From: <gregkh@linuxfoundation.org>
To: eajames@linux.ibm.com, broonie@kernel.org
Cc: <stable@vger.kernel.org>
Subject: FAILED: patch "[PATCH] spi: fsi: Reduce max transfer size to 8 bytes" failed to apply to 5.10-stable tree
Date: Wed, 15 Sep 2021 14:48:40 +0200 [thread overview]
Message-ID: <16317101203945@kroah.com> (raw)
The patch below does not apply to the 5.10-stable tree.
If someone wants it applied there, or to any other stable or longterm
tree, then please email the backport, including the original git commit
id to <stable@vger.kernel.org>.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 34d34a56a5ea1e54a5af4f34c6ac9df724129351 Mon Sep 17 00:00:00 2001
From: Eddie James <eajames@linux.ibm.com>
Date: Fri, 16 Jul 2021 08:39:14 -0500
Subject: [PATCH] spi: fsi: Reduce max transfer size to 8 bytes
Security changes have forced the SPI controllers to be limited to
8 byte reads. Refactor the sequencing to just handle 8 bytes at a
time.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20210716133915.14697-2-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
diff --git a/drivers/spi/spi-fsi.c b/drivers/spi/spi-fsi.c
index 87f8829c3995..829770b8ec74 100644
--- a/drivers/spi/spi-fsi.c
+++ b/drivers/spi/spi-fsi.c
@@ -25,16 +25,11 @@
#define SPI_FSI_BASE 0x70000
#define SPI_FSI_INIT_TIMEOUT_MS 1000
-#define SPI_FSI_MAX_XFR_SIZE 2048
-#define SPI_FSI_MAX_XFR_SIZE_RESTRICTED 8
+#define SPI_FSI_MAX_RX_SIZE 8
+#define SPI_FSI_MAX_TX_SIZE 40
#define SPI_FSI_ERROR 0x0
#define SPI_FSI_COUNTER_CFG 0x1
-#define SPI_FSI_COUNTER_CFG_LOOPS(x) (((u64)(x) & 0xffULL) << 32)
-#define SPI_FSI_COUNTER_CFG_N2_RX BIT_ULL(8)
-#define SPI_FSI_COUNTER_CFG_N2_TX BIT_ULL(9)
-#define SPI_FSI_COUNTER_CFG_N2_IMPLICIT BIT_ULL(10)
-#define SPI_FSI_COUNTER_CFG_N2_RELOAD BIT_ULL(11)
#define SPI_FSI_CFG1 0x2
#define SPI_FSI_CLOCK_CFG 0x3
#define SPI_FSI_CLOCK_CFG_MM_ENABLE BIT_ULL(32)
@@ -76,8 +71,6 @@ struct fsi_spi {
struct device *dev; /* SPI controller device */
struct fsi_device *fsi; /* FSI2SPI CFAM engine device */
u32 base;
- size_t max_xfr_size;
- bool restricted;
};
struct fsi_spi_sequence {
@@ -241,7 +234,7 @@ static int fsi_spi_reset(struct fsi_spi *ctx)
return fsi_spi_write_reg(ctx, SPI_FSI_STATUS, 0ULL);
}
-static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
+static void fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
{
/*
* Add the next byte of instruction to the 8-byte sequence register.
@@ -251,8 +244,6 @@ static int fsi_spi_sequence_add(struct fsi_spi_sequence *seq, u8 val)
*/
seq->data |= (u64)val << seq->bit;
seq->bit -= 8;
-
- return ((64 - seq->bit) / 8) - 2;
}
static void fsi_spi_sequence_init(struct fsi_spi_sequence *seq)
@@ -261,71 +252,11 @@ static void fsi_spi_sequence_init(struct fsi_spi_sequence *seq)
seq->data = 0ULL;
}
-static int fsi_spi_sequence_transfer(struct fsi_spi *ctx,
- struct fsi_spi_sequence *seq,
- struct spi_transfer *transfer)
-{
- int loops;
- int idx;
- int rc;
- u8 val = 0;
- u8 len = min(transfer->len, 8U);
- u8 rem = transfer->len % len;
-
- loops = transfer->len / len;
-
- if (transfer->tx_buf) {
- val = SPI_FSI_SEQUENCE_SHIFT_OUT(len);
- idx = fsi_spi_sequence_add(seq, val);
-
- if (rem)
- rem = SPI_FSI_SEQUENCE_SHIFT_OUT(rem);
- } else if (transfer->rx_buf) {
- val = SPI_FSI_SEQUENCE_SHIFT_IN(len);
- idx = fsi_spi_sequence_add(seq, val);
-
- if (rem)
- rem = SPI_FSI_SEQUENCE_SHIFT_IN(rem);
- } else {
- return -EINVAL;
- }
-
- if (ctx->restricted && loops > 1) {
- dev_warn(ctx->dev,
- "Transfer too large; no branches permitted.\n");
- return -EINVAL;
- }
-
- if (loops > 1) {
- u64 cfg = SPI_FSI_COUNTER_CFG_LOOPS(loops - 1);
-
- fsi_spi_sequence_add(seq, SPI_FSI_SEQUENCE_BRANCH(idx));
-
- if (transfer->rx_buf)
- cfg |= SPI_FSI_COUNTER_CFG_N2_RX |
- SPI_FSI_COUNTER_CFG_N2_TX |
- SPI_FSI_COUNTER_CFG_N2_IMPLICIT |
- SPI_FSI_COUNTER_CFG_N2_RELOAD;
-
- rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, cfg);
- if (rc)
- return rc;
- } else {
- fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, 0ULL);
- }
-
- if (rem)
- fsi_spi_sequence_add(seq, rem);
-
- return 0;
-}
-
static int fsi_spi_transfer_data(struct fsi_spi *ctx,
struct spi_transfer *transfer)
{
int rc = 0;
u64 status = 0ULL;
- u64 cfg = 0ULL;
if (transfer->tx_buf) {
int nb;
@@ -363,16 +294,6 @@ static int fsi_spi_transfer_data(struct fsi_spi *ctx,
u64 in = 0ULL;
u8 *rx = transfer->rx_buf;
- rc = fsi_spi_read_reg(ctx, SPI_FSI_COUNTER_CFG, &cfg);
- if (rc)
- return rc;
-
- if (cfg & SPI_FSI_COUNTER_CFG_N2_IMPLICIT) {
- rc = fsi_spi_write_reg(ctx, SPI_FSI_DATA_TX, 0);
- if (rc)
- return rc;
- }
-
while (transfer->len > recv) {
do {
rc = fsi_spi_read_reg(ctx, SPI_FSI_STATUS,
@@ -439,6 +360,10 @@ static int fsi_spi_transfer_init(struct fsi_spi *ctx)
}
} while (seq_state && (seq_state != SPI_FSI_STATUS_SEQ_STATE_IDLE));
+ rc = fsi_spi_write_reg(ctx, SPI_FSI_COUNTER_CFG, 0ULL);
+ if (rc)
+ return rc;
+
rc = fsi_spi_read_reg(ctx, SPI_FSI_CLOCK_CFG, &clock_cfg);
if (rc)
return rc;
@@ -459,6 +384,7 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
{
int rc;
u8 seq_slave = SPI_FSI_SEQUENCE_SEL_SLAVE(mesg->spi->chip_select + 1);
+ unsigned int len;
struct spi_transfer *transfer;
struct fsi_spi *ctx = spi_controller_get_devdata(ctlr);
@@ -471,8 +397,7 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
struct spi_transfer *next = NULL;
/* Sequencer must do shift out (tx) first. */
- if (!transfer->tx_buf ||
- transfer->len > (ctx->max_xfr_size + 8)) {
+ if (!transfer->tx_buf || transfer->len > SPI_FSI_MAX_TX_SIZE) {
rc = -EINVAL;
goto error;
}
@@ -486,9 +411,13 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
fsi_spi_sequence_init(&seq);
fsi_spi_sequence_add(&seq, seq_slave);
- rc = fsi_spi_sequence_transfer(ctx, &seq, transfer);
- if (rc)
- goto error;
+ len = transfer->len;
+ while (len > 8) {
+ fsi_spi_sequence_add(&seq,
+ SPI_FSI_SEQUENCE_SHIFT_OUT(8));
+ len -= 8;
+ }
+ fsi_spi_sequence_add(&seq, SPI_FSI_SEQUENCE_SHIFT_OUT(len));
if (!list_is_last(&transfer->transfer_list,
&mesg->transfers)) {
@@ -496,7 +425,9 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
/* Sequencer can only do shift in (rx) after tx. */
if (next->rx_buf) {
- if (next->len > ctx->max_xfr_size) {
+ u8 shift;
+
+ if (next->len > SPI_FSI_MAX_RX_SIZE) {
rc = -EINVAL;
goto error;
}
@@ -504,10 +435,8 @@ static int fsi_spi_transfer_one_message(struct spi_controller *ctlr,
dev_dbg(ctx->dev, "Sequence rx of %d bytes.\n",
next->len);
- rc = fsi_spi_sequence_transfer(ctx, &seq,
- next);
- if (rc)
- goto error;
+ shift = SPI_FSI_SEQUENCE_SHIFT_IN(next->len);
+ fsi_spi_sequence_add(&seq, shift);
} else {
next = NULL;
}
@@ -541,9 +470,7 @@ error:
static size_t fsi_spi_max_transfer_size(struct spi_device *spi)
{
- struct fsi_spi *ctx = spi_controller_get_devdata(spi->controller);
-
- return ctx->max_xfr_size;
+ return SPI_FSI_MAX_RX_SIZE;
}
static int fsi_spi_probe(struct device *dev)
@@ -582,14 +509,6 @@ static int fsi_spi_probe(struct device *dev)
ctx->fsi = fsi;
ctx->base = base + SPI_FSI_BASE;
- if (of_device_is_compatible(np, "ibm,fsi2spi-restricted")) {
- ctx->restricted = true;
- ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE_RESTRICTED;
- } else {
- ctx->restricted = false;
- ctx->max_xfr_size = SPI_FSI_MAX_XFR_SIZE;
- }
-
rc = devm_spi_register_controller(dev, ctlr);
if (rc)
spi_controller_put(ctlr);
reply other threads:[~2021-09-15 12:48 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=16317101203945@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=broonie@kernel.org \
--cc=eajames@linux.ibm.com \
--cc=stable@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.