt_caps_populate(struct cnxk_cpt_vf *vf)
vf->sec_caps[i].crypto_capabilities = vf->sec_crypto_caps;
cnxk_sec_caps_update(&vf->sec_caps[i]);
+
+ if (roc_model_is_cn10k())
+ cn10k_sec_caps_update(&vf->sec_caps[i]);
+
+ if (roc_model_is_cn9k())
+ cn9k_sec_caps_update(&vf->sec_caps[i]);
+
}
}
diff --git a/drivers/crypto/cnxk/meson.build b/drivers/crypto/cnxk/meson.build
index e40d132..437d208 100644
--- a/drivers/crypto/cnxk/meson.build
+++ b/drivers/crypto/cnxk/meson.build
@@ -24,3 +24,9 @@ sources = files(
deps += ['bus_pci', 'common_cnxk', 'security', 'eventdev']
includes += include_directories('../../../lib/net')
+
+if get_option('buildtype').contains('debug')
+ cflags += [ '-DLA_IPSEC_DEBUG' ]
+else
+ cflags += [ '-ULA_IPSEC_DEBUG' ]
+endif
--
2.7.4
next prev parent reply other threads:[~2021-09-07 16:18 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-08-16 5:59 [dpdk-dev] [PATCH 0/3] Add user specified IV with lookaside IPsec Anoob Joseph
2021-08-16 5:59 ` [dpdk-dev] [PATCH 1/3] security: support user specified IV Anoob Joseph
2021-08-16 5:59 ` [dpdk-dev] [PATCH 2/3] crypto/cnxk: add IV in SA in lookaside IPsec debug mode Anoob Joseph
2021-08-16 5:59 ` [dpdk-dev] [PATCH 3/3] test/crypto: add outbound known vector tests Anoob Joseph
2021-09-06 14:58 ` [dpdk-dev] [PATCH v2 0/3] Add user specified IV with lookaside IPsec Anoob Joseph
2021-09-06 14:58 ` [dpdk-dev] [PATCH v2 1/3] security: support user specified IV Anoob Joseph
2021-09-06 19:07 ` Akhil Goyal
2021-09-06 14:58 ` [dpdk-dev] [PATCH v2 2/3] crypto/cnxk: add IV in SA in lookaside IPsec debug mode Anoob Joseph
2021-09-06 19:08 ` Akhil Goyal
2021-09-06 14:58 ` [dpdk-dev] [PATCH v2 3/3] test/crypto: add outbound known vector tests Anoob Joseph
2021-09-06 19:09 ` Akhil Goyal
2021-09-07 16:17 ` [dpdk-dev] [PATCH v3 0/3] Add user specified IV with lookaside IPsec Anoob Joseph
2021-09-07 16:17 ` [dpdk-dev] [PATCH v3 1/3] security: support user specified IV Anoob Joseph
2021-09-16 11:14 ` Ananyev, Konstantin
2021-09-07 16:17 ` Anoob Joseph [this message]
2021-09-07 16:17 ` [dpdk-dev] [PATCH v3 3/3] test/crypto: add outbound known vector tests Anoob Joseph
2021-09-28 8:32 ` [dpdk-dev] [PATCH v3 0/3] Add user specified IV with lookaside IPsec Akhil Goyal
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1631031463-211-3-git-send-email-anoobj@marvell.com \
--to=anoobj@marvell.com \
--cc=ciara.power@intel.com \
--cc=declan.doherty@intel.com \
--cc=dev@dpdk.org \
--cc=g.singh@nxp.com \
--cc=gakhil@marvell.com \
--cc=hemant.agrawal@nxp.com \
--cc=jerinj@marvell.com \
--cc=konstantin.ananyev@intel.com \
--cc=ktejasree@marvell.com \
--cc=marchana@marvell.com \
--cc=radu.nicolau@intel.com \
--cc=roy.fan.zhang@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.