From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org, akpm@linux-foundation.org,
torvalds@linux-foundation.org, stable@vger.kernel.org
Cc: lwn@lwn.net, jslaby@suse.cz,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Subject: Linux 5.14.8
Date: Sun, 26 Sep 2021 14:50:05 +0200 [thread overview]
Message-ID: <1632660605165200@kroah.com> (raw)
I'm announcing the release of the 5.14.8 kernel.
All users of the 5.14 kernel series must upgrade.
The updated 5.14.y git tree can be found at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git linux-5.14.y
and can be browsed at the normal kernel.org git web browser:
https://git.kernel.org/?p=linux/kernel/git/stable/linux-stable.git;a=summary
thanks,
greg k-h
------------
Documentation/driver-api/cxl/memory-devices.rst | 2
Makefile | 2
arch/arm64/kernel/cacheinfo.c | 7
arch/arm64/mm/init.c | 16
arch/mips/kernel/cacheinfo.c | 7
arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts | 6
arch/riscv/kernel/cacheinfo.c | 7
arch/s390/include/asm/stacktrace.h | 20
arch/s390/include/asm/unwind.h | 8
arch/s390/kernel/entry.S | 4
arch/s390/kernel/setup.c | 10
arch/um/drivers/virtio_uml.c | 4
arch/um/kernel/skas/clone.c | 3
arch/x86/kernel/cpu/cacheinfo.c | 7
arch/x86/um/shared/sysdep/stub_32.h | 12
arch/x86/um/shared/sysdep/stub_64.h | 12
arch/x86/um/stub_segv.c | 3
block/blk-mq.c | 14
block/blk-throttle.c | 1
block/genhd.c | 9
drivers/acpi/x86/s2idle.c | 67
drivers/base/power/main.c | 2
drivers/block/n64cart.c | 4
drivers/cxl/Makefile | 4
drivers/cxl/core.c | 1067 ------------
drivers/cxl/core/Makefile | 5
drivers/cxl/core/bus.c | 1067 ++++++++++++
drivers/cxl/cxlmem.h | 96 +
drivers/cxl/mem.h | 81
drivers/cxl/pci.c | 67
drivers/cxl/pmem.c | 2
drivers/dma-buf/Kconfig | 2
drivers/dma/Kconfig | 4
drivers/dma/acpi-dma.c | 10
drivers/dma/idxd/device.c | 98 -
drivers/dma/idxd/idxd.h | 6
drivers/dma/idxd/irq.c | 16
drivers/dma/idxd/submit.c | 2
drivers/dma/idxd/sysfs.c | 22
drivers/dma/sprd-dma.c | 1
drivers/dma/xilinx/xilinx_dma.c | 2
drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c | 50
drivers/gpu/drm/amd/amdgpu/amdgpu_fdinfo.c | 11
drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c | 6
drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c | 17
drivers/gpu/drm/nouveau/nvkm/engine/device/ctrl.c | 2
drivers/gpu/drm/ttm/ttm_bo.c | 6
drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 1
drivers/infiniband/hw/mlx5/mr.c | 2
drivers/iommu/amd/init.c | 31
drivers/iommu/intel/svm.c | 15
drivers/misc/habanalabs/common/command_buffer.c | 2
drivers/misc/habanalabs/common/debugfs.c | 2
drivers/misc/habanalabs/common/device.c | 3
drivers/misc/habanalabs/common/habanalabs.h | 2
drivers/misc/habanalabs/common/habanalabs_drv.c | 8
drivers/misc/habanalabs/common/memory.c | 2
drivers/misc/habanalabs/common/mmu/mmu_v1.c | 12
drivers/misc/habanalabs/common/sysfs.c | 20
drivers/misc/habanalabs/gaudi/gaudi.c | 6
drivers/misc/habanalabs/goya/goya.c | 6
drivers/nvme/target/configfs.c | 3
drivers/of/property.c | 3
drivers/parisc/dino.c | 18
drivers/pci/controller/pci-aardvark.c | 67
drivers/pci/pci-bridge-emul.h | 2
drivers/platform/chrome/Makefile | 2
drivers/platform/chrome/cros_ec_sensorhub_ring.c | 14
drivers/platform/chrome/cros_ec_trace.h | 94 +
drivers/pwm/pwm-ab8500.c | 17
drivers/pwm/pwm-img.c | 16
drivers/pwm/pwm-lpc32xx.c | 10
drivers/pwm/pwm-mxs.c | 13
drivers/pwm/pwm-rockchip.c | 14
drivers/pwm/pwm-stm32-lp.c | 2
drivers/rtc/Kconfig | 1
drivers/staging/rtl8192u/r8192U_core.c | 2
drivers/staging/rtl8723bs/os_dep/ioctl_linux.c | 6
drivers/thermal/qcom/qcom-spmi-adc-tm5.c | 6
drivers/thermal/rcar_gen3_thermal.c | 7
drivers/thermal/samsung/exynos_tmu.c | 1
drivers/tty/vt/vt.c | 31
fs/btrfs/ioctl.c | 15
fs/btrfs/volumes.c | 48
fs/btrfs/volumes.h | 3
fs/ceph/caps.c | 75
fs/ceph/file.c | 32
fs/ceph/mds_client.c | 32
fs/ceph/metric.c | 4
fs/ceph/super.h | 6
fs/cifs/smb2ops.c | 20
fs/coredump.c | 4
fs/io_uring.c | 2
fs/nilfs2/sysfs.c | 26
fs/nilfs2/the_nilfs.c | 9
include/linux/cacheinfo.h | 18
include/linux/thermal.h | 5
include/uapi/misc/habanalabs.h | 4
init/initramfs.c | 2
init/main.c | 1
init/noinitramfs.c | 2
kernel/profile.c | 21
kernel/sched/idle.c | 4
kernel/sys.c | 7
kernel/trace/trace_boot.c | 6
lib/Kconfig.debug | 4
net/9p/trans_virtio.c | 4
net/sunrpc/svc_xprt.c | 13
security/selinux/hooks.c | 4
security/smack/smack_lsm.c | 4
sound/soc/generic/audio-graph-card.c | 6
tools/bootconfig/scripts/ftrace2bconf.sh | 4
tools/perf/tests/bpf.c | 2
tools/perf/util/dso.c | 10
tools/perf/util/symbol.c | 20
115 files changed, 2117 insertions(+), 1612 deletions(-)
Anand Jain (1):
btrfs: fix lockdep warning while mounting sprout fs
Andy Shevchenko (1):
dmaengine: acpi: Avoid comparison GSI with Linux vIRQ
Anson Jacob (1):
drm/amd/display: Fix memory leak reported by coverity
Ard Biesheuvel (1):
arm64: mm: limit linear region to 51 bits for KVM in nVHE mode
Arnd Bergmann (1):
thermal/core: Fix thermal_cooling_device_register() prototype
Ben Widawsky (1):
cxl: Move cxl_core to new directory
Cyrill Gorcunov (1):
prctl: allow to setup brk for et_dyn executables
Dan Carpenter (1):
thermal/drivers/exynos: Fix an error code in exynos_tmu_probe()
Dan Williams (1):
cxl/pci: Introduce cdevm_file_operations
Dave Jiang (5):
dmanegine: idxd: cleanup all device related bits after disabling device
dmaengine: idxd: have command status always set
dmaengine: idxd: fix wq slot allocation index check
dmaengine: idxd: fix abort status check
dmaengine: idxd: clear block on fault flag when clear wq
Enzo Matsumiya (1):
cifs: properly invalidate cached root handle when closing it
Fabio Aiuto (1):
staging: rtl8723bs: fix wpa_set_auth_algs() function
Fenghua Yu (2):
iommu/vt-d: Fix PASID leak in intel_svm_unbind_mm()
iommu/vt-d: Fix a deadlock in intel_svm_drain_prq()
Geert Uytterhoeven (4):
math: RATIONAL_KUNIT_TEST should depend on RATIONAL instead of selecting it
dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER
dma-buf: DMABUF_DEBUG should depend on DMA_SHARED_BUFFER
riscv: dts: microchip: mpfs-icicle: Fix serial console
Greg Kroah-Hartman (1):
Linux 5.14.8
Guenter Roeck (2):
parisc: Move pci_dev_is_behind_card_dino to where it is used
drm/nouveau/nvkm: Replace -ENOSYS with -ENODEV
Gwendal Grignou (2):
platform/chrome: sensorhub: Add trace events for sample
platform/chrome: cros_ec_trace: Fix format warnings
Hannes Reinecke (1):
nvmet: fixup buffer overrun in nvmet_subsys_attr_serial()
Hao Xu (1):
io_uring: fix off-by-one in BUILD_BUG_ON check of __REQ_F_LAST_BIT
Heiko Carstens (1):
s390/entry: make oklabel within CHKSTG macro local
Jeff Layton (4):
ceph: cancel delayed work instead of flushing on mdsc teardown
ceph: fix memory leak on decode error in ceph_handle_caps
ceph: request Fw caps before updating the mtime in ceph_write_iter
ceph: lockdep annotations for try_nonblocking_invalidate
Johannes Berg (4):
um: fix stub location calculation
um: virtio_uml: fix memory leak on init failures
dmaengine: idxd: depends on !UML
dmaengine: ioat: depends on !UML
Josef Bacik (2):
btrfs: update the bdev time directly when closing
btrfs: delay blkdev_put until after the device remove
Koba Ko (1):
drm/amdgpu: Disable PCIE_DPM on Intel RKL Platform
Kuninori Morimoto (1):
ASoC: audio-graph: respawn Platform Support
Li Jinlin (1):
blk-throttle: fix UAF by deleteing timer in blk_throtl_exit()
Luben Tuikov (1):
drm/amdgpu: Fixes to returning VBIOS RAS EEPROM address
Lukas Bulwahn (1):
Kconfig.debug: drop selecting non-existing HARDLOCKUP_DETECTOR_ARCH
Mario Limonciello (1):
ACPI: PM: s2idle: Run both AMD and Microsoft methods if both are supported
Masami Hiramatsu (2):
tools/bootconfig: Fix tracing_on option checking in ftrace2bconf.sh
tracing/boot: Fix to loop on only subkeys
Matthias Kaehlcke (1):
thermal/drivers/qcom/spmi-adc-tm5: Don't abort probing if a sensor is not used
Michael Petlan (1):
perf test: Fix bpf test sample mismatch reporting
Namhyung Kim (1):
perf tools: Allow build-id with trailing zeros
Nanyong Sun (6):
nilfs2: fix memory leak in nilfs_sysfs_create_device_group
nilfs2: fix NULL pointer in nilfs_##name##_attr_release
nilfs2: fix memory leak in nilfs_sysfs_create_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_delete_##name##_group
nilfs2: fix memory leak in nilfs_sysfs_create_snapshot_group
nilfs2: fix memory leak in nilfs_sysfs_delete_snapshot_group
Nathan Chancellor (1):
staging: rtl8192u: Fix bitwise vs logical operator in TranslateRxSignalStuff819xUsb()
NeilBrown (1):
SUNRPC: don't pause on incomplete allocation
Niklas Schnelle (1):
RDMA/mlx5: Fix xlt_chunk_align calculation
Niklas Söderlund (1):
thermal/drivers/rcar_gen3_thermal: Store TSC id as unsigned int
Ofir Bitton (1):
habanalabs: add validity check for event ID received from F/W
Omer Shpigelman (1):
habanalabs: add "in device creation" status
Pali Rohár (2):
PCI: pci-bridge-emul: Add PCIe Root Capabilities Register
PCI: aardvark: Fix reporting CRS value
Paul Moore (1):
selinux,smack: fix subjective/objective credential use mixups
Pavel Skripkin (1):
profiling: fix shift-out-of-bounds bugs
Philip Yang (1):
drm/amdgpu: fix fdinfo race with process exit
Prasad Sodagudi (1):
PM: sleep: core: Avoid setting power.must_resume to false
QiuXi (1):
coredump: fix memleak in dump_vma_snapshot()
Radhey Shyam Pandey (1):
dmaengine: xilinx_dma: Set DMA mask for coherent APIs
Rasmus Villemoes (1):
init: move usermodehelper_enable() to populate_rootfs()
Remi Bernon (1):
perf symbol: Look for ImageBase in PE file to compute .text offset
Saravana Kannan (1):
of: property: Disable fw_devlink DT support for X86
Sebastian Andrzej Siewior (1):
sched/idle: Make the idle timer expire in hard interrupt context
Song Liu (1):
blk-mq: allow 4x BLK_MAX_REQUEST_COUNT at blk_plug for multiple_queues
Sven Schnelle (1):
s390: add kmemleak annotation in stack_alloc()
Tetsuo Handa (1):
block: genhd: don't call blkdev_show() with major_names_lock held
Thomas Gleixner (1):
drivers: base: cacheinfo: Get rid of DEFINE_SMP_CALL_CACHE_FUNCTION()
Tomer Tayar (1):
habanalabs: fix nullifying of destroyed mmu pgt pool
Uwe Kleine-König (6):
pwm: ab8500: Fix register offset calculation to not depend on probe order
pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered
pwm: mxs: Don't modify HW state in .probe() after the PWM chip was registered
pwm: img: Don't modify HW state in .remove() callback
pwm: rockchip: Don't modify HW state in .remove() callback
pwm: stm32-lp: Don't modify HW state in .remove() callback
Vasily Gorbik (1):
s390/unwind: use current_frame_address() to unwind current task
Wei Huang (1):
iommu/amd: Relocate GAMSup check to early_enable_iommus
Xie Yongji (1):
9p/trans_virtio: Remove sysfs file on probe failure
Xiubo Li (1):
ceph: remove the capsnaps when removing caps
Yang Yingliang (1):
n64cart: fix return value check in n64cart_probe()
Yixing Liu (1):
RDMA/hns: Enable stash feature of HIP09
Yu-Tung Chang (1):
rtc: rx8010: select REGMAP_I2C
Yuri Nudelman (1):
habanalabs: fix mmu node address resolution in debugfs
Zhen Lei (1):
nilfs2: use refcount_dec_and_lock() to fix potential UAF
Zou Wei (1):
dmaengine: sprd: Add missing MODULE_DEVICE_TABLE
farah kassabri (1):
habanalabs: cannot sleep while holding spinlock
nick black (1):
console: consume APC, DM, DCS
xinhui pan (1):
drm/ttm: Fix a deadlock if the target BO is not idle during swap
next reply other threads:[~2021-09-26 12:50 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-09-26 12:50 Greg Kroah-Hartman [this message]
2021-09-26 12:50 ` Linux 5.14.8 Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1632660605165200@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=akpm@linux-foundation.org \
--cc=jslaby@suse.cz \
--cc=linux-kernel@vger.kernel.org \
--cc=lwn@lwn.net \
--cc=stable@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.