[PATCH v1] PCI: qcom: Fix incorrect register offset in pcie init

[Prasad Malisetty <pmaliset@codeaurora.org>]

In pcie_init_2_7_0 one of the register writes using incorrect offset
as per the platform register definitions (PCIE_PARF_AXI_MSTR_WR_ADDR_HALT
offset value should be 0x1A8 instead 0x178).
Update the correct offset value for SDM845 platform.

fixes: ed8cc3b1 ("PCI: qcom: Add support for SDM845 PCIe controller")

Signed-off-by: Prasad Malisetty <pmaliset@codeaurora.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 8a7a300..5bce152 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -1230,9 +1230,9 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie)
 	writel(val, pcie->parf + PCIE20_PARF_MHI_CLOCK_RESET_CTRL);
 
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
-		val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
+		val = readl(pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
 		val |= BIT(31);
-		writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT);
+		writel(val, pcie->parf + PCIE20_PARF_AXI_MSTR_WR_ADDR_HALT_V2);
 	}
 
 	return 0;
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project