From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Re: Linux 5.14.2
Date: Wed, 8 Sep 2021 09:06:41 +0200 [thread overview]
Message-ID: <1631084800151162@kroah.com> (raw)
In-Reply-To: <1631084800230205@kroah.com>
diff --git a/Makefile b/Makefile
index 83d1f7c1fd30..9a2b00ecc6af 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 14
-SUBLEVEL = 1
+SUBLEVEL = 2
EXTRAVERSION =
NAME = Opossums on Parade
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 3878880469d1..b843902ad9fd 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -30,7 +30,7 @@ config XTENSA
select HAVE_DMA_CONTIGUOUS
select HAVE_EXIT_THREAD
select HAVE_FUNCTION_TRACER
- select HAVE_FUTEX_CMPXCHG if !MMU
+ select HAVE_FUTEX_CMPXCHG if !MMU && FUTEX
select HAVE_HW_BREAKPOINT if PERF_EVENTS
select HAVE_IRQ_TIME_ACCOUNTING
select HAVE_PCI
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 06130dc431a0..b234958f883a 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -377,27 +377,27 @@ static int hid_submit_ctrl(struct hid_device *hid)
len = hid_report_len(report);
if (dir == USB_DIR_OUT) {
usbhid->urbctrl->pipe = usb_sndctrlpipe(hid_to_usb_dev(hid), 0);
- usbhid->urbctrl->transfer_buffer_length = len;
if (raw_report) {
memcpy(usbhid->ctrlbuf, raw_report, len);
kfree(raw_report);
usbhid->ctrl[usbhid->ctrltail].raw_report = NULL;
}
} else {
- int maxpacket, padlen;
+ int maxpacket;
usbhid->urbctrl->pipe = usb_rcvctrlpipe(hid_to_usb_dev(hid), 0);
maxpacket = usb_maxpacket(hid_to_usb_dev(hid),
usbhid->urbctrl->pipe, 0);
if (maxpacket > 0) {
- padlen = DIV_ROUND_UP(len, maxpacket);
- padlen *= maxpacket;
- if (padlen > usbhid->bufsize)
- padlen = usbhid->bufsize;
+ len += (len == 0); /* Don't allow 0-length reports */
+ len = DIV_ROUND_UP(len, maxpacket);
+ len *= maxpacket;
+ if (len > usbhid->bufsize)
+ len = usbhid->bufsize;
} else
- padlen = 0;
- usbhid->urbctrl->transfer_buffer_length = padlen;
+ len = 0;
}
+ usbhid->urbctrl->transfer_buffer_length = len;
usbhid->urbctrl->dev = hid_to_usb_dev(hid);
usbhid->cr->bRequestType = USB_TYPE_CLASS | USB_RECIP_INTERFACE | dir;
diff --git a/drivers/media/usb/stkwebcam/stk-webcam.c b/drivers/media/usb/stkwebcam/stk-webcam.c
index a45d464427c4..0e231e576dc3 100644
--- a/drivers/media/usb/stkwebcam/stk-webcam.c
+++ b/drivers/media/usb/stkwebcam/stk-webcam.c
@@ -1346,7 +1346,7 @@ static int stk_camera_probe(struct usb_interface *interface,
if (!dev->isoc_ep) {
pr_err("Could not find isoc-in endpoint\n");
err = -ENODEV;
- goto error;
+ goto error_put;
}
dev->vsettings.palette = V4L2_PIX_FMT_RGB565;
dev->vsettings.mode = MODE_VGA;
@@ -1359,10 +1359,12 @@ static int stk_camera_probe(struct usb_interface *interface,
err = stk_register_video_device(dev);
if (err)
- goto error;
+ goto error_put;
return 0;
+error_put:
+ usb_put_intf(interface);
error:
v4l2_ctrl_handler_free(hdl);
v4l2_device_unregister(&dev->v4l2_dev);
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index 3c80bfbf3bec..d48bed5782a5 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -1164,10 +1164,8 @@ static int cp210x_set_chars(struct usb_serial_port *port,
kfree(dmabuf);
- if (result < 0) {
- dev_err(&port->dev, "failed to set special chars: %d\n", result);
+ if (result < 0)
return result;
- }
return 0;
}
@@ -1192,6 +1190,7 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
struct cp210x_flow_ctl flow_ctl;
u32 flow_repl;
u32 ctl_hs;
+ bool crtscts;
int ret;
/*
@@ -1219,8 +1218,10 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
chars.bXoffChar = STOP_CHAR(tty);
ret = cp210x_set_chars(port, &chars);
- if (ret)
- return;
+ if (ret) {
+ dev_err(&port->dev, "failed to set special chars: %d\n",
+ ret);
+ }
}
mutex_lock(&port_priv->mutex);
@@ -1249,14 +1250,14 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
flow_repl |= CP210X_SERIAL_RTS_FLOW_CTL;
else
flow_repl |= CP210X_SERIAL_RTS_INACTIVE;
- port_priv->crtscts = true;
+ crtscts = true;
} else {
ctl_hs &= ~CP210X_SERIAL_CTS_HANDSHAKE;
if (port_priv->rts)
flow_repl |= CP210X_SERIAL_RTS_ACTIVE;
else
flow_repl |= CP210X_SERIAL_RTS_INACTIVE;
- port_priv->crtscts = false;
+ crtscts = false;
}
if (I_IXOFF(tty)) {
@@ -1279,8 +1280,12 @@ static void cp210x_set_flow_control(struct tty_struct *tty,
flow_ctl.ulControlHandshake = cpu_to_le32(ctl_hs);
flow_ctl.ulFlowReplace = cpu_to_le32(flow_repl);
- cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
+ ret = cp210x_write_reg_block(port, CP210X_SET_FLOW, &flow_ctl,
sizeof(flow_ctl));
+ if (ret)
+ goto out_unlock;
+
+ port_priv->crtscts = crtscts;
out_unlock:
mutex_unlock(&port_priv->mutex);
}
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 930b3d50a330..f45ca7ddf78e 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -433,6 +433,7 @@ static int pl2303_detect_type(struct usb_serial *serial)
switch (bcdDevice) {
case 0x100:
case 0x305:
+ case 0x405:
/*
* Assume it's an HXN-type if the device doesn't
* support the old read request value.
diff --git a/fs/ext4/inline.c b/fs/ext4/inline.c
index 70cb64db33f7..24e994e75f5c 100644
--- a/fs/ext4/inline.c
+++ b/fs/ext4/inline.c
@@ -750,6 +750,12 @@ int ext4_write_inline_data_end(struct inode *inode, loff_t pos, unsigned len,
ext4_write_lock_xattr(inode, &no_expand);
BUG_ON(!ext4_has_inline_data(inode));
+ /*
+ * ei->i_inline_off may have changed since ext4_write_begin()
+ * called ext4_try_to_write_inline_data()
+ */
+ (void) ext4_find_inline_data_nolock(inode);
+
kaddr = kmap_atomic(page);
ext4_write_inline_data(inode, &iloc, kaddr, pos, len);
kunmap_atomic(kaddr);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index dfa09a277b56..970013c93d3e 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -5032,6 +5032,14 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
err = percpu_counter_init(&sbi->s_freeinodes_counter, freei,
GFP_KERNEL);
}
+ /*
+ * Update the checksum after updating free space/inode
+ * counters. Otherwise the superblock can have an incorrect
+ * checksum in the buffer cache until it is written out and
+ * e2fsprogs programs trying to open a file system immediately
+ * after it is mounted can fail.
+ */
+ ext4_superblock_csum_set(sb);
if (!err)
err = percpu_counter_init(&sbi->s_dirs_counter,
ext4_count_dirs(sb), GFP_KERNEL);
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 7d5883432085..a144a3f68e9e 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -1746,7 +1746,7 @@ static int snd_pcm_lib_ioctl_fifo_size(struct snd_pcm_substream *substream,
channels = params_channels(params);
frame_size = snd_pcm_format_size(format, channels);
if (frame_size > 0)
- params->fifo_size /= (unsigned)frame_size;
+ params->fifo_size /= frame_size;
}
return 0;
}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7ad689f991e7..70516527ebce 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -8438,6 +8438,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x87f2, "HP ProBook 640 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x87f4, "HP", ALC287_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x87f5, "HP", ALC287_FIXUP_HP_GPIO_LED),
+ SND_PCI_QUIRK(0x103c, 0x87f6, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP),
SND_PCI_QUIRK(0x103c, 0x87f7, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP),
SND_PCI_QUIRK(0x103c, 0x8805, "HP ProBook 650 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x880d, "HP EliteBook 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
@@ -9521,6 +9522,16 @@ static int patch_alc269(struct hda_codec *codec)
snd_hda_pick_fixup(codec, alc269_fixup_models,
alc269_fixup_tbl, alc269_fixups);
+ /* FIXME: both TX300 and ROG Strix G17 have the same SSID, and
+ * the quirk breaks the latter (bko#214101).
+ * Clear the wrong entry.
+ */
+ if (codec->fixup_id == ALC282_FIXUP_ASUS_TX300 &&
+ codec->core.vendor_id == 0x10ec0294) {
+ codec_dbg(codec, "Clear wrong fixup for ASUS ROG Strix G17\n");
+ codec->fixup_id = HDA_FIXUP_ID_NOT_SET;
+ }
+
snd_hda_pick_pin_fixup(codec, alc269_pin_fixup_tbl, alc269_fixups, true);
snd_hda_pick_pin_fixup(codec, alc269_fallback_pin_fixup_tbl, alc269_fixups, false);
snd_hda_pick_fixup(codec, NULL, alc269_fixup_vendor_tbl,
diff --git a/sound/usb/card.h b/sound/usb/card.h
index 6c0a052a28f9..5b19901f305a 100644
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -94,6 +94,7 @@ struct snd_usb_endpoint {
struct list_head ready_playback_urbs; /* playback URB FIFO for implicit fb */
unsigned int nurbs; /* # urbs */
+ unsigned int nominal_queue_size; /* total buffer sizes in URBs */
unsigned long active_mask; /* bitmask of active urbs */
unsigned long unlink_mask; /* bitmask of unlinked urbs */
char *syncbuf; /* sync buffer for all sync URBs */
@@ -187,6 +188,7 @@ struct snd_usb_substream {
} dsd_dop;
bool trigger_tstamp_pending_update; /* trigger timestamp being updated from initial estimate */
+ bool early_playback_start; /* early start needed for playback? */
struct media_ctl *media_ctl;
};
diff --git a/sound/usb/endpoint.c b/sound/usb/endpoint.c
index 4f856771216b..bf26c04cf471 100644
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -1126,6 +1126,10 @@ static int data_ep_set_params(struct snd_usb_endpoint *ep)
INIT_LIST_HEAD(&u->ready_list);
}
+ /* total buffer bytes of all URBs plus the next queue;
+ * referred in pcm.c
+ */
+ ep->nominal_queue_size = maxsize * urb_packs * (ep->nurbs + 1);
return 0;
out_of_memory:
@@ -1287,6 +1291,11 @@ int snd_usb_endpoint_configure(struct snd_usb_audio *chip,
* to be set up before parameter setups
*/
iface_first = ep->cur_audiofmt->protocol == UAC_VERSION_1;
+ /* Workaround for Sony WALKMAN NW-A45 DAC;
+ * it requires the interface setup at first like UAC1
+ */
+ if (chip->usb_id == USB_ID(0x054c, 0x0b8c))
+ iface_first = true;
if (iface_first) {
err = endpoint_set_interface(chip, ep, true);
if (err < 0)
diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
index 4e5031a68064..f5cbf61ac366 100644
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -614,6 +614,14 @@ static int snd_usb_pcm_prepare(struct snd_pcm_substream *substream)
subs->period_elapsed_pending = 0;
runtime->delay = 0;
+ /* check whether early start is needed for playback stream */
+ subs->early_playback_start =
+ subs->direction == SNDRV_PCM_STREAM_PLAYBACK &&
+ subs->data_endpoint->nominal_queue_size >= subs->buffer_bytes;
+
+ if (subs->early_playback_start)
+ ret = start_endpoints(subs);
+
unlock:
snd_usb_unlock_shutdown(chip);
return ret;
@@ -1394,7 +1402,7 @@ static void prepare_playback_urb(struct snd_usb_substream *subs,
subs->trigger_tstamp_pending_update = false;
}
- if (period_elapsed && !subs->running) {
+ if (period_elapsed && !subs->running && !subs->early_playback_start) {
subs->period_elapsed_pending = 1;
period_elapsed = 0;
}
@@ -1448,7 +1456,8 @@ static int snd_usb_substream_playback_trigger(struct snd_pcm_substream *substrea
prepare_playback_urb,
retire_playback_urb,
subs);
- if (cmd == SNDRV_PCM_TRIGGER_START) {
+ if (!subs->early_playback_start &&
+ cmd == SNDRV_PCM_TRIGGER_START) {
err = start_endpoints(subs);
if (err < 0) {
snd_usb_endpoint_set_callback(subs->data_endpoint,
prev parent reply other threads:[~2021-09-08 7:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-08 7:06 Linux 5.14.2 Greg Kroah-Hartman
2021-09-08 7:06 ` Greg Kroah-Hartman [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1631084800151162@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.